Reset is not working while flashing
Opened this issue · 3 comments
Hi,
I builded Rev1.2 with a few parts switched (Different LEDs because Kailh switches, different SMD LEDs SK6812 because they seemed a good option for the ws2812b). I finally installed all parts and also got my self-made TRRS cable running (I Tested the connections and there is no error in the cable).
My qmk setup:
multibuild.keymap=default
user.keyboard=ergodash/rev1
user.keymap=makanuAnd the keymap makanu is at the moment just a copy of the default keymap.
When I use the command qmk flash, the command ends up with Detecting USB port, reset your controller now... and pressing the reset button doesn't do anything.
Additional I recognized that the switch LEDs on the right side are dimmed. This also happens if I switch master side.
Any hint where I should start measuring with a multimeter, to provide further informations?
Hey MaKaNu, I am having the same problem, but I noticed that it works for the left hand but not the right hand. Were you able to find the issue?
Sadly not until now. My first idea was faulty soldering, but I was unable to find the issue. At the moment I have a de-soldered micro controller which is probably defect, because of the de-soldering. Sadly the project is on stall for me at the moment. I am also not really happy about the soldering position of the micro-controller, since it is so close to the pins.
I'm wondering if it's an issue with the bootloader. I'm going to try rewriting the bootloader and I'll let you know if that fixes it