/*
Version: V1.4
Author: Vincent
Create Date: 2022/7/13
Note:
2022/12/29 V1.4: Change wiki link
2022/10/10 V1.3: Add Touch Keyboard demo and Back Light demo.
2022/8/19 V1.2: Add hardware file.
2022/8/18 V1.1: Add two demo.
*/
[toc]
Product Link ：ESP32-S3 SPI TFT with Touch 3.5'' ILI9488
Wiki Link : ESP32-S3 SPI 3.5" TFT with Touch
The 3.5" 320x480 TFT LCD driver is ILI9488, it uses SPI line for communication with ESP32-S3. You can freely use some of GPIO, to connect the ESP32-S3 display with sensors/ actuators, suitable for IoT applications.
- Wi-Fi (2.4 GHz band)
- Bluetooth Low Energy
- Dual high performance Xtensa® 32-bit LX7 CPU cores
- Ultra Low Power co-processor running either RISC-V or FSM core
- Multiple peripherals
- Built-in security hardware
- USB OTG interface
- USB Serial/JTAG Controller
- Arduino Compatible: You can play it with Arduino IDE
- LCD 3.5 inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) for mobile-phone or handy electrical equipment
- LCD Driver: ILI9488(SPI)
- LCD Resolution: 320*480
- FT6236 Series ICs are single-chip capacitive touch panel controller IC with a built-in 16 bit enhanced Micro-controller unit (MCU)
- Power supply: 5V, Type-C USB
- Micro SD card slot on the board
- Dual USB Type-C: one for native USB and one for USB-to-UART
- Board size: 66mm * 85mm
- Install board : ESP32 .
- Install library : LovyanGFX library.
- Use type-c use cable connect USB-TTL to PC.
- Upload codes, select "ESP32-S3 DEV Module" and "UART0"
A simple test procedure. Touch the black area in the middle of the screen, and the screen starts showing solid colors in turn. Finally, an SD card image is displayed.
The BMP image of the SD card is displayed.
ESP32 Touch_Indoor Environment Expansion
Test air temperature, humidity, and TVOC values with extension plate.
Added an inherited three custom keyboard keyboard Demo, including text input + key combination, numeric keypad, arrow keys + space.
Periodically adjust the brightness of the backlight