norseto/terraform-provider-kops

Brings kOps into terraform in a fully managed way

terraform-provider-kops

terraform-provider-kops brings kOps into terraform in a fully managed way, enabling idempotency through direct integration with the kOps api:

• No local_exec
• No yaml templating
• No CLI invocations

... just pure go code.

Currently using kOps v1.29.2 tested with Terraform 1.5.x and higher.

NOTES

The provider has been tested only with:

• AWS, using Calico and Cilium networking.
• GCP, using gcp networking mode.

If you use it with another cloud or networking provider, please let us know so that we can help troubleshooting if necessary and update the docs.

Why use it

kOps is an amazing tool but it can be challenging to integrate in an IAC (infrastructure as code) stack.

Typical solutions usually involve running kOps CLI in shell scripts or generating kOps templates manually and force syncing them with the kOps store.

In most cases, getting something idempotent is difficult because you need to somewhat keep the state of the cluster and are responsible for deleting obsolete instange groups for example.

This is where terraform shines in, state management. This provider takes care of creating, updating and deleting instance groups as they evolve over time.

Even if kOps provides kops update cluster --target terraform to create the terraform configuration for a kOps cluster, it is still necessary to run kops rolling-update cluster to recycle instance groups when something changes in the cluster. With this provider, this is all taken care of and you should never need to invoke kOps manually.

How does it work

The provider declares resources to declare the state of the cluster:

• kops_cluster defines the desired state of a cluster
• kops_instance_group defines the desired state of a cluster instance group

The provider also declares data sources to fetch the state of the cluster and use it in your terraform code:

• kops_cluster fetches the current state of a cluster
• kops_instance_group fetches the current state of a cluster instance group
• kops_cluster_status fetches the current status of a cluster
• kops_kube_config fetches the kube config infos of a cluster

Finally, a special resource takes care of the cluster lifecyle:

• kops_cluster_updater manages cluster updates and/or rolling updates

Provider configuration holds cloud provider authentication settings, currently only AWS is supported.

Docs

The full documentation is available in the docs folder or on the terraform registry provider page.

Installing the provider

To install the provider, add it in the terraform required_providers set.

terraform {
  required_providers {
    kops = {
      source  = "terraform-kops/kops"
    }
  }
}

Building the provider

To build the provider, clone this repository and run the following command:

make all

If you want to install the built provider after building it, run the following command instead (working on linux and macos):

make install

Using the provider

To use the provider you will need to register it in your terraform code:

terraform {
  required_providers {
    kops = {
      source   = "github/terraform-kops/kops"
      versions = ["0.0.1"]
    }
  }
}

provider "kops" {
  state_store = "s3://cluster.example.com"
  // optionally set up your cloud provider access config
  aws {
    profile = "example_profile"
  }
}

Example usage

locals {
  masterType  = "t3.medium"
  nodeType    = "t3.medium"
  clusterName = "cluster.example.com"
  dnsZone     = "example.com"
  vpcId       = "vpc-id"
  privateSubnets = [
    { subnetId = "private-subnet-0", zone = "zone-0" },
    { subnetId = "private-subnet-1", zone = "zone-1" },
    { subnetId = "private-subnet-2", zone = "zone-2" }
  ]
  utilitySubnets = [
    { subnetId = "utility-subnet-0", zone = "zone-0" },
    { subnetId = "utility-subnet-1", zone = "zone-1" },
    { subnetId = "utility-subnet-2", zone = "zone-2" }
  ]
}

resource "kops_cluster" "cluster" {
  name               = local.clusterName
  admin_ssh_key      = file("${path.module}/../dummy_ssh.pub")
  kubernetes_version = "stable"
  dns_zone           = local.dnsZone
  network_id         = local.vpcId

  cloud_provider {
    aws {}
  }

  iam {
    allow_container_registry = true
  }

  networking {
    calico {}
  }

  topology {
    masters = "private"
    nodes   = "private"
    dns {
      type = "Private"
    }
  }

  # private subnets
  subnet {
    name        = "private-0"
    type        = "Private"
    provider_id = local.privateSubnets[0].subnetId
    zone        = local.privateSubnets[0].zone
  }
  subnet {
    name        = "private-1"
    type        = "Private"
    provider_id = local.privateSubnets[1].subnetId
    zone        = local.privateSubnets[1].zone
  }
  subnet {
    name        = "private-2"
    type        = "Private"
    provider_id = local.privateSubnets[2].subnetId
    zone        = local.privateSubnets[2].zone
  }
  subnet {
    name        = "utility-0"
    type        = "Utility"
    provider_id = local.utilitySubnets[0].subnetId
    zone        = local.utilitySubnets[0].zone
  }
  subnet {
    name        = "utility-1"
    type        = "Utility"
    provider_id = local.utilitySubnets[1].subnetId
    zone        = local.utilitySubnets[1].zone
  }
  subnet {
    name        = "utility-2"
    type        = "Utility"
    provider_id = local.utilitySubnets[2].subnetId
    zone        = local.utilitySubnets[2].zone
  }

  # etcd clusters
  etcd_cluster {
    name = "main"
    member {
      name           = "master-0"
      instance_group = "master-0"
    }
    member {
      name           = "master-1"
      instance_group = "master-1"
    }
    member {
      name           = "master-2"
      instance_group = "master-2"
    }
  }
  etcd_cluster {
    name = "events"
    member {
      name           = "master-0"
      instance_group = "master-0"
    }
    member {
      name           = "master-1"
      instance_group = "master-1"
    }
    member {
      name           = "master-2"
      instance_group = "master-2"
    }
  }
}

resource "kops_instance_group" "master-0" {
  cluster_name = kops_cluster.cluster.id
  name         = "master-0"
  role         = "Master"
  min_size     = 1
  max_size     = 1
  machine_type = local.masterType
  subnets      = ["private-0"]
}

resource "kops_instance_group" "master-1" {
  cluster_name = kops_cluster.cluster.id
  name         = "master-1"
  role         = "Master"
  min_size     = 1
  max_size     = 1
  machine_type = local.masterType
  subnets      = ["private-1"]
}

resource "kops_instance_group" "master-2" {
  cluster_name = kops_cluster.cluster.id
  name         = "master-2"
  role         = "Master"
  min_size     = 1
  max_size     = 1
  machine_type = local.masterType
  subnets      = ["private-2"]
}

resource "kops_instance_group" "node-0" {
  cluster_name = kops_cluster.cluster.id
  name         = "node-0"
  role         = "Node"
  min_size     = 1
  max_size     = 2
  machine_type = local.nodeType
  subnets      = ["private-0"]
}

resource "kops_instance_group" "node-1" {
  cluster_name = kops_cluster.cluster.id
  name         = "node-1"
  role         = "Node"
  min_size     = 1
  max_size     = 2
  machine_type = local.nodeType
  subnets      = ["private-1"]
}

resource "kops_instance_group" "node-2" {
  cluster_name = kops_cluster.cluster.id
  name         = "node-2"
  role         = "Node"
  min_size     = 1
  max_size     = 2
  machine_type = local.nodeType
  subnets      = ["private-2"]
}

resource "kops_cluster_updater" "updater" {
  cluster_name = kops_cluster.cluster.id

  keepers = {
    cluster  = kops_cluster.cluster.revision
    master-0 = kops_instance_group.master-0.revision
    master-1 = kops_instance_group.master-1.revision
    master-2 = kops_instance_group.master-2.revision
    node-0   = kops_instance_group.node-0.revision
    node-1   = kops_instance_group.node-1.revision
    node-2   = kops_instance_group.node-2.revision
  }
}

More examples are available in the /examples folder:

• Basic example
• Aws profile example
• Aws assume role
• Bastion example

Importing an existing cluster

You can import an existing cluster by creating a kops_cluster configuration and running the terraform import command:

1. Create a terraform configuration:

   provider "kops" {
     state_store = "s3://cluster.example.com"
   }
   
   resource "kops_cluster" "cluster" {
     name        = "cluster.example.com"
   
     // ....
   }

2. Run terraform import:

   terraform import kops_cluster.cluster cluster.example.com

Importing an existing instance group

You can import an existing cluster by creating a kops_instance_group configuration and running the terraform import command:

1. Create a terraform configuration:

   provider "kops" {
     state_store = "s3://cluster.example.com"
   }
   
   resource "kops_instance_group" "ig-0" {
     cluster_name = "cluster.example.com"
     name         = "ig-0"
   
     // ....
   }

2. Run terraform import:

   terraform import kops_instance_group.ig-0 cluster.example.com/ig-0

NOTE: the id of the instance group to be imported must be given in the cluster name/instance group name format.

Getting kubeconfig file

To retrieve the kubeconfig file for the cluster, run the following command:

kops export kubecfg --admin --name cluster.example.com --state s3://cluster.example.com