UserSys

Configurable user management system for Laravel 5.

Introduction
Installation
Updating User Eloquent Models
Routes
Requests
Events
Listeners
Migrations
Assets
Translations
Views
Configuration
Copyright and License

NOTE The package is built keeping Laravel 5 in mind and has not been tested for Laravel 4 or below.

Introduction: Why use UserSys?

Laravel comes with a user system out of the box but it is not so much configurable as one might expect. UserSys is the package for Laravel 5 developers who want to get a proper hold over the user system mechanism.

You can configure or customize, major features of the user system just my making minor edits or by setting appropriate values to the flags in the configuration file.

Views are given out of the box and of course you can replace them with your own, just by defining them in the config file.

Installation

To install UserSys as a Composer package to be used with Laravel 5, simply run: composer require qumonto/usersys

Next, update config/app.php by registering the service provider of UserSys package.

'providers' => [
    // ...
    Qumonto\UserSys\UserSysServiceProvider::class,
];

From the command line, run php artisan vendor:publish to publish the default configurations, views, migrations, translations, events, listeners, assets and requests. If don't want to publish all the files then you may follow the command with appropriate tags.

Example: php artisan vendor:publish -tag="config" can be used to publish only configuration file.

NOTE For details about the tags for each category of files visit the corresponding section in the README.md

Updating `User` Eloquent Model

The User model's fillable array must be updated with a value verification_token to avoid mass assignment exception while registering a new user record into the database.

Routes

All the routes required for user system are added out of the box and the list of those routes are given below:

Method	URI	Action	Middleware
POST	login	Qumonto\UserSys\Http\Controllers\AuthController@postLogin	guest
GET	login	Qumonto\UserSys\Http\Controllers\AuthController@getLogin	guest
GET	logout	Qumonto\UserSys\Http\Controllers\AuthController@getLogout
POST	register	Qumonto\UserSys\Http\Controllers\AuthController@postRegister	guest
GET	register	Qumonto\UserSys\Http\Controllers\AuthController@getRegister	guest
POST	reset	App\Http\Controllers\Auth\PasswordController@postReset	guest
POST	reset/email	App\Http\Controllers\Auth\PasswordController@postEmail	guest
GET	reset/email	App\Http\Controllers\Auth\PasswordController@getEmail	guest
GET	reset/{token}	App\Http\Controllers\Auth\PasswordController@getReset	guest
GET	verify/{verify_token}	Qumonto\UserSys\Http\Controllers\AuthController@getVerify	guest

NOTE You cannot overide the routes, but in futher releases routing will be made flexible.

Requests

UserLoginRequest validates the login requests by the users. By default, the rules are defined in the rules() method of the UserLoginRequest class which says, an email/username is required and must be less than '255' characters. And the password is also required and must be at least '5' characters long.
UserRegisterRequest validates the registration requests by the user. By default, the username/email field is marked required with less than '255' characters and should be a unique value. The password must be atleast '5' characters and should be confirmed.

Adding a requests tag to vendor:publish will publish the requests classes. php artisan vendor:publish --tag="requests"

NOTE You may modify the rules according to the needs of your project. Request files are located in app/Http/Requests/ directory.

Events

An event will be fired when new user is registered. The event class is named UserRegistered and extends App\Events\Event.

To push the UserRegistered event class to the app/Events directory, use events tag. php artisan vendor:publish --tag="events"

Listeners

We have included a listener class AccountVerificationEmail which sends an account verification email to the registered users if the email_verification flag is set to true in config/usersys.php file.

To publish the listener to app/Listeners directory, use listeners tag with the vendor:publish command. php artisan vendor:publish --tag="listeners"

Migrations

You don't really have to use the migrations provided by this package, you may skip publishing migrations by adding/modifying 4 simple attributes to your users table.

Here are the added/modified attributes that UserSys package's users table migration provides by default:

$table->string(config('usersys.username_column_and_field'))->unique();
$table->string(config('usersys.password_column_and_field'), 60);
$table->string('verification_token', 50)->nullable();
$table->rememberToken();

$table->string(config('usersys.username_column_and_field'))->unique(); will hold the email or username or any other field depending on how you've set username_column_and_field flag in your config/usersys.php file.

$table->string(config('usersys.password_column_and_field'), 60); will be used to hold the encrypted password. The name of the attribute used to store user's password, depends upon how you've configured password_column_and_field flag in config/usersys.php file.

$table->string('verification_token', 50)->nullable(); will contain the email verification token that will be used in account verification process. Remember, the verification_token attribute must be at least 50 characters in length.

$table->rememberToken(); will be used to store a token for "Remember me" sessions being maintained by your application. Hence you must verify that your users table contains the following column if you wish to provide "Remember me" functionality.

Assets

The assets include bootstrap css file with the name app.css which will be referenced in the views that are provided by default in UserSys package. The assets will be published to /public/css/ directory.

To publish the assets available with this package you may run php artisan vendor:publish --tag="assets".

Translations

Translations include language files which will be used to display messages to the user for a certain activity. For example, if can edit the email_verification_subject flag to change the subject of the verification email sent to the user.

To publish the translations into app/resources/lang/en directory, you may run the following command: php artisan vendor:publish --tag="translations".

Views

Since, UserSys uses the default PasswordController class for password resets, views are handled differently. The views password.blade.php (forgot password view) and reset.blade.php (account reset view) will be pushed to resources/views/auth/ directory by running php artisan vendor:publish --tag="password-views".

Other views such as login.blade.php, register.blade.php and verify.blade.php can be configured in the config/usersys.php file.

Configuration

Configuration flags	Defaults	Examples
`app_name`	'UserSys'	`'app_name' => 'UserSys',`
`redirect_after_fail`	'login'	`'redirect_after_fail' => '/',`
`redirect_after_logout`	'login'	`'redirect_after_logout' => 'login',`
`redirect_after_login`	'home'	`'redirect_after_login' => 'dashboard',`
`redirect_after_verification`	'login'	`'redirect_after_verification' => 'welcome',`
`log_user_after_registration`	`false`	`'log_user_after_registration' => true,`
`email_verification`	`true`	`'email_verification' => false,`
`username_column_and_field`	'email'	`'username_column_and_field' => 'username',`
`password_column_and_field`	'password'	`'password_column_and_field' => 'passwd',`
`login_view`	`null`	`'login_view' => 'auth.login',`
`register_view`	`null`	`'register_view' => 'auth.register',`
`email_verify_view`	`null`	`'email_verify_view' => 'emails.verify',`
`session_identifier`	'message'	`'session_identifier' => 'flash-message',`

`app_name`

Here, you may specify the name of your application and it will be visible in the navbar header in everypage.

`redirect_after_fail`

When a user attempts to login to the application and if the user fails to authenticate then the user will be redirected to the route set to this flag. Default is set to 'login' route but you are free to change that.

`redirect_after_logout`

When the user logs out of the application, the user will be redirected to the route set to this flag, after a successful logout. Default is set to 'login', can be set according to preference.

`redirect_after_login`

After a successful login into the application, the user will be redirected to the route set to this flag. The default is set to 'home' and can be changed according to the preference.

`redirect_after_verification`

Once the user completes email verification process, the user will be redirected to the route set to this flag. The default is set to 'login', but if you wish to omit the email verification feature then this field will not affect your application.

`log_user_after_registration`

By setting this flag (either true or false) you can decide whether or not to allow the user to login into their account. By default the value is set to false, hence the user requires to provide email/username and password to login after a successful registration. If the value is set to true, then after a successful registration, the user will be redirected to the path set to redirect_after_login key. Else, user will be redirected to the path set to redirect_after_logout.

`email_verification`

By setting this flag, either true or false, you can enable or disable the email verification feature. If the value is set to true, then after a successful registration, the user will have to verify the account by clicking a link sent via email. Otherwise, user will be able to login to the account without any email verification process.

NOTE Remember, the fillable array in the 'User' model must be updated with verification_token field.

`username_column_and_field`

The name field of login email at login form and the corresponding database column must be the same. Therefore, if you are using 'email_id' as the name for email field in login form, then you must also use 'email_id' as the name for the corresponding database column. Setting this flag will make sure that once it's specified the name can be accessed at both the scenarios.

`password_column_and_field`

If you're using a different identifier, other than 'password', in your database to store user's password then you may specify it here and the rest will be taken care. Futher, if you are replacing the default views then make sure you name the password field in the HTML page accordingly.

`login_view`

You may specify the view you want to use for login form. It will be overiding the default view of the package. If you want to load the default views for login page then set the field to 'null'.

If your login view is located inside /resouces/views/auth/ and named login.blade.php then you may set the flag as follows:

'login_view'	=>	'auth.login',

`register_view`

Here, you may specify the view you want to show for register form. It will be overiding the default view of the package. If you want to load the default views for register page then set the field to 'null'.

If your registration page view is located at /resources/views/auth/ and named to be register.blade.php then you can set the flag as follows:

'register_view'	=>	'auth.register',

`email_verify_view`

You may specify the view you might want to use for sending verification emails. The new value will overide the default view. If you want to load the default views for verification email then set the field to 'null'.

NOTE A verification_token variable will be injected to the email verification view which will contain the user's verification token.

`session_identifier`

The session identifier will be helpful to retrieve the session's flash messages. Hence you may specify the session identifier according to your choice and may reference to it in the views.

Example:

Setting the session identifier:

'session_identifier'	=> 'flash-message',

Flashing the data to the view:

session()->flash(config('usersys.session_identifier'), 'Your flashed message!');

Retrieving the flashed message in the view:

Session::get(config('usersys.session_identifier'));

NOTE The function config('usersys.session_identifier') will return the value set to the session_identifier flag.

Copyright and License

UserSys was written by Vijay Kumar and released under the MIT License. See the LICENSE file for details.

nvjkmr/usersys

UserSys

Introduction: Why use UserSys?

Installation

Updating User Eloquent Model

Routes

Requests

Events

Listeners

Migrations

Assets

Translations

Views

Configuration

app_name

redirect_after_fail

redirect_after_logout

redirect_after_login

redirect_after_verification

log_user_after_registration

email_verification

username_column_and_field

password_column_and_field

login_view

register_view

email_verify_view

session_identifier