netenglabs/suzieq

Issues

• [Feature]: Improve "No Peer Info" message for interface assert

  #969 opened a month ago by gioccher
  0

• [Bug]: IPv4 or IPv6 routes are parsed incorrectly when using or not using net.ipv4.nexthop_compat_mode on Cumulus Linux 5.8.0

  #968 opened 2 months ago by NerijusRazvodovskis
  0

• [Bug]: 'device show' shows devices marked as DEAD, but 'sqPoller show service=device shows no issues

  #967 opened 2 months ago by ejosh99
  0

• [Bug]: SafeConfigParser is now just Configparser

  #966 opened 2 months ago by mroe1234
  0

• [Bug]: sq-poller failed to run on MacOS in Docker

  #957 opened 7 months ago by greenfox878
  5

• [Housekeeping]: ciscoconfparse is deprecated

  #960 opened 5 months ago by mpenning
  0

• [Feature]: Extend REST Server with Poller Control, Env Based Config, Mulitple-API Keys and Key Permissions

  #959 opened 6 months ago by challey74
  0

• [Bug]: fxp interfaces in Juniper are not internal interfaces

  #958 opened 6 months ago by jeffmcadams
  0

• [Bug]: sq-poller timeout type mismatch with https transport

  #956 opened 7 months ago by gioccher
  0

• [Feature]: vSphere Support

  #928 opened 9 months ago by netgun
  15

• [Bug]: AttributeError: 'DataFrame' object has no attribute 'ifState' when loading default dashboard

  #929 opened 8 months ago by beufanet
  1

• [Feature]: custom netbox queries / add nautobot 2.X support

  #921 opened a year ago by gioccher
  0

• [Feature]: Cisco NX-OS: consider xcvr interfaces down instead of not connected

  #930 opened 8 months ago by beufanet
  1

• [Bug]: Python API with namespace parameter

  #925 opened 9 months ago by vsurresh
  0

• [Bug]: sq-poller results in " Unable to determine device type" for Juniper devices

  #924 opened 10 months ago by vinaypillutla
  0

• [Feature]: Kubernetes overlay tracking with CNI's like Cillium, Flannel, Calico

  #923 opened 10 months ago by jmessenger51
  1

• [Feature]: To support defining SuzieQ REST API parameters as environment variables when using SuzieQ Python API SDK

  #918 opened a year ago by kagarcia1618
  0

• [Feature]: Define a specific ssh config file

  #916 opened a year ago by matheorism
  0

• [Bug]: when transport https set, defaults to use port 22

  #865 opened a year ago by ryanmerolle
  0

• [Feature]: Remove Architecture Column from device show output and add Serial Number

  #878 opened a year ago by cldeluna
  0

• [Bug]: Cisco device parsing fails if hashes are in the login banner

  #915 opened a year ago by cdean00
  0

• [Bug]: Device status dead if Cisco IOS exec-timeout configured with lower value than SuzieQ polling period

  #913 opened a year ago by kagarcia1618
  0

• [Feature]: errDisabled count ports in interface summarize

  #879 opened a year ago by cldeluna
  0

• [Bug]: Trace page return abolute url in stead of relative on trace images

  #905 opened a year ago by PieterL75
  0

• [Bug]: _clean_junos_data KeyError: 'bootupTimestamp'

  #903 opened a year ago by PieterL75
  0

• [Bug]: _clean_junos_data throws AttributeError: 'list' object has no attribute 'lower'

  #902 opened a year ago by PieterL75
  0

• [Feature]: Route Summarization included in Route Summary

  #901 opened 2 years ago by cldeluna
  0

• [Bug]: wrong interface description for sub interfaces in junos

  #873 opened 2 years ago by mmarin11
  1

• [Docs]: ansible authentication information is ignored

  #874 opened 2 years ago by ipspace
  2

• [Docs]: Transport setting is ignored for Arista EOS devices listed in Ansible inventory

  #875 opened 2 years ago by ipspace
  2

• [Docs]: FileSystem stated as supported for nxos, textfsm config file is not configured for nxos

  #899 opened 2 years ago by heathdbrown
  2

• [Bug]: suzieq installed in pipx virtualenv using python3.8,python3.9 stating missing import uvloop

  #892 opened 2 years ago by heathdbrown
  1

• [Feature]: show current suzieq data-dir and settings

  #880 opened 2 years ago by cldeluna
  0

• [Bug]: Ansible inventory source requires ansible_user fact instead of using auths

  #867 opened 2 years ago by kingfetty
  2

• [Feature]: Poller Snapshot Mode in Configuration File

  #866 opened 2 years ago by rboucher-me
  0

• Poller session reset

  #864 opened 2 years ago by ryanmerolle
  0

• [Feature]: BGP peer description storage

  #863 opened 2 years ago by ryanmerolle
  0

• [Bug]: GUI with port 3000 won't start

  #847 opened 2 years ago by LucaNicosia
  0

• [Bug]: Juniper subscriber interfaces classified as type internal

  #854 opened 2 years ago by mazesys
  0

• [Bug]: sq-poller fails when using netbox for inventory and applying tag to more than 50 devices

  #848 opened 2 years ago by caballero-oscuro
  0

• [Bug]: Cumulus: after the first round the device service doesn't write the data for three consecutive rounds

  #844 opened 2 years ago by claudiolor
  0

• [Feature]: Add mac_count on vlan table

  #843 opened 2 years ago by PieterL75
  0

• [Feature]: Additional field configVlanList to interfaces table

  #837 opened 2 years ago by smf22
  0

• [Feature]: Add a Filter to shortcut determining interface state change over time

  #836 opened 2 years ago by cldeluna
  0

• [Bug]: Processing data failed for service vlan

  #808 opened 2 years ago by FloLaco
  10

• [Bug]: KeyError: 'version' when docker poller runs for JUNOS

  #803 opened 2 years ago by dd1245
  17

• [Docs]: Multiplex SSH session to jumphost

  #813 opened 2 years ago by FloLaco
  0

• [Bug]: Multiple pollers crash because of coalescer death

  #810 opened 2 years ago by FloLaco
  3

• [Bug]: Devices does not reflect inventory

  #809 opened 2 years ago by FloLaco
  4

• [Bug]: Hostname filter on path not working

  #801 opened 2 years ago by LucaNicosia
  0