This repository is a fork from the original Raspberry Pi UPS HAT V3 repository with the focus of making it compatible with python3.
Owners email contact: info@geekworm.com
This project has been tested on a Raspberry Pi 4 (Buster) system.
git clone https://github.com/geekworm-com/ups3.git
cd ups3
chmod +x *.sh *.py
sudo ./install.sh
┌────────────────────┤ UPS V3 Setting ├────────────────────┐
│ Select the appropriate options: │
│ │
│ 1 UPS GPIO [ 18 ] │
│ 2 LED Brightness [ 10% ] │
│ 3 Poweoff power [ <5% ] │
│ 4 Auto run script [ enabled ] │
│ 5 Safe shutdown [ enabled ] │
│ 6 Apply Settings │
│ 7 Remove │
│ 8 Exit │
│ │
│ │
│ │
│ │
│ <Ok> │
│ │
└──────────────────────────────────────────────────────────┘
Description of each option：
After you select an option, you must use option 6 to make it effective！！
1 UPS GPIO [ 18 ] :
Ups3 uses GPIO18 to manage LED lights by default, When you need to use GPIO 18 yourself, through this option, you can modify the GPIO PIN
2 LED Brightness [ 10% ]:
You can change the brightness of LED via this option, you need to reboot raspberry pi to take effect.
3 Poweoff power [ <5% ]：
This is a useful function, you can set the percentage of power to tell UPS3 to shut down automatically
4 Autorun [ enabled ] :
If you want this service to run automatically every time the Raspberry Pi restarts, please remember to enable it.
5 Safe shutdown [ enabled ] :
Please refer to here: https://wiki.geekworm.com/UPS3_power_off_guide
6 Apply Settings:
After you select an option, you must use this option to make it effective;
7 Remove:
Remove or uninstall this script / service;
8 Exit:
Exit this menu;
View Status:
sudo python status.py or sudo python status.py -t
View logs:
cat /var/log/smartups.log