nielsonm236/NetMod-ServerApp

Issues

• Suspect busy network generates too much Broadcast traffic for the ENC28J60 to handle

  #230 opened 8 months ago by nielsonm236
  2

• Add "Packets dropped due to exceeding MSS value" to Network Statistics page and Diagnostics Log

  #242 opened 5 months ago by nielsonm236
  0

• Add "Seconds since reboot" timestamp to Network Statistics page

  #241 opened 5 months ago by nielsonm236
  0

• Changing settings

  #221 opened a year ago by tomaszvil
  160

• Browser accessible Diagnostic Log

  #240 opened 6 months ago by nielsonm236
  0

• ENC28J60 Transmit Buffer over-sized

  #239 opened 6 months ago by nielsonm236
  0

• Code Cleanup: Remove Login code

  #238 opened 6 months ago by nielsonm236
  0

• Bug: Upgradeable code; Multiple Browser sessions may interfere with each other

  #237 opened 6 months ago by nielsonm236
  0

• Bug: URL command 0x74: "Erase entire I2C EEPROM" not working properly

  #236 opened 6 months ago by nielsonm236
  0

• Bug: I2C EEPROM initialization not working properly

  #235 opened 6 months ago by nielsonm236
  0

• 16 Relay Module compatibility with Network Modules V2

  #234 opened 7 months ago by joaoanlopes
  1

• Code Simplification: Reduce complications in check_I2C_EEPROM_ctr and t100ms_ctr usage

  #233 opened 8 months ago by nielsonm236
  0

• New "Connection Reset" with FireFox

  #232 opened 8 months ago by nielsonm236
  1

• Feature Request: Enable one or more A/D inputs already on the STM8S

  #224 opened 10 months ago by nielsonm236
  2

• Feature Request: Interface to SCD40 CO2, Temperature, Humidity sensor

  #227 opened 9 months ago by nielsonm236
  1

• Revise documentation around Network Statistics

  #231 opened 8 months ago by nielsonm236
  0

• Last will and availability after reconnect

  #228 opened 8 months ago by yozik04
  7

• Revise documentation around Link Error Status

  #229 opened 8 months ago by nielsonm236
  0

• Feature Request: Web Version: Get Temperature Data command

  #225 opened 9 months ago by guytpetj
  17

• Feature request: Add Login page

  #214 opened 10 months ago by nielsonm236
  3

• Bug: Browser-UPG load, pin 16 can't be used after power cycle

  #222 opened 10 months ago by dbaker1
  24

• Bug: Pattern filter not working correctly for Name entry field

  #220 opened 10 months ago by nielsonm236
  1

• Bug: When using Upgradeable builds will frequently see a "stack overflow error".

  #219 opened 10 months ago by nielsonm236
  1

• Domoticz: Bug - In upgradeable build loading the Code Uploader will over-write the Sensor IDX values

  #218 opened 10 months ago by nielsonm236
  1

• Domoticz: Bug found in POST processing. POST may be rejected and Configuration inputs ignored.

  #217 opened 10 months ago by nielsonm236
  1

• Code Uploader: feature request, auto-start the firmware when Flash Write and Verify completes

  #212 opened 10 months ago by nielsonm236
  2

• Feature request: It would be nice if the Configuration page shows if PCF8574 was detected

  #211 opened 10 months ago by nielsonm236
  2

• Domo BME code let's me check the DS18B20 feature box

  #210 opened 10 months ago by nielsonm236
  1

• Consider removing the HTONS and htons functionality to save Flash space

  #208 opened 10 months ago by nielsonm236
  2

• Provide a Browser message indicating "I2C EEPROM Missing" when the code load requires I2C EEPROM

  #204 opened 10 months ago by nielsonm236
  2

• Expand INA226 shunt resistor value options

  #203 opened 10 months ago by nielsonm236
  2

• If I2C EEPROM is missing and SWIM is used to load the Code Uploader no error is produced

  #195 opened 10 months ago by nielsonm236
  1

• Clean up code where SUPPORT_174 == 1 occurs

  #193 opened 10 months ago by nielsonm236
  2

• Need a URL command to set all IO pins to defaults

  #223 opened 10 months ago by nielsonm236
  0

• Logging

  #192 opened 10 months ago by jimo42
  5

• Add ability to select between the two most common INA226 module shunt resistor settings

  #194 opened 10 months ago by nielsonm236
  1

• Network Module becomes inaccessible if invalid IP address is entered for MQTT server

  #196 opened 2 years ago by nielsonm236
  2

• programing using SWIM

  #216 opened a year ago by TheArtizan
  6

• Reduce INA226 code size

  #213 opened a year ago by nielsonm236
  1

• OPTION BYTE reading failed

  #215 opened a year ago by techsd
  4

• HomeAssistant MQTT Breaking changes in 2023.8+

  #200 opened a year ago by yozik04
  6

• Domoticz with MQTT, request for new feature

  #199 opened a year ago by nielsonm236
  1

• Output pin change batch REST commands /50 and /51 broken in 20230801 release

  #201 opened a year ago by peoyli
  3

• Documentation: about 16 channel relay modules (starting on page 118)

  #202 opened a year ago by peoyli
  5

• BME280 build: When Altitude is entered in meters the IOControl display shows altitude "meters entered -1"

  #205 opened a year ago by nielsonm236
  1

• A small amount of Flash can be saved by removing the debug column in Javascript

  #206 opened a year ago by nielsonm236
  2

• Open the Wiki in a new tab

  #207 opened a year ago by nielsonm236
  1

• Domoticz with MQTT: Anyone have experience with this that can help another user?

  #198 opened 2 years ago by nielsonm236
  1

• File upload: Very bad WiFi connection causes upload failure and module hang

  #197 opened 2 years ago by nielsonm236
  0

• BME280: Negative altitude in Feet does not display properly

  #191 opened 2 years ago by nielsonm236
  1