makefileto build new .bin files in console, and version them- arduino
au()function to fetch a new .bin file and autoupdate itself plackserver to handle requests, compare versions, and returns .bin files or 304
I'll go ahead and build a new .bin file for my feather huzzah esp8266:
oha@raspberrypi:~/work/firmware/arduino/example $ make
sed -i "s/%VER%[0-9]*%/%VER%1522176805%/" autoupdate.h
/home/pi/Downloads/arduino-1.8.5/arduino --verify --board esp8266:esp8266:huzzah:CpuFrequency=80,FlashSize=4M1M,LwIPVariant=v2mss536,FlashErase=none,UploadSpeed=115200 --pref build.path=./build/ *.ino
Picked up JAVA_TOOL_OPTIONS:
Loading configuration...
Initialising packages...
Preparing boards...
Verifying...
Archiving built core (caching) in: /tmp/arduino_cache_723975/core/core_esp8266_esp8266_huzzah_CpuFrequency_80,FlashSize_4M1M,LwIPVariant_v2mss536,Debug_Disabled,DebugLevel_None____,FlashErase_none,UploadSpeed_115200_280111de7025b2af083c77835ebbed26.a
Sketch uses 264232 bytes (25%) of program storage space. Maximum is 1044464 bytes.
Global variables use 33820 bytes (41%) of dynamic memory, leaving 48100 bytes for local variables. Maximum is 81920 bytes.
oha@raspberrypi:~/work/firmware/arduino/example $
If you use the mqtt template, the Makefile will also:
mosquitto_pub -t 'MyHome/home/sys/update' -m "*"
The given example checks for a new version of the software only on book, so you need to reset it. Note: the first time you have to upload the image via usb connection, I'm assuming you already did.
INIT /home/oha/work/firmware/arduino/example/example.ino Mar 27 2018 18:50:54
connecting to MY_SSID...
connected: 192.168.1.102
[INFO] autoupdate firmware.oha.it:80 - name: example
[INFO] cmdline: HTTP/1.1 200 OK
[INFO] Server: nginx/1.10.3
[INFO] Date: Tue, 27 Mar 2018 18:54:10 GMT
[INFO] Content-Length: 268384
[INFO] update content-length: 268384
[INFO] Connection: close
[INFO] Author: oha[at]oha.it
[INFO] flashing .bin file
update stored 268384 bytes
Update successfully completed. Rebooting...
ets Jan 8 2013,rst cause:2, boot mode:(3,6)
load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
v614f7c32
@cp:0
ld
INIT /home/oha/work/firmware/arduino/example/example.ino Mar 27 2018 18:53:36
connecting to MY_SSID...
connected: 192.168.1.102
[INFO] autoupdate firmware.oha.it:80 - name: example
[INFO] cmdline: HTTP/1.1 304 Not Modified
[INFO] nothing to update
If you are using the MQTT template, the update is triggered on MyHome/home/sys/update, no need to reset the device.
here what happen on plack during the autoupdate:
oha@raspberrypi:~/work/firmware $ plackup
HTTP::Server::PSGI: Accepting connections at http://0:5000/
AU 'example' dev: '366464'
client: Tue Mar 27 18:50:43 2018
server: Tue Mar 27 18:53:25 2018
192.168.1.1 [Tue Mar 27 18:54:10 2018] 11.25ms 200 GET /autoupdate/example
AU 'example' dev: '366464'
client: Tue Mar 27 18:53:25 2018
server: Tue Mar 27 18:53:25 2018
304 Not Modified at /home/oha/work/firmware/app.psgi line 25.
192.168.1.1 [Tue Mar 27 18:54:27 2018] 8.27ms 304 GET /autoupdate/example
It's probably not the best way, but it works.
The Makefile modify autoupdate.h before compiling it, and marking a %VER%123456% string with the current timestamp (epoch)
After the arduino compiler finish, the string is baked into the .bin file, and available both to the au() function, and the plack server, so when a new .bin file is requested, plack can compare the given version to the last built, and refuse the download with a 304 if they match.