Collection of ANSI codes to use on c++ streams
environment: Arduino
ANSI terminal codes allow setting cursor position, color and text styles like bold or italic.
#include <AnsiStream.h>
using namespace ANSI;
void setup() {
Serial.begin(115200);
while(!Serial);
Serial<<home()<<defaultBackground()<<defaultForeground();
Serial<<"ansi test "<<boldOn()<<"www.r-site.net"<<boldOff()<<endl;
Serial<<xy(1,2)<<"Time:";
}
void loop() {
Serial<<xy(7,2)<<setForegroundColor(RED)<<millis()/1000<<endl;
delay(100);
}the result can be seen on a linux system using the screen command.
screen /dev/ttyUSB0 115200
to quit the screen use CTRL+A + **
note: you will not be abble to use the arduino port while the screen utility is active.
The following entities can be used on streaming:
home() move cursor to home position.
xy(x,y) set cursor position.
up(n) move cursor up n lines, default to 1.
down(n) move cursor down n lines, defaults to 1.
forward(n) move cursor forward n characters, defaults to 1.
backward(n) move cursor back n characters, defaults to 1.
eraseLine deletes current line.
eraseScreen() clear the screen.
setBackgroundColor(c) set background color to be used.
setForegroundColor(c) set foreground color to be used.
fill(x1,y1,x2,y2,c) firl rectangular area with character c.
Set attributes to be used
boldOn() start bold text.
boldOff() end bold text.
italicsOn() start italic text.
italicsOff() end italic text.
underlineOn() start undelined text.
underlineOff() end underlined text.
strikethroughOn() start strikedout text.
strikethroughOff() end strikedout text.
inverseOn() start inverse text.
inverseOff() end inverse text.
reset() reset all attributes.
defaultBackground() use default background.
defaultForeground() use default foreground.
Colors can be numeric values (see ansi color codes online).
however some color codes are defined by this library as a comodity:
BLACK, RED, GREEN, YELLOW, BLUE, MAGENTA, CYAN, WHITE