Python library to interact with Behringer X32 digital mixing desk using OSC-messages (open sound control).
The Behringer X32 has quite good documentation of OSC-messages, but not all messages are documented. Messages that control what page the user has selected on the desk are not documented.
See http://www.behringer.com/EN/Products/X32.aspx
Using dumpmessages.py is quite easy to find some undocumented OSC-messages. Messages can also be captured by Wireshark and XControl, but using dumpmessages.py is easier.
This is just a listing of some undocumented messages. Most undocumented messages start with /-
/xremote
Used by the Behringer Windows-application XRemote to instruct the Behringer X32 to send all state changes to allow XRemote to follow all user selections.
-stat prefix is used to signal gui-things, like what fader layer is selected or the screen visible
OSCMessage("/-stat/chfaderbank", [0]): What main channel fader bank is selected
- 0: CH 1-16
- 1: CH 17-32
- 2: Aux in /USB / FX returns
- 3: Bus masters
OSCMessage("/-stat/grpfaderbank", [0]): Group channel bank selected
- 0: DCA 1-8
- 1: BUS 1-8
- 2: BUS 9-16
- 3: Matrix 1-6, Main C
OSCMessage("/-stat/selidx", [0]): Select channel index
- 0-31 Ch 1-32
- 32-63 Ch 33-64
- 64-47: Aux in /USB
- 48-63: Bus master
- 64-69: Matrix 1-6
- 70: L/R
- 71: Mono/Center
OSCMessage("/-stat/solosw/01", [0]): 0/1 Is on/off of soloswitch
- 01: Same id as used for selidx, but +1
OSCMessage("/-show/show/A/003/name", ['AAAAA']): Name of a show
OSCMessage("/-stat/screen/screen", [0]): Set active screen, eg. Home, Meters, Routing, Setup, Library
OSCMessage("/-stat/screen/screen", [6]): Monitor page (Monitor, talkback A, B and Osc)
OSCMessage("/-stat/screen/screen", [8]): Scene configuration screen
OSCMessage("/-stat/screen/screen", [9]): User bank configuration screen
OSCMessage("/-stat/screen/CHAN/page", [0]): Select channel page in "Home"-screen
OSCMessage("/-stat/screen/METER/page", [0]): Select meter page
OSCMessage("/-stat/screen/ROUTE/page", [1]): Routing page
OSCMessage("/-stat/screen/SETUP/page", [1])
OSCMessage("/-stat/screen/LIB/page", [0])
OSCMessage("/-stat/screen/FX/page", [1])
OSCMessage("/-stat/screen/mutegrp", [0]):
- 0: Turn off mutegrp screen
- 1: Turn on mutegrp screen
OSCMessage("/-stat/screen/utils", [0]):
- 0: Turn off utils screen
- 1: Turn on utils screen
OSCMessage("/-stat/userbank", [0]):
- 0: User bank A
- 1: User bank B
- 2: User bank C