Web flasher is available @ https://emfcamp.github.io/badge-2024-software/
To build with a consistent toolchain, use docker.
Pull the firmware build image:
docker pull matthewwilkes/esp_idf:5.2.1
(Or build it yourself, if you prefer):
docker build . -t matthewwilkes/esp_idf:5.2.1
Initialize submodules:
git submodule update --init --recursive
To make the docker container with the right version of the ESP-IDF for the latest micropython.
Before you build the first time, apply any patches to vendored content:
./scripts/firstTime.sh
Then to build the images run:
docker run -it --env "TARGET=esp32s3" -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:5.2.1
Alternatively, to flash a badge: put the badge into bootloader by disconnecting the usb in, press and hold bat and boop buttons for 20 seconds then reconnect the usb in and run:
docker run -it --device /dev/ttyACM0:/dev/ttyUSB0 --env "TARGET=esp32s3" -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:5.2.1 deploy
where /dev/ttyACM0 is the device's endpoint. This value is correct on Linux.
Please install pre-commit to ensure ruff is run:
python3 -m pip install pre-commit
pre-commit install