This repository contains projects where LittlevGL is configures for a development board or microcontroller.
Contributing is very welcome! Plaase, share with others if you used LittlevGL with a new board or MCU.
- Clone the repository somewhere:
git clone https://github.com/littlevgl/lv_boards.git - Step into the repository:
cd lv_boards - Initalize the submodules:
git submodule update --init - Copy/Paste a project where you want to use it (e.g. IDE workspace)
LittlevGL as an Arduino library. Copy arduino_library/littelvgl to your library folder Check the lvgl_test sketch to see the proting and usage
Driving an 320x240 TFT with ILI9432 controller via SPI using ESP32. The project is craeted in Eclipse using ESP IDF. (Getting started guide here) To link LittlevGL and lv_examples with ESP-IDF you need to add component.mk files to each directory. Rename lvgl_component.mk and lv_example_component.mk to component.mk and copy to the lvgl and lv_examples directories.
Cheap development board with 240x320 TFT, Resistive touch pad, 180 MHz MCU with 256kB RAM + 64 MBit SDRAM and GPU. The CubeMX drivers are used to initilaize the peripheries. In hal_stm_lvgl/tft/tft.h you can enable/disable external frame buffer placement and GPU usage.
STM development board with 800x480 TFT and MIPI DSI interface, capacitive touch screen, 180 MHz MCU with 324kB RAM + 128 MBit SDRAM and GPU. The CubeMX drivers are used to initilaize the peripheries. In hal_stm_lvgl/tft/tft.h you can enable/disable external frame buffer placement and GPU usage.
STM development board with 480x272 TFT, Capacitive touch pad, 216 MHz MCU with 320kB RAM + 64 MBit SDRAM and GPU.
The CubeMX drivers are used to initilaize the peripheries. Solution uses frame buffer placed in the external SRAM memory. GPU is configurable over USE_LV_GPU define.
To compile example go to Release directory and run make.
A custom PIC32MX695H based board drives a 480x320 display with R61581 display controller via software parallel port. The MCU has 512kB flash, 128 kB RAM and tuns at 80 MHz. It able to applay font anti-aliasing and even screen sized animations. Touch pad driver is not added yet.
A custom PIC32MX695H based board drives a 800x480 display with SSD1963 display controller via software parallel port. Still work in progrss.
Directly use Linux fame buffer (e.g. /dev/fb0) as frame buffer. Demonstrates the usage winth embedded Linux systems. The project is created in Eclipse CDT. Learn more here: LittlevGL Blog Post