/klipper-configuration

klipper-configuration

Setup

Clone this repository into ~/klipper_config_github:

cd ~/klipper_config
git clone https://github.com/nielsvz/klipper-configuration.git github

After cloning the repository make sure to include the main config file into printer.cfg:

echo '[include ../klipper_config/github/voron-2/main.cfg]' > ~/klipper_config/printer.cfg

Printers

Voron 2.4

Klipper config for Voron 2.4

  • Spider v1.0
  • 7x TMC2209
  • 0.9 degree steppers for A/B (LDO)
  • 1.8 degree steppers for Z (LDO)
  • 1.8 degree stepper for extruder (LDO / Bondtech LGX)

Dockable probe (temporary until merged with Klipper)

cd klipper
# Only add this remote if you haven't done so already.
git remote add mental https://github.com/mental405/klipper.git

# Force update on Klipper and checkout only the dockable_probe module
git fetch --prune --all
git reset --hard origin/master
git checkout mental/work-annex-probe klippy/extras/dockable_probe.py

Slicer configuration

Start gcode

PrusaSlicer:

M140 S0
M104 S0 ; uncomment to remove set&wait temp gcode added automatically after this start gcode
PRINT_START EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature] NOZZLE_SIZE=[nozzle_diameter] FILAMENT_TYPE=[filament_type] BED_MESH=0

SuperSlicer:

M190 S0
M109 S0
PRINT_START EXTRUDER_TEMP={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} BED_TEMP=[first_layer_bed_temperature] CHAMBER_TEMP=[chamber_temperature] NOZZLE_SIZE=[nozzle_diameter] FILAMENT_TYPE=[filament_type] BED_MESH=0

Cura 5.0:

PRINT_START EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0} NOZZLE_SIZE={machine_nozzle_size} FILAMENT_TYPE={material_type} CHAMBER={build_volume_temperature} BED_MESH=0

IdeaMaker

M104 S0
M140 S0
PRINT_START EXTRUDER_TEMP={temperature_extruder1} BED_TEMP={temperature_heatbed} NOZZLE_SIZE={machine_nozzle_diameter1} FILAMENT_TYPE={filament_name_abbreviation1} BED_MESH=0

End gcode

Any slicer:

PRINT_END