niceboygithub/AqaraGateway

Issues

• Does it support the magic switch v1 series?

  #317 opened 8 days ago by ritech
  0

• Motion Sensor Occupancy Timeout

  #316 opened 13 days ago by JCalvi
  1

• Wrong version number in 0.2.8

  #315 opened 13 days ago by JCalvi
  0

• 升级HA之后报错

  #310 opened a month ago by guoyuangy5
  5

• M1S Gen2 EU (HM1S-G02) telnet autostart

  #313 opened a month ago by eryxator
  1

• Network disconnected. Gateway cannot be connected.

  #312 opened 2 months ago by GavinIves
  9

• Aqara Gateway M1S Rgb Color

  #314 opened a month ago by akepax
  0

• Integration Light Issue

  #294 opened 2 months ago by Marxxu3ru
  0

• put m2 2022 poe in the readme

  #311 opened 2 months ago by GavinIves
  0

• 设置失败，将重试：None

  #292 opened 4 months ago by matrixchu
  8

• Fatal Same Issue as #292, M2 POE integration and Entities total dead if it lose connection

  #306 opened 2 months ago by artoodetoo3301
  8

• M1S AQARA lumi.gateway.acn008 support

  #304 opened 3 months ago by Cigareoc
  21

• G3 not adding to HA, and causing HA (maybe frontend) to reboot.

  #308 opened 2 months ago by tidegu
  0

• T1M, H1 吸頂燈無法調整亮度只能開關

  #305 opened 3 months ago by benshie5413
  1

• 无法控制浴霸调整模式

  #297 opened 4 months ago by shaquillehong
  1

• Upgrade Hub E1 Firmware to 4.1.8?

  #307 opened 2 months ago by sterlinm
  1

• 动作传感器的侦测时间间隔（超时时间）被固定在了90秒 The occupancy timeout for motion sensors is fixed at 90

  #281 opened 5 months ago by EricCorleone
  7

• Entity ID Conflict of two gateway

  #301 opened 3 months ago by Lunmingpei
  2

• Aqara M3, can you still telnet into it for Home Assistant?

  #303 opened 3 months ago by artoodetoo3301
  0

• HA GUI Can’t be accessed after AqaraGateway upgrade to 0.2.5 from HACS

  #270 opened 6 months ago by leeaash
  8

• CONDUCTIVITY s is a deprecated constant， will be Use UnitOfConductivity.MICROSIEMENS

  #293 opened 4 months ago by sxzcy
  0

• How to delete duplicated device if migrated from one gateway to the other?

  #296 opened 4 months ago by tidegu
  0

• Integration causing Homeassistant to crash.

  #258 opened 8 months ago by hxdx9527
  16

• The gateway unexpectedly forwarded a large number of data packets and went offline in both the Aqara and custom integrations

  #295 opened 4 months ago by AQ-Official
  0

• Regarding the issue of Yuba T1

  #285 opened 5 months ago by moliiiiiii
  2

• Aaqara m3 hub

  #283 opened 5 months ago by jrspowers
  1

• Request for support for device "Aqara Presence Sensor FP1E"

  #288 opened 4 months ago by dx0G
  1

• M1S 2022没有RGB灯实体吗

  #290 opened 4 months ago by fgprodigal
  1

• Blocks Home Assistant

  #272 opened 6 months ago by mixo44
  1

• New release broke the integration

  #268 opened 6 months ago by Kathou99
  4

• M1S操作设防和灯光不生效

  #289 opened 4 months ago by fgprodigal
  0

• This integration does not support configuration via the UI

  #286 opened 4 months ago by tidegu
  1

• 希望能支持下绿米的小乔集悦面板S1

  #287 opened 4 months ago by jagerzhang
  0

• Request for support for device "Aqara 智能墙壁插座T1"

  #282 opened 5 months ago by Lunmingpei
  0

• 是否可以让瞬时事件触发后立刻重置为None

  #275 opened 5 months ago by EricCorleone
  5

• 最新版ha对Action类别的瞬时事件并没有重置为None

  #279 opened 5 months ago by bugensui2022
  2

• Issues with device recognition for VRF T1 (aqara.airrtc.ecn001)

  #274 opened 6 months ago by AQ-Official
  1

• LED strip Controller(lumi.dimmer.rcbac1 ZNDDMK11LM

  #276 opened 6 months ago by AQ-Official
  0

• LED strip Controller(lumi.dimmer.rcbac1 ZNDDMK11LM) misidentified in dual color temperature mode

  #277 opened 6 months ago by AQ-Official
  0

• one entry for hub E1 but zero entity

  #262 opened 7 months ago by ithaqua974
  2

• Aqara Hub E1 doesn't show any devices and entities

  #273 opened 6 months ago by EricCorleone
  2

• Aqara Smart Knob H1 Switch (lumi.remote.rkba01) only have 3 automation trigger

  #271 opened 6 months ago by elliana-wt
  0

• connection error

  #269 opened 6 months ago by vachenli
  0

• Request to add a feature for synchronizing device names between the Aqara app and Home Assistant.

  #260 opened 7 months ago by maodun96
  1

• Timeout problem from 0.2.2+

  #256 opened 8 months ago by shummo
  1

• Offtop: Idea for Aqara g2h camera automation - play any sound

  #266 opened 6 months ago by almirus
  0

• My G2H PRO is bricked

  #265 opened 7 months ago by Guizzan
  5

• m1s Very high VSZ usage

  #263 opened 7 months ago by maodun96
  1

• Aqara n100 door lock sensors are in unknow state

  #253 opened 8 months ago by AlexBokhankovich
  7

• hacs上找不到aqaragateway

  #257 opened 8 months ago by xu-haozhe
  1