New in release 3.0.0: ESP32 support driving up to 49152 LEDs / DMX512 support / Bootloader Update and "New Bootloader full Mem" / Important bug fixes
Excel user interface to configure the LEDs without programming at all improved by the engagement of Pattern Configurator and Program Generator!
To start the excel program press the Win+r key together and copy the following line into the "Run" dialog and press enter: %USERPROFILE%\Documents\Arduino\libraries\Mobaledlib\extras\Prog_Generator_MobaLedLib.xlsm
The use of RGB LEDs offers fascinating possibilities for lighting a model railway:
- Infinite number of lighting effects - Brightness and color of each LED can be set individually and dynamically
- Easiest cabling - The objects (houses, traffic lights, ...) are simply plugged into a multiple socket
- Extremely affordable - 100 LEDs for the price of three "normal" lights
- Up to 256 RGB LEDs (768 channels) can be controlled by an Arduino
- Up to 16384 RGB LEDs (49152 channels) can be controlled by an ESP32
- Controlling other components is just as easy
- Sound modules
- Servo and stepper motors
- Charlieplexing light signals
- Power devices
- Additional module to read 80 and more switches with 10 signal wires
- Stand-alone operation or networked with other components possible
The lighting and some additional functions are controlled via the WS2812 / WS2811 chips. For this, only a single signal is required which is forwarded from one chip to the next. This makes the wiring extremely easy.
A lot of examples show the usage of the library. They could be use as startup for own programs.
A huge wiki describes the complete MobaLedLib in detail: https://wiki.mobaledlib.de/doku.php
This library is used and supported by a big community, see https://www.stummiforum.de/viewtopic.php?f=7&t=165060.
All software and hardware parts are free of license and avaiable for download.
Several videos demonstrate the possibilites of the library. You will find a lot of articles when searching for MobaLedLib in the internet.
ATTENTION: Always use the actual Arduino IDE (Old versions 1.6.x and below don't support the directory structure used in the library examples)
Installation from the Arduino IDE: Sketch / Include library / Manage libraries Type "MobaLedLib" in the "Filter your search..." field Select the entry and click "Install"
Installation in der deutschen Arduino IDE: Sketch / Bibliothek einbinden / Bibliothek verwalten "FastLED" in das "Grenzen Sie ihre Suche ein" Feld eingeben Gefundenen Eintrag auswaehlen und "Install" anklicken
Questions / suggestions / praise / ... MobaLedLib@gmx.de
Revision History:
Ver.: 0.7.0 20.12.18:
- First released version
Ver.: 0.7.5 19.01.19:
- Added examples:
- Burning house (Push button action with fire, smoke, sound and fire truck). Shown in the video: https://vimeo.com/311006857
- DCC (Digital Command Control) decoder example with two Arduinos. Shown in the video: https://vimeo.com/311996452
- Added function Bin_InCh_to_TmpVar() and RGB_Heartbeat2()
- Added zip file with the RGB LED distribution PCBs
- Improved the fire algorithm
- Corrected the binary mode of the counter (CF_BINARY)
- Corrected the initialization of the Pattern function if the Goto mode is used.
- Updated the English documentation to the same state like the German.
- Using the correct version of the Pattern_Configurator.xlsb
Ver.: 0.7.7 17.02.19:
- Added Support for Sound modul JQ6500
- Corrected the random mode of the Counter() function
- Improved the serial input debug function
- Moved the Heartbeat function in own H-file"
- 12.03.19:
- added ButtonNOff() macro
Ver.: 0.7.8 09.04.19:
- Added examples
- 00.Overview
- 25.Analog_Push_Button
Ver.: 0.7.9 09.07.19: Moved the Pattern_Configurator to the "extras" directory and updated the excel version.
- Nice graphical display of the LED brightness and the Goto mode
- Reduced the size by extracting the examples
- Added a menu to save/load/delete example sheeds
- User interface is automatically switched to English (Example descriptions still German)
Ver.: 0.8.0 16.07.19:
- Added new assembly document for the main PCB from Alf and Armin
Ver.: 0.9.0 27.09.19:
- New Excel User interface to configure the LEDs
- Single LED functions for the House() macro
- Macros for Light signals, Construction lightning, ... added to the library
Ver.: 0.9.1 06.10.19:
- Corrected the functions Flash(), RandWelding() and PushButton_w_LED_0_? in the Prog_Generator
- Corrected single LEDs in the House() and GasLights() function.
Ver.: 0.9.2 30.10.19:
- Corrected the XPattern function (used in the Light signals)
- Corrected the Excel Programs
Ver.: 0.9.3 08.12.19:
- Engagement of Pattern_Configurator and Program_Generator => Easy exchange between the tools
- CheckColors function: Live view of the colors and brightens of the LEDs
- Existing lines could be edited in the Prog_Generator
Ver.: 1.0.0 16.01.20:
- New Charlieplexing program for the Servo_LED module which could be used to drive Viessmann and other "Multiplexed" light signals
- Configuration upload from the Pattern_Configurator over the LEDs "Bus" to the Charlieplexing module. The module is configured on the railway layout.
- Direct programming support for the Tiny_UniProg module from excel (One click to install the software)
- Flashing of the software for the Charlieplexing Module from excel (One click to install the software)
- Enhanced Color Test program with a lot of new features
- New Black and White TV simulation (configurable)
- Simulation of defective neon lights added
- 1001 of other small changes and improvements
Ver.: 1.0.1 17.01.20:
- Corrected the upload in version 1.0.0 because some files have not been update ;-(
Ver.: 1.0.2 18.04.20:
- Test of switch and variables
Ver.: 1.0.3 01.05.20:
- Test of additional LED channels and EEPROM Storage
Ver.: 1.0.4 23.05.20:
- Automatically detecting COM port the Arduino is connected to
- Improved the HV_Reset() in the Tiny_UniProg according to Juergens tipp
- New macros InCh_to_TmpVar1() and Bin_InCh_to_TmpVar1() which start with state 1 instead of 0
- New macros for Servos and Herzstueck polarisation
- New Push Button macros which read DCC and hardware buttons
- Added macros Andreaskreuz with lamp test
Ver.: 1.0.5 31.05.20:
- Automatically install all libraries
- Using the Sketchbook path for the working directory
Ver.: 1.0.6 06.06.20:
- Added Mishas LED Previev and Mux functions to the Pattern_Configurator
- Using Harolds new pyProgGen_MobaLedLib
- Using the new USB port detection also in the Pattern_Configurator
Ver.: 1.0.7 07.06.20:
- Corrected the LED Animation, the "Start LedNr" in combination with "HerzHerz_BiRelais()"
Ver.: 1.9.4 14.06.20:
- Added Misha's Multiplexer to the Prog_Generator
Ver.: 1.9.5 15.06.20:
- The versions 1.0.2 - 1.9.4 are not released test versions.
- Since there are a huge number of changes since version 1.0.1 all details are described here: https://www.stummiforum.de/viewtopic.php?f=7&t=165060&sd=a&start=2410
Ver.: 1.9.6 22.07.20:
- Preview LEDs in the Pattern_Configuarator could be moved on top of a picture or under a transparent picture (by Misha)
- Speedup building and uploading of the Arduino program 10 sec. instead of 23 sec. (by Juergen)
Ver.: 1.9.6 C 28.07.20:
- Corrected Servo programming (Flash was erased when setting the Reset pin as output)
- Corrected decimal separator problem when loading pattern examples
- New macros for servo with SMD WS2811 Herz_BiRelais_V1...
Ver.: 1.9.6 D 04.08.20:
- Limit the maximal servo value to 210 (Old 220) to avoid promlems with measurement errors at 2kHz
- Additional Delay and check if the old directory has been deleted when updating the Beta version
Ver.: 1.9.6 E 07.08.20?:
- Deletted >100000 columns in the DCC sheet which slowed down the loading of .MLL_pfg files
- Added a status display when loading the .MLL_pfg files
- Don't read/save the "Examples sheet from/to .MLL_pfg file
Ver.: 1.9.6 F 07.10.20:
- Programming of the fast bootloader added
- Jürgen has added "Update_Start_LedNr" to the end of Read_PGF_from_String_V1_0() because other wise NUM_LEDS is 0
- New function "Mainboard_LED(MB_LED, InCh)" which could be used to use the mainboard LEDs as status LEDs
- Added macro "WeldingCont()" which continuously flickers while the input is active.
- Don't use the Heartbeat LED at PIN A3 if the CAN bus is used AND the SwitchB or SwitchC is used.
- Generate an error message if Mainboard_LED(4..) is used together with SwitchB or SwitchC.
- Created an example file to test the MobaLedLib main board: "Mainboard_Hardware_Test.MLL_pgf" This file is stored in the directory "Prog_Generator_Examples" which is copied to the library destination at startup.
- Added DayAndNightTimer which could be used with then Scheduler function
Ver.: 1.9.6 G 10.10.20:
- Added additional pins to the Mainboard_LED function. Now nearly every pin could be used as LED pin (New channels 0, 5-16).
- New method "LED_to_Var()" to set variables controlled by the LED values.
- Improved the "Mainboard_Hardware_Test.MLL_pgf". Now the mainboard could be tested without the PushButton4017 board.
Ver.: 1.9.6 H 10.10.20:
- Improved the loading of MLL_pgf files
Ver.: 1.9.6 I 10.10.20:
- Possibilitiy added to ignore problems with the baud rate detection
Ver.: 1.9.6 J 11.10.20:
- The Mainboard_LED function also acceppts the arduino pin numbers D2-D5, D7-D13 amd A0-A5
Ver.: 1.9.6 K 16.10.20:
- Don't gray out the other rooms in the House/Gaslight dialog. Instead the important buttons use bold font
- User interface:
- Corrected the entering of selextrix data and the position of the USB simulation buttons
- Corrected the "Dialog" Button. The "Type selection" dialog was called twice in DCC mode.
- Disabled the "ENABLE_CRITICAL_EVENTS_WB" to hopefully get rid of the crash which is generated if lines are deleted in the Pattern_Configurator. By disabling this events the LED numbers are not updated if lines ade hidden or shown again.
- Corrected the NEON_DEF2D entry. Channel 1 was used instead of channel 2. This caused the occupation of a new RGB channel if NEON_DEF1D and NEON_DEF2D was used in a sequence
- Improve the detection probability in "DetectArduino()". Prior the arduino was not always detected at the first trial.
- Corrected the error detection for the ATtiny upload
- Increased the number of Time entries from 30 to 64 and corrected the entries 24-30
- New Charliplexing software which supports the 64 time channels
Ver.: 2.0.0 18.10.20:
- Support for the new buffer gate on mainboard version 1.7 added
Ver.: 2.1.0 02.11.20:
- 8% additional configuration memory by changing the reserved size of the fast bootloader from 2K to 512 byte
- Corrected the support for 64 time entries in the pattern_Configurator. Unfortunately the prior changes have been made in a wrong worksheet and not in the Main sheet => They have been lost when the release version was build ;-(
- Corrected the importing of data from old Prog_Generator
- Define at least 20 LEDs to be able to test them with the color test program
- Disabling the Event which is called when Enter is pressed when the workbook is closed. Hopefully this solves the problem that the Pattern_Config is opened sometimes unintentionally
- Prevent crash if a wrong formula is entered like "-Test"
- Updating the arduino type in the "Options" dialog if the USB Port detection is started
- Charlie_Buttons and Charlie_Binary control 3 channels (RGB) instead of 2 (GB)
- Corrected the maximal time for the Blinker function by adding PF_SLOW
- Disable the mouse scroll function for Office <= 2007 because here excel generates a crash
Ver.: 2.1.1 14.11.20:
- Removed the old Debug functions to simulate DDC commands TEST_PUSH_BUTTONS(), TEST_TOGGLE_BUTTONS() and TEST_BUTTONS_INCH()
- Experimental support for ESP32 added
Ver.: 3.0.0 21.04.21:
- Release support of ESP32 and up to 49152 single LEDs
- Support controling DMX512 devices (up to 300 per channel)
- Bootloader Update and "New Bootloader full Mem"
- Up to nine independent LED channels
- Search function in macro selection
- TinyUniProg improvements
- Fixed problem scaling the house dialog for small screens (1366x768)
- Added seven new railway signal macros
- Ability to switch the LED portocol to WS2811 where the Red and Green channel are swapped
- Faster method to download and execute the color test program
- Use only one column for start led number display, may be configured on config page
- Add Macro #define COMMANDS_DEBUG traces DCC messages
- Corrected the "fire" macro
- Fix issue where directory names contain blanks
- Fix DCC offset problem when sending simulated DCC commands
- Speed up ResetTestButtons function
- And many, many more features and bugfixes, ... Let yourself be surprised!