Slave Hand RGB Underglow not working
Closed this issue · 1 comments
Hi,
So, I have built this about 2 months ago now, but RGB LEDs and MOSFETs took a while to get here. I have never had any issues before this. I soldered the main head first and had everything working as soon as I updated my firmware to have a RGB_TOGG. However, when I soldered the slave hand I couldn't get it to light up. I considered the problem could be MOSFET/ MOSFET soldering issue, so I unsoldered it and replaced it for a new one, but still no luck. So I soldered some LEDs to some keys to test the behaviour.
So, now my current situation is:
When I connect the main hand or both only main hand RGB works and both hands 3mm LED work. However, I can only toggle off the LEDs on the main hand.
All keys are working perfectly, RGB controls to the main hand also work.
I have a video to illustrate the 3mm led only being turned off on the main hand issue.
[EDIT 1] just to clarify, changing the USB cable to my right hand does not change the behaviour. Probably should have changed the issue name to right hand LED not working instead of Slave hand.
Ok. I am dumb and forgot to solder 1 pad on the very first RGB LED. lightning works ok now. Right Hand 3mm LED still does not go off. Ill just desolder it.