omkbd/ErgoDash

Issues

• # QMK and Svlinky VIK RP2040 Controller

  #51 opened 13 days ago by Atthis
  0

• Right half keys not working

  #24 opened 5 years ago by callebjorkell
  9

• Idea: Rotary Encoder

  #22 opened 5 years ago by dmcgits
  13

• Reset is not working while flashing

  #44 opened 3 years ago by MaKaNu
  3

• Adds led lights for the top edge

  #50 opened 2 years ago by phucdzvcll
  0

• Via cannot detect my ergodash

  #48 opened 2 years ago by hailee0710
  1

• Firmware link broken

  #47 opened 2 years ago by aplnx
  2

• what is rev2

  #1 opened 6 years ago by pashky
  3

• Underglow RGB LEDs not working on both sides

  #46 opened 3 years ago by ryzhkovvv
  2

• Slave Hand RGB Underglow not working

  #45 opened 3 years ago by GiannottiRod
  1

• Plans to add revision 1.3 or 2.0 PCB schematics and spec?

  #27 opened 3 years ago by richerve
  12

• Possible substitute for IRLML6344TRPbF

  #43 opened 3 years ago by ChocolateOverflow
  0

• Alternative for the MJTP1117 switch

  #42 opened 3 years ago by MaKaNu
  2

• parts says 66-70 keys, couldn't you use 72?

  #41 opened 3 years ago by jack-faller
  2

• Hole size for Pro-Micro's too small for Hotswap sockets

  #36 opened 4 years ago by clembo1
  1

• Update parts list for M2x6mm spacer to "M2×6mm threaded spacer"

  #40 opened 4 years ago by clembo1
  0

• Sugestion: Increase extra thumb key connection pads to 4mm each (JLCPCB Audit failing)

  #39 opened 4 years ago by rafaeldelboni
  0

• arcgis

  #38 opened 4 years ago by Bouba15
  0

• MJ-4PP-9 TRRS jack not available in europe

  #35 opened 4 years ago by derwana
  1

• M2 spacers height

  #33 opened 4 years ago by GioTB
  3

• Confusion about spacers

  #26 opened 4 years ago by strayer
  0

• Making the pcb and case Alps friendly.

  #29 opened 4 years ago by oprietop
  1

• Is EE_HANDS supported?

  #28 opened 5 years ago by BoKKeR
  1

• A problem I don't understand. Please help me

  #25 opened 5 years ago by kien242
  0

• Printing PCB

  #21 opened 5 years ago by dmcgits
  1

• No right side backlight LEDs lit

  #19 opened 5 years ago by brethash
  5

• LEDs and inconsistant keys

  #18 opened 5 years ago by nutimnot
  19

• Facing issues sourcing the MJ-4PP-9

  #16 opened 5 years ago by strayer
  2

• Have you consider to support hotplug socket for switch ?

  #20 opened 5 years ago by hpo14
  1

• Supported Stabilizers

  #10 opened 5 years ago by christo-san
  1

• the documentation is extremely confusing!

  #12 opened 5 years ago by rmarinbe
  1

• does ergodash support to use Ergodox EZ configurator

  #15 opened 5 years ago by hpo14
  2

• Piezo speaker placement

  #17 opened 5 years ago by brethash
  2

• Parts list does not include speaker

  #7 opened 5 years ago by GreenShadowMaker
  1

• ErgoDash mini pcb missing

  #3 opened 6 years ago by CicelyWang
  2