nettigo/namf

Issues

• DS18B20

  #76 opened 7 months ago by repcio
  3

• InfluxDB upload doesn't use configured password

  #74 opened 7 months ago by repcio
  3

• NTP pool set to Europe

  #67 opened 2 years ago by MMBytes
  2

• [QUESTION] `data.json` with GPS data

  #78 opened 9 months ago by bieniu
  2

• Issues on ESP82668266 with 16MB flash

  #77 opened 10 months ago by danielskowronski
  4

• [feature] Read BH1750FVI I2C sensor / SEN-2096

  #73 opened a year ago by repcio
  2

• FR: Add WiFi signal level in web interface

  #72 opened a year ago by lemielek
  3

• InfluxDB 2.x support?

  #55 opened 3 years ago by BlueMahib
  1

• SDS011 reply checksum failed and freezing

  #69 opened a year ago by ggocsei
  4

• Network Broken/Device needs regular reboots after update to NAMF-2020-44

  #61 opened 2 years ago by jalogisch
  8

• NAM KIT loses BME280 and HECA data

  #68 opened a year ago by DaleBCooper
  1

• FR: reinitialize LCD display

  #71 opened a year ago by lemielek
  2

• HTTPS Custom API session broken during TLS handshake

  #70 opened a year ago by jdobes-cz
  1

• Calibration of BME280/SHT values

  #66 opened 2 years ago by Klarstein
  0

• Re-flash firmware

  #65 opened 2 years ago by Kreid4
  0

• SDS011 | Checksum failures | 16.92% 908/5365

  #59 opened 3 years ago by nonitex
  2

• No measurements from BME280 sensor

  #64 opened 2 years ago by piotrek-k
  3

• What is the WiFi password in config mode?

  #63 opened 2 years ago by wooyek
  1

• Switch for Onboard Status LED

  #62 opened 2 years ago by nonitex
  1

• Air pressure history not available if BMP180/280 is set to be inside case

  #60 opened 3 years ago by Leberer
  6

• Wifi stops when SDS fan stops

  #57 opened 3 years ago by Kreid4
  2

• How do I display debug information using NAMF-2020-43

  #56 opened 3 years ago by Kreid4
  3

• NAMF-2020-43: SDS011 stopped reading

  #54 opened 3 years ago by ProBackup-nl
  1

• Wifi connection problems after power loss

  #53 opened 3 years ago by JuliDi
  0

• Heating element operation with smoother temperature and humidy

  #51 opened 3 years ago by ProBackup-nl
  2

• BMP180 pressure reading is too high

  #52 opened 3 years ago by ProBackup-nl
  2

• Breadcrump "Home" on /values page is not linked

  #47 opened 3 years ago by ProBackup-nl
  0

• Disabling "Sent diagnostic data to Nettigo"

  #49 opened 3 years ago by ProBackup-nl
  1

• Improve hardware support "I2C RGB LED bar" documentation

  #50 opened 3 years ago by ProBackup-nl
  1

• Feature request: high gain carbon monoxide sensor support

  #48 opened 3 years ago by ProBackup-nl
  0

• Firmware date stamp is not visible

  #46 opened 3 years ago by ProBackup-nl
  0

• Problem with version software 42rc6 and sensor winsen mhz14a.

  #45 opened 3 years ago by icnmfabro
  3

• New feature: save readings for which the upload failed and retry on network reconnection

  #40 opened 3 years ago by dblachut
  16

• NTP server

  #44 opened 3 years ago by awbnet
  2

• [Feature request] Add MAC address to the `config.json`

  #43 opened 3 years ago by bieniu
  1

• Feature request: PM scaling factor

  #38 opened 4 years ago by sumerland
  1

• Wrong content type for `config.json` endpoint

  #42 opened 3 years ago by bieniu
  1

• Possible bug with version 41rc1 and Winsen MHZ14A - CO2 sensor

  #39 opened 3 years ago by icnmfabro
  6

• Stability issue with NAMF-2020-37

  #27 opened 3 years ago by komar007
  13

• SDS011 (with Luftdaten API disabled) not refreshing after upgrade to NAMF-2020-38

  #37 opened 4 years ago by pmendla
  10

• PMS5003 gives no reading after NAMF-2020-38

  #36 opened 4 years ago by blassepl
  5

• Status and future of BME280 as of 38-rc16

  #35 opened 4 years ago by sumerland
  3

• New feature: triggerActions/refreshReadings (after etering the page/clicking a button)

  #34 opened 4 years ago by dblachut
  2

• (Question) Is HECA duty cycle working properly?

  #33 opened 4 years ago by sumerland
  7

• [Feature request] Send device ID via mDNS

  #31 opened 4 years ago by bieniu
  7

• [Feature request] Show SHT3x data on display

  #32 opened 4 years ago by sumerland
  1

• 2020-38rc1 no longer displays the SDS011 data with the display 2004.

  #30 opened 4 years ago by icnmfabro
  4

• Strange DNS queries from NAM

  #26 opened 4 years ago by Rogacz
  1

• [Feature request] Add `uptime` to the `data.json` file

  #28 opened 4 years ago by bieniu
  1

• Device doesn't send mDNS after update to NAMF-2020-37

  #29 opened 4 years ago by bieniu
  2