oled js

What is this?

This repo is a library compatible with Rick Waldron's johnny-five project. It adds support for I2C/SPI compatible monochrome OLED screens. Works with 128 x 32, 128 x 64 and 96 x 16 sized screens, of the SSD1306 OLED/PLED Controller (read the datasheet here).

Got a MicroView from GeekAmmo/SparkFun? That'll work too.

Interested in the nerdy bits going on behind the scenes? Read my blog post about how OLED screens work!

OLED screens are really cool - now you can control them with JavaScript!

Install

If you haven't already, install NodeJS and the Arduino IDE to your computer.

npm install oled-js
Upload the Standard Firmata sketch (prepackaged with the Arduino IDE) to your Arduino of choice. This can be found under File > Examples > Firmata > StandardFirmata [ further help]

I2C screens

Hook up I2C compatible oled to the Arduino. If using an Arduino Uno, pins are as follows:

SDL to pin A4
SCL to pin A5
RESET to pin 4

Fritzing diagram is here. Look up the correct pins if using a board other than Arduino.

If you'd like to run the demo:

git clone this repo (get latest release instead of master branch)
npm install
Replace width, height, and other values in the options with your own in tests/demoTime.js
node tests/demoTime.js

I2C example

const five = require('johnny-five');
const Oled = require('oled-js');

const board = new five.Board();

board.on('ready', () => {
  console.log('Connected to Arduino, ready.');

  const opts = {
    width: 128,
    height: 64,
    address: 0x3D
  };

  const oled = new Oled(board, five, opts);
  // do cool oled things here
});

Wait, how do I find out the I2C address of my OLED screen?

Yeah this sounds like a nightmare, but it's pretty simple! Before uploading standard firmata to your Arduino, upload the following sketch from the Arduino Playground called 'I2C scanner'. Does what it says on the box. Open up your serial monitor, and you'll see your device address pop up there. Make a note of it, then re-upload standard firmata to your Arduino again.

SPI screens

IMPORTANT NOTE: Using SPI will make your screen update and draw VERY slow. Manual hardware SPI over USB is the only way currently to do this within Johnny-Five, which is not optimized for the normal speed you can expect from SPI in general. Sorry about that. Here is a video I took to show this.

Hook up SPI compatible oled to the Arduino. If using an Arduino Uno, pins are as follows:

Data/MOSI to pin D9
CLK to pin D10
D/C to pin D11
RST to pin D13
CS/SS to pin 12 (you can change this one if you really want to)

Fritzing diagram coming soon.

SPI example

const five = require('johnny-five');
const Oled = require('oled-js');

const board = new five.Board();

board.on('ready', () => {
  console.log('Connected to Arduino, ready.');

  const opts = {
    width: 128,
    height: 64,
    secondaryPin: 12
  };

  const oled = new Oled(board, five, opts);
  // do cool oled things here
});

MicroView

MicroView uses SPI, so please see the note about drawing speed in the SPI section above.

This one is pretty simple - use the USB programmer that should have come with your MicroView. Insert the MicroView's header pins into the slots on the USB programmer. Plug it in to your nearest USB port, and you're done! No pin mappings, no sweat.

Microview example

const five = require('johnny-five');
const Oled = require('oled-js');

const board = new five.Board();

board.on('ready', () => {
  console.log('Connected to Arduino, ready.');

  const opts = {
    width: 64,
    height: 48,
    microview: true
  };

  const oled = new Oled(board, five, opts);
  // do cool oled things here
});

Available methods

clearDisplay

Fills the buffer with 'off' pixels (0x00). Optional bool argument specifies whether screen updates immediately with result. Default is true.

Usage:

oled.clearDisplay();

dimDisplay

Lowers the contrast on the display. This method takes one argument, a boolean. True for dimming, false to restore normal contrast.

Usage:

oled.dimDisplay(true|false);

invertDisplay

Inverts the pixels on the display. Black becomes white, white becomes black. This method takes one argument, a boolean. True for inverted state, false to restore normal pixel colors.

Usage:

oled.invertDisplay(true|false);

turnOffDisplay

Turns the display off.

Usage:

oled.turnOffDisplay();

turnOnDisplay

Turns the display on.

Usage:

oled.turnOnDisplay();

drawPixel

Draws a pixel at a specified position on the display. This method takes one argument: a multi-dimensional array containing either one or more sets of pixels.

Each pixel needs an x position, a y position, and a color. Colors can be specified as either 0 for 'off' or black, and 1 or 255 for 'on' or white.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Usage:

// draws 4 white pixels total
// format: [x, y, color]
oled.drawPixel([
	[128, 1, 1],
	[128, 32, 1],
	[128, 16, 1],
	[64, 16, 1]
]);

drawLine

Draws a one pixel wide line.

Arguments:

int x0, y0 - start location of line
int x1, y1 - end location of line
int color - can be specified as either 0 for 'off' or black, and 1 or 255 for 'on' or white.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Usage:

// args: (x0, y0, x1, y1, color)
oled.drawLine(1, 1, 128, 32, 1);

fillRect

Draws a filled rectangle.

Arguments:

int x0, y0 - top left corner of rectangle
int width, height - width and height of rectangle in pixels
int color - can be specified as either 0 for 'off' or black, and 1 or 255 for 'on' or white.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Usage:

// args: (x0, y0, width, height, color)
oled.fillRect(1, 1, 10, 20, 1);

drawRect

Draws an empty rectangle.

Arguments:

int x0, y0 - top left corner of rectangle
int width, height - width and height of rectangle in pixels
int color - can be specified as either 0 for 'off' or black, and 1 or 255 for 'on' or white.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Usage:

// args: (x0, y0, width, height, color)
oled.drawRect(1, 1, 10, 20, 1);

drawCircle

Draws an empty circle.

Arguments:

int x - x of circle's center
int y - y of circle's center
int r - radius of circle
int color - can be specified as either 0 for 'off' or black, and 1 or 255 for 'on' or white.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Usage:

// args: (x, y, r, color)
oled.drawCircle(30, 10, 5, 1);

drawBitmap

Draws a bitmap using raw pixel data returned from an image parser. The image sourced must be monochrome, and indexed to only 2 colors. Resize the bitmap to your screen dimensions first. Using an image editor or ImageMagick might be required.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Tip: use a NodeJS image parser to get the pixel data, such as pngparse. A demonstration of using this is below.

Example usage:

npm install pngparse

const pngparse = require('pngparse');

pngparse.parseFile('indexed_file.png', (err, image) => {
	oled.drawBitmap(image.data);
});

This method is provided as a primitive convenience. A better way to display images is to use NodeJS package png-to-lcd instead. It's just as easy to use as drawBitmap, but is compatible with all image depths (lazy is good!). It will also auto-dither if you choose. You should still resize your image to your screen dimensions. This alternative method is covered below:

npm install png-to-lcd

const pngtolcd = require('png-to-lcd');

pngtolcd('nyan-cat.png', true, (err, bitmap) => {
  oled.buffer = bitmap;
  oled.update();
});

startScroll

Scrolls the current display either left or right. Arguments:

string direction - direction of scrolling. 'left' or 'right'
int start - starting row of scrolling area
int stop - end row of scrolling area

Usage:

// args: (direction, start, stop)
oled.startScroll('left', 0, 15); // this will scroll an entire 128 x 32 screen

stopScroll

Stops all current scrolling behaviour.

Usage:

oled.stopScroll();

setCursor

Sets the x and y position of 'cursor', when about to write text. This effectively helps tell the display where to start typing when writeString() method is called.

Call setCursor just before writeString().

Usage:

// sets cursor to x = 1, y = 1
oled.setCursor(1, 1);

writeString

Writes a string of text to the display. Call setCursor() just before, if you need to set starting text position.

Arguments:

obj font - font object in JSON format (see note below on sourcing a font)
int size - font size, as multiplier. Eg. 2 would double size, 3 would triple etc.
string text - the actual text you want to show on the display.
int color - color of text. Can be specified as either 0 for 'off' or black, and 1 or 255 for 'on' or white.
bool wrapping - true applies word wrapping at the screen limit, false for no wrapping. If a long string without spaces is supplied as the text, just letter wrapping will apply instead.
int linespacing - amount of spacing between lines of text on the screen. Negative numbers are also ok.

Optional bool as last argument specifies whether screen updates immediately with result. Default is true.

Before all of this text can happen, you need to load a font buffer for use. A good font to start with is NodeJS package oled-font-5x7. Want more options? Try rolling your own font module to require instead, using the oled-js font foundry!

Usage:

npm install oled-font-5x7

const font = require('oled-font-5x7');

// sets cursor to x = 1, y = 1
oled.setCursor(1, 1);
oled.writeString(font, 1, 'Cats and dogs are really cool animals, you know.', 1, true, 2);

update

Sends the entire buffer in its current state to the oled display, effectively syncing the two. This method generally does not need to be called, unless you're messing around with the framebuffer manually before you're ready to sync with the display. It's also needed if you're choosing not to draw on the screen immediately with the built in methods.

Usage:

oled.update();

Future

better documentation
16-bit color oled support

noopkat/oled-js

oled js

What is this?

Install

I2C screens

I2C example

Wait, how do I find out the I2C address of my OLED screen?

SPI screens

SPI example

MicroView

Microview example

Available methods

clearDisplay

dimDisplay

invertDisplay

turnOffDisplay

turnOnDisplay

drawPixel

drawLine

fillRect

drawRect

drawCircle

drawBitmap

startScroll

stopScroll

setCursor

writeString

update

Future