o-gs/dji-firmware-tools

Issues

• error 1112

  #372 opened 6 months ago by iarkkk9
  3

• Dji mini 4 pro 1D020001 error

  #392 opened a month ago by davides15
  3

• Mini 3 Battery BQ9003 Unseal Key

  #391 opened 2 months ago by sequell
  0

• Is anyone working on an acro mode mod for FPV mode?

  #376 opened 5 months ago by factoidforrest
  1

• Gimbal calibration - DJI mini 2 SE

  #390 opened 2 months ago by fedecarpi
  1

• DJI Mini 4 Pro gimbal calibration

  #375 opened 6 months ago by estebangmi
  1

• Mini 3 pro Gimbal Calibration

  #343 opened a year ago by RudraSama
  3

• Mavic 3T Gimbal calibration is not supported

  #367 opened 7 months ago by linkuha
  3

• Lifting the software limit of 4k video camera on Mini 2 SE

  #356 opened 10 months ago by gunplar
  2

• DJI Air 3

  #388 opened 2 months ago by Ric-1000
  4

• mini 3 WM162 Main Processing Board motor driver looks like MP6543

  #389 opened 2 months ago by kennethblue
  0

• Mavic Air 2 Issue

  #387 opened 2 months ago by doordashdave007
  1

• DJI Smart Controller RM500 battery - can't unseal

  #386 opened 2 months ago by vvzinovyev
  0

• Mavic 3 battery can not unseal by dji battery killer v0.5

  #385 opened 2 months ago by nam220599
  0

• dji mini 4 pro decode with dji_imah_fwsig

  #384 opened 3 months ago by HackTeacher
  0

• trying to clear error 10016 on Air2 S

  #383 opened 4 months ago by Judslat
  4

• Mini 2 flight controller firmware

  #382 opened 4 months ago by gcarmix
  0

• Getting Error Logs from Mavic Air 2

  #381 opened 4 months ago by comsma
  7

• Phantom 4 batteries after years of not being used

  #380 opened 5 months ago by cesaralcaide
  0

• DFT

  #379 opened 5 months ago by Chilllik
  0

• What happens if you only update the drone firmware

  #378 opened 5 months ago by The11thPlague
  0

• After resetting the ph4 battery using the Dji battery killer again, there are errors in the bite register (XCHG,XDSG,SEC1,SEC2). Help!

  #377 opened 5 months ago by Ayesh-Dulshan
  0

• DJI battery killer

  #371 opened 6 months ago by flf3
  2

• Gimble clibrate Air 2s

  #365 opened 7 months ago by A-K-104
  1

• mini 2 error 40011

  #361 opened 9 months ago by comsma
  2

• Mini 2 SE gimbal stuck

  #360 opened 6 months ago by comsma
  0

• Mavic2Pro, Occusync, 4/5g Modem

  #374 opened 6 months ago by ratfink11
  0

• How to lower downgrade firmware DJI MINI 2 from 01.04.000 - 01.06.0200 to 01.03.0000?

  #339 opened a year ago by Olemarchick
  5

• Phantom 4 I2C reading one chip only

  #373 opened 6 months ago by RiaanAspeling
  1

• What RTOS?

  #363 opened 6 months ago by joelreymont
  2

• Website of LANRUISI connectors manufacturer

  #370 opened 7 months ago by BohdanHolyshevskyi
  1

• In Wiki section Mavic 2 Pro coreboard 2.4Ghz Amp name mentioned is wrong

  #369 opened 7 months ago by akhilzid
  1

• Issue reading battery using cp2112. Cell voltage 3.5v

  #368 opened 7 months ago by bigjoncoop
  0

• LinearHall calibration not working on Mavic Mini

  #348 opened a year ago by jla555
  2

• Ronin mx battery BQ30Z55 not reading and unsealing

  #366 opened 7 months ago by CactusMeter
  0

• What binary handles DUML?

  #364 opened 8 months ago by LeeeeHaaaan
  2

• dji frimwhere tool

  #362 opened 9 months ago by SERVICEDRONE
  0

• Gl300 Interface Board Failed Device Add

  #358 opened 9 months ago by nullibyte
  3

• invert pitch on dji fpv remote controller 2

  #357 opened 9 months ago by dimiandre
  0

• Marvin Pro BQ30z55 FEC Checksum Error

  #354 opened a year ago by ByteMasterFlinki
  3

• Phantom 2 Vision Plus CV310 gimbal top board red light issue

  #353 opened a year ago by fadetonoir
  2

• mini 2 working without RC

  #352 opened a year ago by andreamanera
  3

• Add aditional infomration to P3 batteries wiki pages

  #350 opened a year ago by brajomobil
  6

• I know his contact.

  #344 opened a year ago by Michael515613
  1

• comm_og_service_tool.py Required Arguments

  #349 opened a year ago by UVTRyan
  0

• Mavic air always LED Battery ON and dron starts, when insert the battery

  #347 opened a year ago by nekropolis
  0

• Mavic 2 Zoom (WM240) Gimbal Calibration

  #346 opened a year ago by UVTRyan
  2

• DJI Mavic (WM220) Part P01786.12 (Board Pitch Motor)

  #345 opened a year ago by rsrmdp
  1

• I rebuilt my Mavic Pro 2 battery pack. One led is blinking constantly and I can't access the bms with the battery killer software and the cp2112 board. I can access all my other batteries. Did I kill the BMS?

  #341 opened a year ago by TCB911
  0

• Error: Cannot compute image file head signature, auth key 'PRAK' has no private part.

  #340 opened a year ago by top7chip
  3