UPM (Useful Packages & Modules) Sensor/Actuator repository for MRAA

The UPM repository provides software drivers for a wide variety of commonly used sensors and actuators. These software drivers interact with the underlying hardware platform (or microcontroller), as well as with the attached sensors, through calls to MRAA APIs.

Programmers can access the interfaces for each sensor by including the sensor’s corresponding header file and instantiating the associated sensor class. In the typical use case, a constructor initializes the sensor based on parameters that identify the sensor, the I/O protocol used and the pin location of the sensor.

C++ interfaces have been defined for the following sensor/actuator types, but they are subject to change:

Light controller
Light sensor
Temperature sensor
Humidity sensor
Pressure sensor
Gas sensor
Analog to digital converter

The developer community is encouraged to help expand the list of supported sensors and actuators and provide feedback on interface design.

Example

A sensor/actuator is expected to work as such (here is the MMA7660 accelerometer API):

  // Instantiate an MMA7660 on I2C bus 0
  upm::MMA7660 *accel = new upm::MMA7660(MMA7660_I2C_BUS,
                                         MMA7660_DEFAULT_I2C_ADDR);

  // place device in standby mode so we can write registers
  accel->setModeStandby();

  // enable 64 samples per second
  accel->setSampleRate(upm::MMA7660::AUTOSLEEP_64);
  
  // place device into active mode
  accel->setModeActive();

  while (shouldRun)
    {
      int x, y, z;
      
      accel->getRawValues(&x, &y, &z);
      cout << "Raw values: x = " << x 
           << " y = " << y
           << " z = " << z
           << endl;
      
      float ax, ay, az;
      
      accel->getAcceleration(&ax, &ay, &az);
      cout << "Acceleration: x = " << ax 
           << "g y = " << ay
           << "g z = " << az
           << "g" << endl;
      
      usleep(500000);
    }

Browse through the list of all examples.

Multi-sensor samples for the starter and specialized kits can be found in the iot-devkit-samples repository.

Supported Sensors

Supported sensor list from API documentation.

You can also refer to the Intel® IoT Developer Zone.

IDE Integration

If you would like to create projects and run the UPM samples using an Intel recommended IDE, please refer to the Intel Developer Zone IDE page.

Building UPM

See building documentation here.

Making your own UPM module

Porting link has more information on making new UPM modules.

There is also an example available gfor max31855 sensor.

Guide on creating Java bindings.

Naming conventions and rules for new UPM contributions

Before you begin development, take a look at our naming conventions.

Also, please read the guidelines for contributions to UPM.

Don't forget to check the documentation section.

Make sure you add yourself as an author on every new code file submitted. If you are providing a fix with significant changes, feel free to add yourself as a contributor. Signing-off your commits is mandatory.

API Documentation

API Compatibility

Even if we try our best not to, every once in a while we are forced to modify our API in a way that will break backwards compatibility. If you find yourself unable to compile code that was working fine before a library update, make sure you check the API changes section first.

NOTE - Our C++ header files changed extension from .h to .hpp!

Changelog

Version changelog here.

Known Limitations

List of known limitations here.

ngi644/upm