nevermore3d/Nevermore_Micro
Activated Carbon Filters. Bad smells or fumes, or complaints thereof, should not keep you from being a maker!
Issues
- 0
cannot print the V6 Plenum 2020 - no layers?
#73 opened by kitkat0981 - 2
Unable to print V6 Cartridge built-in support
#59 opened by Lee-Arthur - 1
Why push air thrue filter?
#72 opened by Shedatheds - 2
- 0
V6 XL HEPA cartridge -- lower about 1 cm?
#69 opened by staspika - 0
V6 Wago connector clarifications
#68 opened by Tarakesh83 - 1
[CAD] Step file upload possible?
#66 opened by ndanyluk - 0
Wraping
#67 opened by mazimazurski - 1
Issue when mounting with kinematic supports
#52 opened by theodiem - 32
V6 Cartridge Lid Design
#43 opened by ptsiampas - 5
Improvements to the readme for new users
#27 opened by LiSongMWO - 1
- 2
V6 Jalousie instructions unclear
#51 opened by gx1400 - 2
V6 plenum for V0 with Winsinn fans
#53 opened by jwyse - 2
- 0
- 0
- 1
XL cartridge and jalousie not fit
#55 opened by Jessi810 - 1
CAD files for XL cartridge
#54 opened by Jessi810 - 4
the poke yoke tongue on the v6 cartridge doesn't actually stop reversal on the straight cart.
#49 opened by RedSinkDirty - 1
- 1
V6_Plenum[2020_extrusion] fan clips midair
#48 opened by AlbinoDeer - 1
V6 STL files have unprintable fragments
#38 opened by Vykori - 1
V6_Plenum[2020_extrusion].stl print issue
#46 opened by Marshalldog - 3
V6 Plenum wall too thin.
#47 opened by Matt2916 - 1
Missing fan hole supports in GDStime v0 model
#45 opened by Haxk20 - 1
Routing wires in V6?
#44 opened by VitalyBrusentsev - 2
v6 - please provide assembly photos
#42 opened by garyd9 - 2
- 2
- 1
Wago 221-2
#40 opened by Zay1Million - 1
Built in supports fail
#37 opened by kkingengineering - 4
[V6] Unsupported overhang issue on plenum
#35 opened by max-cz - 1
STL files are missing?
#34 opened by kkingengineering - 6
- 0
- 4
- 1
Size of the magnets to slide
#28 opened by 59marcopolo - 1
Update DUO_plenum.f3d with front edge chamfer
#15 opened by ChainsDD - 6
Artefacts in Nevermore Area
#11 opened by DietZnX - 0
Provide the f3d for the 6x3 magnet verion
#26 opened by jjfs127 - 1
Is the Mini abandonned ?
#25 opened by OmiCron07 - 3
- 1
- 1
Will Noctua fans fit?
#20 opened by cdmichaelb - 1
VOC Monitoring Question
#18 opened by MammothTanker114211 - 1
DUO XL 3mf slices without bottom
#13 opened by 00Roc - 1
Suggestion: Implement support for 3M bayonet-style filters, e.g. 6003 OV/AG, or similar
#10 opened by VIXIVIXIV - 3
- 1