DBD::Pg is Copyright (C) 1994-2024, Greg Sabino Mullane DBD::Pg -- the DBI PostgreSQL interface for Perl DESCRIPTION: ------------ This is version 3.18.0 of DBD::Pg, the Perl interface to Postgres using DBI. The web site for this interface, and the latest version, can be found at: http://search.cpan.org/dist/DBD-Pg/ The mailing list is at: http://www.nntp.perl.org/group/perl.dbd.pg/ Subscribe with an email to dbd-pg-subscribe@perl.org The development of DBD::Pg can be tracked at: git://github.com/bucardo/dbdpg.git For information about PostgreSQL, visit: http://www.postgresql.org/ For information on what has changed for each version, see the Changes files. REQUIREMENTS: ------------- build, test, and install Perl 5 (at least 5.8.1) build, test, and install the DBI module (at least 1.614) build, test, and install PostgreSQL (at least 8.0) build, test, and install Test::Simple (at least 0.47) DBD::Pg needs to know where to find the libpq libraries: this is usually done by checking the output of the pg_config executable. If pg_config is not available, then you may need to install the development package for PostgreSQL. To do this on Debian and Ubuntu, use: apt-get install libpq-dev; on RedHat, CentOS, etc. use: yum install postgresql-devel. Note that the development libraries are needed even if you already have PostgreSQL up and running. IF YOU HAVE PROBLEMS OR COMMENTS: --------------------------------- Please send any problems and comments to <dbd-pg@perl.org> Please include what OS you are using, and the version of Perl, DBI, and DBD::Pg you are using. Also tell which version of PostgreSQL DBD::Pg was compiled against, and which version you are connecting to. The easiest way to gather all of this information is to run "make test", which outputs it all early in the tests. View the archive at http://www.nntp.perl.org/group/perl.dbd.pg/ To subscribe, email dbd-pg-subscribe@perl.org To unsubscribe, email dbd-pg-unsubscribe@perl.org To get help regarding your subscription, email dbd-pg-help@perl.org You can also try the #postgresql channel on irc.libera.chat, which usually (but not always) has people who can help you with DBD::Pg. BUG REPORTS: ----------- Bug reports are welcome at: https://github.com/bucardo/dbdpg/issues PATCHES: -------- Patches are always welcome: the best way is to create a Pull Request at https://github.com/bucardo/dbdpg INSTALLATION: ------------- Before installing, please use the "cpansign -v" program to cryptographically verify that your copy of DBD::Pg is complete and valid. The program "cpansign" is part of Module::Signature, available from CPAN. By default Makefile.PL uses App::Info to find the location of the PostgreSQL library and include directories. However, if you want to control it yourself, define the environment variables POSTGRES_INCLUDE and POSTGRES_LIB, or define just POSTGRES_HOME. Note that if you have compiled PostgreSQL with SSL support, you must define the POSTGRES_LIB environment variable and add "-lssl" and "-lcrypto" to it, like this: export POSTGRES_LIB="/usr/local/pgsql/lib -lssl -lcrypto" The usual steps to install DBD::Pg: 1. perl Makefile.PL 2. make 3. make test 4. make install Do steps 1 to 2 as a normal user, not as root! If the script cannot find the pg_config information itself, it will ask you for the path to it. Enter the complete path to the pg_config file here, including the name of the file itself. TESTING: -------- The tests rely on being able to connect to a valid Postgres database. The easiest way to ensure this is to set the following environment variables: DBI_DSN=dbi:Pg:dbname=<database> DBI_USER=<username> DBI_PASS=<password> If you are running on a non-standard port, you must set PGPORT or add the port to the DBI_DSN variable like this: DBI_DSN='dbi:Pg:dbname=<database>;port=<port#>' Put double quotes around the dbname if it has a semicolon or a space inside of it: DBI_DSN='dbi:Pg:dbname="<data;base>"' If no valid connection is found, the tests will use the "initdb" program to try and create a Postgres database cluster to test with. The first available port starting at 5440 will be used. If your directory path is long, Postgres may fail to start as there is a maximum length to socket directory paths. If this happens, please set the environment variable DBDPG_TEMPDIR to something short, such as "/tmp". You can increase the verbosity of the tests by setting the environment variable TEST_VERBOSE. You can also enable tracing within the tests themselves by setting DBD_TRACE to whatever trace level you want. Be aware that setting the trace level can result in extremely verbose output. When reporting test failures, please use TEST_VERBOSE=1, but do *not* set DBD_TRACE unless requested, and send only the relevant sections. Please consider installing CPAN::Reporter so that your tests are automatically gathered and reported, which helps the development of DBD::Pg. TROUBLESHOOTING: ---------------- * Placeholder issues If you find that some of your queries containing placeholders are no longer working, this may because DBD::Pg now uses the native PostgreSQL placeholders on the server itself whenever possible. Previously, DBD::Pg did a simple emulation of placeholders, so the rules were not as strict. You should either rewrite your queries to make them legal SQL syntax for PostgreSQL, or turn off server-side prepares. To change your queries, make sure that the type of each placeholder can be determined by the PostgreSQL parser. So instead of: SELECT ? use something like: SELECT ?::int To turn off server-side prepares completely (with a loss of some performance and features), do this at the top of your scripts: $dbh->{pg_server_prepare} = 0; This can also be set for individual queries at the statement handle level: see the documentation section on "Placeholders" for more details. * PostgreSQL library issues: DBD::Pg uses the libpq library that comes with Postgres. If the shared libpq library is not available, DBD::Pg will error with a message that usually mentions a file names libpq.so, like this: Can't load './blib/arch/auto/DBD/Pg/Pg.so' for module DBD::Pg: libpq.so.5: cannot open shared object file: No such file or directory at .../DynaLoader.pm line 230. This means that the libraries are not installed in a place where the system can find them when it tries to load the Pg.so file. On some systems, you can run /sbin/ldconfig -v to see a list of shared modules, or just search the system for the file with "locate libpq.so". If it exists but is not being loaded, you may need to add the directory it is in to /etc/ld.so.conf file and run the ldconfig command. Otherwise, you may need to add the path to the environment variable LD_LIBRARY_PATH. If you get an error message like: perl: error while loading shared libraries: /usr/lib/perl5/site_perl/5.6.1/i386-linux/auto/DBD/Pg/Pg.so: undefined symbol: PQconnectdb when you call DBI->connect, then your libpq.so was probably not seen at build-time. This should have caused 'make test' to fail; did you really run it and look at the output? * Mac installation issues Modern Mac software has a feature called Software Integrity Protection that strips out all LD_* and DYLD_* environment variables when a program starts, which means DBD::Pg will no compile. One solution is to use the install_name_tool program to modify the relative paths to absolute ones. As an example: sudo install_name_tool -change \ libpq.5.dylib /Library/PostgreSQL/11/lib/libpq.5.dylib \ ~/perl5/lib/perl5/darwin-thread-multi-2level/auto/DBD/Pg/Pg.bundle * Perl issues: Some Linux distributions have incomplete perl installations. If you have compile errors like "XS_VERSION_BOOTCHECK undeclared", do: find .../lib/perl5 -name XSUB.h -print If this file is not present, you need to recompile and re-install perl. If you get a message about "use of uninitialized value in -d" when doing a "make install_vendor", you can work around this by adding a dummy value to the INSTALLVENDORBIN environment variable: make install_vendor INSTALLVENDORBIN=/tmp (thanks to Peter Eisentraut <peter_e at gmx.net>) * Strawberry Perl issues: You'll need to create a .a library from the .dll before running the Makefile.PL, by running pexports and dlltool as shown below, within the C:\Program Files\PostgreSQL\8.3\bin directory: C:\Windows\> C:\MinGW\bin\pexports libpq.dll > libpq.def C:\Windows\> C:\MinGW\bin\dlltool -dllname libpq.dll --def libpq.def --output-lib "C:\Program Files\PostgreSQL\12\lib\libpq.a" pexports and dlltool are included with MinGW - Minimalist Gnu for Windows, found here: https://osdn.net/projects/mingw/releases/ Once you have installed MinGW you can install pexports and dlltool as follows: C:\Windows\> C:\MinGW\bin\mingw-get.exe install pexports C:\Windows\> C:\MinGW\bin\mingw-get.exe install dlltool Then you'll need to set the required environment: set PATH=C:\PROGRA~1\PostgreSQL\8.3\bin;%PATH% set DBI_DSN=dbi:Pg:dbname=testdb set DBI_USER=*PostgreSQL username* set DBI_PASS=*PostgreSQL password* set POSTGRES_HOME=C:/PROGRA~1/PostgreSQL/8.3 set POSTGRES_INCLUDE=C:/PROGRA~1/PostgreSQL/8.3/include set POSTGRES_LIB=C:/PROGRA~1/PostgreSQL/8.3/lib Note that the username and password are the ones for PostgreSQL, NOT the ones for the Windows account that the PostgreSQL installer creates to run the service safely. (You may wish to set these variables on the system level, by going to Control Panel > System > Advanced tab > Environment Variables button and adding the environment variables there.) Now the Makefile.PL can be ran: perl Makefile.PL dmake dmake test dmake install * SGI issues: If you get segmentation faults, make sure you are using the malloc which comes with perl when compiling perl (the default is not to). (thanks to "David R. Noble" <drnoble at engsci.sandia.gov>) * HP issues: If you get error messages like: can't open shared library: .../lib/libpq.sl No such file or directory when running the test script, try to replace the 'shared' option in the LDDFLAGS with 'archive'. (thanks to Dan Lauterbach <danla at dimensional.com>) * FreeBSD issues: If you get during "make test" the error message: 'DBD driver has not implemented the AutoCommit attribute' recompile the DBI module and the DBD-Pg module and disable optimization. This error message is due to the broken optimization in gcc-2.7.2.1. If you get compiler errors like: In function `XS_DBD__Pg__dr_discon_all_' `sv_yes' undeclared (first use in this function) it may be because there is a 'patchlevel.h' file from another package (such as 'hdf') in your POSTGRES_INCLUDE dir. The presence of this file prevents the compiler from finding the perl include file 'mach/CORE/patchlevel.h'. Do 'pg_config --includedir' to identify the POSTGRES_INCLUDE dir. Rename patchlevel.h whilst you build DBD::Pg. * Sun issues: If you get compile errors like: /usr/include/string.h:57: parse error before `]' then you need to remove from pgsql/include/libpq-fe.h the define for strerror, which clashes with the definition in the standard include file. * Win32 issues: For installation, please see the README.win32 file. Running DBD-Pg scripts on Win32 needs some configuration work on the server side: o add a postgres user with the same name as the NT-User (e.g. Administrator) o make sure, that your pg_hba.conf on the server is configured, such that a connection from another host will be accepted * OS X issues: You may need to add "-lssl" and "-lcrypto" to your LIB variable before compiling. (thanks to <rob at cabrion dot com>) If having problems compiling, try running: env -i command This trick stops 'command' from inheriting environment variables from the shell process, which more often than not fixes up such weird build errors without having to do anything else in particular. (thanks to David Landgren <david at landgren dot net>) * SCO issues: If the 'make test' gives an error about a symbol not being found, you can correct the problem by manually running ld after the 'make' command: LD_RUN_PATH="/usr/local/pgsql/lib" ld -G -L/usr/local/lib Pg.o \ dbdimp.o -o blib/arch/auto/DBD/Pg/Pg.so -L/usr/local/pgsql/lib -lpq \ -L/opt/K/SKUNK2000/Gcc/2.95.2pl1/usr/local/lib/gcc-lib/i386-pc-sco3.2v5.0.5/2.95.2/ \ -lgcc Once this is done, 'make test' succeeds properly. (thanks to <jmore at remote-print.com>) COPYRIGHT: ---------- Copyright (c) 2002-2024 Greg Sabino Mullane and others: see the Changes file Portions Copyright (c) 2002 Jeffrey W. Baker Portions Copyright (c) 1997-2001 Edmund Mergl Portions Copyright (c) 1994-1997 Tim Bunce LICENSE INFORMATION: -------------------- This module (DBD::Pg) is free software; you can redistribute it and/or modify it under the same terms as Perl 5.10.0. For more details, see the full text of the licenses in the directory LICENSES.