/ruby-enumerables-array-count-lab-chi01-seng-ft-091420

Primary LanguageRubyOtherNOASSERTION

Array Count Lab

Introduction

One of the most commonly used Enumerables happens to be one you might have already seen - count.

When dealing with Arrays, we can use count to find the total number of elements in the array.

[1, 2, 3].count # => 3

You may have noticed in some previous examples, instead of count, we might have used length.

[1, 2, 3].length # => 3

In fact, there is a third alias, size, that also works:

[1, 2, 3].size # => 3

For this sort of task - "reducing" an entire array of data down to a single value - the three terms are interchangeable.

However, count has additional functionality that length and size do not have. count is an Enumerable.

In this lesson, we're going to take a more in-depth look at count, why it is different than length and size, and how it is useful. At the end, you will be tasked with writing your own

count vs length and size

length and size are both built-in methods for Arrays that serve a single task - get the pre-computed total number of elements in a given array. That is all they do (though we've seen working with while loops that this alone can be pretty useful). Arrays always keep track of their size, and these methods access that information.

As we mentioned, count is an Enumerable. Enumerables are available to all Arrays, but operate a bit differently - they always enumerate; they move over elements in a collection one by one. count doesn't just ask an Array for information it already knows. It counts every element.

Because count goes through the work of enumerating over each element, we have some additional control over how it counts. We can do this by passing a block to count.

[1, 2, 3,].count do |element|
  # code in here runs every time count enumerates over an element
  # that element is available as the name we define inside the pipes above
end

A block in Ruby refers to code inside do...end or curly braces {}. We've seen them before with while loops. The code stored inside will run every time the block is called. In this case, the code will run for every element in the array count is called from. We can access the current element as whatever name we define inside the pipes after do. In this case, we used element, but we could choose whatever name we'd like.

In the block, we include code that will determine whether or not to count the current element. For instance, in an array of integers, maybe we only want to count elements that are even:

[1, 2, 3, 4].count do |element|
  element.even?
end

count will count every time the block returns a truthy value. In the case above, count is checking if each element is even, going through the array elements like so:

1.even? # => false
2.even? # => true
3.even? # => false
4.even? # => true

Since two expressions evaluate to true, count returns 2 as the result.

Haven't We Seen This Before?

If you recall, we implemented code for counting even values in an earlier lesson. Back then, we used while loops and wrote something similar to the following:

total = 0
array = [1, 2, 3, 4]
index = 0

while index < array.length do
  if array[index].even?
    total += 1 # total is only incremented when the current array element is even
  end
  index += 1
end
total

count provides a streamlined way to accomplish this task. Let's consider another example. Imagine we had an array of numbers, and we only wanted to count those that are positive.

array = [0, 1, -9, 24, 5, -10]

Using a while loop, we could modify the conditional statement to check if each element is greater than zero.

...
if array[index] > 0
  total += 1 # only increments when teh current element is greater than zero
end
...

Using count and a block, we do the same:

array.count do |num|
  num > 0
end
 # => 3

If we wanted to use the curly brace syntax instead:

array.count { |num| num > 0 }
  # => 3

Both forms are valid, though Rubyists tend to use do..end for readability if there are multiple lines of code in the block.

Instructions

It's time to practice what we've learned. For this lab, your task is to implement two methods using count. Complete your work in lib/array_count.rb and run learn to check your code.

count_strings

The count_strings method takes in an array of different data types, enumerates over them and returns the total number of Strings present in the array. For example, if we had the following array:

array = [1, "hello", [], 5.01, "world", :name, { a: 1 }]

Passed into count_strings, we should get 2 in return.

count_strings(array)
 # => 2

count_empty_strings

The count_empty_strings method is a slight variation on the last method - it takes in an array of different data types and returns the total number of empty Strings present. For example, if we had the following array:

array = [ "", "Hello", 4, [], "", "" ]

Passed into count_empty_strings, we should get 3 in return.

count_empty_strings(array)
 # => 3

Conclusion

The count Enumerable is handy way to count things in a specific way. Unlike the length and size array methods, count enumerates over every element in a collection. Because it enumerates, we can use a block to customize what count considers worthy of counting.

We will soon see that all the Enumerables we learn about will use a block this way. They all have the ability to step through a collection. At every step, they yield some control to us via a block.

Resources