ohAnd/3DPrinterStatus

Issues

• stablize session to the printer - re-connect/ retries

  #18 opened 2 years ago by ohAnd
  0

• [FEATURE] give user info if printer connection is blocked

  #26 opened 2 years ago by ohAnd
  0

• template area: offer also existing "good" sources for 3d model creation/ design

  #6 opened 2 years ago by ohAnd
  0

• BUG: wrong link to release page in settings

  #21 opened 2 years ago by ohAnd
  0

• notification: local push notification, if printer job is done

  #11 opened 2 years ago by ohAnd
  0

• notification: local push notification with progress as a permanent info during printing

  #16 opened 2 years ago by ohAnd
  0

• notification: local single push notification every 10% during printing

  #19 opened 2 years ago by ohAnd
  0

• use printer IP/ host also for webcam link

  #5 opened 2 years ago by ohAnd
  0

• changed data value from printer should be visualized

  #3 opened 2 years ago by ohAnd
  1

• notification: should be switchable on/off in settings

  #17 opened 2 years ago by ohAnd
  0

• searching for printer in the local network and offer take over

  #14 opened 2 years ago by ohAnd
  0

• show the video stream of webcam directly inside the app

  #15 opened 2 years ago by ohAnd
  0

• notification: progess of printing should be optionally shown as an notification

  #13 opened 2 years ago by ohAnd
  0

• notification: local push notification, if printer accidently stopped

  #12 opened 2 years ago by ohAnd
  0

• darkmode: switch darkmode in systemsettings

  #10 opened 2 years ago by ohAnd
  0

• darkmode for the whole ux template

  #9 opened 2 years ago by ohAnd
  0

• visualize current and/ or last few layers of printing

  #8 opened 2 years ago by ohAnd
  0

• graph for extruder and bed temperature

  #7 opened 2 years ago by ohAnd
  0

• connect button text/ color according to session state

  #4 opened 2 years ago by ohAnd
  0

• prevent printer connection with default values

  #2 opened 2 years ago by ohAnd
  0

• trigger external IFTTT, if printer job is done

  #1 opened 2 years ago by ohAnd
  0