nickgammon/arduino_sketches

Issues

• Match the program to the maker at mega 64

  #91 opened 2 months ago by amirmicel
  2

• atmega 64a

  #92 opened 2 months ago by amirmicel
  1

• incompatibilities between hex uploader sketches

  #90 opened 3 months ago by Kingbuzz0
  1

• bootloader erased when using hex_uploader

  #58 opened 6 years ago by AdrienTouche
  17

• Incorrect Fuse manipulation of BOOTRST

  #89 opened 6 months ago by Kingbuzz0
  5

• Arduino 1.8.12 and Arduino 2.1 give ino file const error! Does not work!

  #88 opened a year ago by Alectronics
  8

• Atmega_Hex_Uploader_Fixed_Filename: Cannot read file

  #87 opened a year ago by noeldum
  8

• Options for Hex uploader to use same SPI bit banged port as Board Programmer

  #86 opened a year ago by noeldum
  1

• Atmega_Hex_Uploader need old SdFat version to compile

  #85 opened 2 years ago by noeldum
  2

• Can we program 8051 based MCU with these?

  #67 opened 2 years ago by HTerminal
  2

• ATMega2560 strange fuse issue when uploading hex with bootloaders

  #60 opened 2 years ago by AdrienTouche
  14

• Atmega_Hex_Uploader filenames

  #82 opened 2 years ago by SchneHa
  3

• Cannot enter programming mode in target chip

  #84 opened 2 years ago by ovehbe
  8

• Programming multiple devices

  #81 opened 2 years ago by gcormier
  1

• Arduino ATMega16u2

  #76 opened 2 years ago by camilosrz
  0

• Atmega328p from Korea v Thailand

  #75 opened 2 years ago by Ziggy2013
  1

• Trying to program multiple target arduino chip at once

  #71 opened 2 years ago by akshulg
  2

• Atmega_Board_Programmer Compilation Error on IDE 1.8.13

  #74 opened 2 years ago by skeptronus
  1

• Atmega_Board_Detector.ino not compiling

  #69 opened 2 years ago by A-Broadbent
  2

• Bootloading a 8MHz(External clock) 3.3V ATmega328P

  #65 opened 2 years ago by cglkr97
  10

• Failed to enter programming mode.

  #62 opened 2 years ago by anafereglez
  1

• Using EEPROM or PROGMEM for "fixed filename"

  #50 opened 2 years ago by LMDIGroup
  6

• Atmega8 support

  #53 opened 2 years ago by kapil-iitk
  7

• Import error when running the code

  #77 opened 2 years ago
  1

• Atmega_Hex_Uploader_Fixed_Filename: How to change the fuse setting?

  #83 opened 2 years ago by kapil-iitk
  8

• Reset circuit

  #78 opened 2 years ago by Micilera
  2

• Changing SD card by external SPI flash memory

  #80 opened 3 years ago by AntonioFromBrazil
  5

• Fixed Filename Uploader - Fusebits SOLVED!

  #79 opened 3 years ago by mega-hz
  13

• GSM Based FOTA Block Diagram

  #72 opened 4 years ago by akkoyun
  4

• Uploading .hex files - cannot obtain the directory listing off the SD card

  #70 opened 4 years ago by davsearle
  1

• Atmega_Board_Programmer:143:10: fatal error: HV_Pins.h: No such file or directory Error

  #64 opened 5 years ago by cglkr97
  5

• Doesn't work with Atmega328PB

  #63 opened 5 years ago by crobertsbmw
  2

• Atmega Hex Uploader through uart

  #61 opened 5 years ago by isnadh
  2

• Atmega_Hex_Uploader_Fixed_Filename and serial baud

  #57 opened 6 years ago by geologic
  1

• Atmega_Hex_Uploader_Fixed_Filename error codes

  #56 opened 6 years ago by geologic
  2

• is:issue is:open Modifying original sketch

  #55 opened 6 years ago by vsavic
  2

• Different (high fuse) boot start address

  #54 opened 6 years ago
  1

• A quick helpful update

  #52 opened 6 years ago by LMDIGroup
  1

• ATmega328PB not programming

  #51 opened 7 years ago by ryanoc3ros
  7

• Atmega_Self_Read_Signature not reading bootloader

  #39 opened 7 years ago by gknauf
  3

• Optiboot

  #38 opened 7 years ago by PRosenb
  9

• Atmega_Board_Detector patch

  #40 opened 7 years ago by gknauf
  1

• Use bootloader

  #41 opened 7 years ago by judavi
  2

• Board Detector: Add Attiny Bootloader Signatures

  #42 opened 7 years ago by prologician
  2

• Trying to identify a bootloader

  #46 opened 7 years ago by chupocro
  1

• Bootloader programmer fails to enter programming mode

  #48 opened 7 years ago by kxling
  2

• ATmega328PB bootloader

  #49 opened 7 years ago by djguy1
  9

• HEX uploader, on CrossRoads programmer: verification error when programming Mega2560 with bootloader

  #47 opened 7 years ago
  29

• Read/Write to target board EEPROM?

  #44 opened 8 years ago by DirtyEngineer
  6

• Verification error at address 7861. Got: 0x30 Expected: 0x94

  #43 opened 8 years ago by sineverba
  3