My keymap for the CRKBD
Based on the mechboards r2g and mattsennas keymap.
Setup
First clone the qmk firmware repo:
git clone git@github.com:qmk/qmk_firmware.git
And follow the setup instructions on docs.qmk.fm or read up on QMK in general at qmk.fm
Then go into the root directory of the qmk firmware (whereever you just cloned it to) and clone this repo into /keyboards/crkbd/keymaps/noinfo
:
git clone git@github.com:noinfo/QMK_corne.git /keyboards/crkbd/keymaps/noinfo
Building
In the root directory of the qmk firmware do:
qmk compile -kb crkbd/r2g -km noinfo
Flashing
In the root directory of the qmk firmware do:
qmk flash -kb crkbd/r2g -km noinfo
...or use the QMK toolbox and the firmware file from the root directory
Keymap JSON
qmk c2json -kb crkbd/r2g -km noinfo -o keymap.json keymap.c
ATTENTION Remove the JSON from the folder before compiling the firmware. Can be safely used for printing purposes.
Layout-Resources
In the folder layout-editor-resources
you can find resources from and for keyboard-layout-editor for a single graphic containing info on all layers (work in progress).