/com.go-e.charger

Homey app for the go-e Home and Gemini family of EV chargers

Primary LanguageJavaScriptGNU General Public License v3.0GPL-3.0

go-e Charger

Smart EV Charging from go-e

Adds support for the go-e Home and Gemini family of EV chargers for the Athom Homey Pro.

Setup

  • 1st and 2nd generation devices must have fixed IP address.
  • 3rd and 4th generation devices are automatically detected with mDNS-DS in the same LAN.
  • API V1 must be enabled on the 1st and 2nd generation devices.
  • API V2 must be enabled on the 3rd and 4th generation devices with firware 051.4 or above installed.

Supported devices

go-e Charger Home+

  • 1st generation devices with serial numbers starting with CC1- (API V1)
  • 2nd generation devices with serial numbers starting with CM-02- (API V1)
  • 3rd generation devices with serial numbers starting with CM-03- (API V2)

go-e Charger Gemini

  • 4th generation devices with serial numbers starting with GM-10- (API V2)

Supported flow cards

When

  • Status changed
  • Car connection changed
  • Charging allowed changed
  • Charging changed
  • Delivered Energy This Session becomes greater/less than numberkWh
  • Supplied Power becomes greater/less than numberW
  • Supplied Current becomes greater/less than numberA
  • Supplied Voltage becomes greater/less than numberV
  • Temperature becomes greater/less than numberC
  • Charge Port Temperature becomes greater/less than numberC

And

  • Car is/isn't connected
  • Charging is/isn't allowed
  • Is/Isn't charging

Then

  • Allow charging
  • Stop charging
  • Change current limit to amperageA

Example flows

Example flows