/qmk-animations

OLED animations for QMK

Primary LanguageCMIT LicenseMIT

Animations for QMK OLED displays

This repository contains some animations for QMK keyboard firmware.

They are tested on my Corne Keyboard build, but should work just fine on any other with 128x32 OLED display (Lily58, Sofle, etc.).

You can preview all animations on Demo page

How to use

To use any of these you need to be building your firmware locally. Follow steps from here if you don't do it already: Setting Up Your QMK Environment

Enable required functions

You need to have OLED driver enabled in your firmware, usually you also need to enable WPM counter in QMK so animation knows how fast you are typing. Just put these in your rules.mk file:

WPM_ENABLE = yes  # Enable word per minute counter
LTO_ENABLE = yes  # Makes hex file smaller
OLED_ENABLE = yes # Enable OLEDs

LTO_ENABLE is not really required, but animations take a lot of space and it makes firmware smaller. Otherwise you might not be able to flash your controller. Usually you will need this if you're on ATMega/Pro Micro controllers. On STM chips theres plenty of free flash memory, so you might just skip it.

Setup OLED rotation

All animations assume you're using vertically mounted OLED (like in Corne). In the header of the animation file there will be a suggested rotation option to set in your keymap.c file. It should be enough to just put something like this at the beggining:

#ifdef OLED_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
  if (!is_keyboard_master()) {
    return OLED_ROTATION_180;
  }
  return rotation;
}
#endif

This will play animation only on secondary half of the keyboard. Adjust to your needs.

Enable animation

Just copy all animation .c files to your keymap folder, include selected one at the top and use inside keymap.c:

/**
* Put this somewhere at the beginning of the file --
* Make sure you import only one of animations at a time
* They all have same function exported, so it won't compile if you
* include more than one at a time. You can also configure some options
* before including the animation. Not all animations support them, but some do :P.
*/
#define ANIM_INVERT false
#define ANIM_RENDER_WPM true
#define FAST_TYPE_WPM 45 //Switch to fast animation when over words per minute

#ifdef OLED_ENABLE
#include "demon.c"
#endif

// -- Probably some other stuff and then --

#ifdef OLED_ENABLE
bool oled_task_user(void) {
  if (!is_keyboard_master()) {
    oled_render_anim();
  }
  return false;
}
#endif

Again, this assumes you have a split keyboard and want to display animation on the secondary half. Adjust to your keyboard.

Fix a second half

If you want to leave the standard Corne logo on another part, you will need to use this function, and call it inside the oled_user_task.

void oled_render_logo(void) {
    static const char PROGMEM crkbd_logo[] = {
        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
    0};
    oled_write_P(crkbd_logo, false);
}
bool oled_task_user(void) {
  if (!is_keyboard_master()) {
    oled_render_anim();
  } else {
    oled_render_logo();
  }
  return false;
}

Build and flash your firmware

For example:

make crkbd:marek:flash

where “marek” is your folder inside the keyboard keymaps folder.

Troubleshooting

My firmware is too big and won't flash

Animations take a lot of memory on the microcontroller. What you can do to still make it work, is to disable backlight LED animations.

If you don't need them at all, just disable everything in rules.mk

RGBLIGHT_ENABLE = no

If you want to keep some simple LED backlight you can also try to disable most of them. Here's what worked for me:

Open config.h file in your keymap and:

  • Disable LED animations by commenting out #define RGBLIGHT_ANIMATIONS
  • Remove all animation data from firmware by adding these:
# define DISABLE_RGB_MATRIX_ALPHAS_MODS
# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define DISABLE_RGB_MATRIX_BREATHING
# define DISABLE_RGB_MATRIX_BAND_SAT
# define DISABLE_RGB_MATRIX_BAND_VAL
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define DISABLE_RGB_MATRIX_CYCLE_ALL
# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define DISABLE_RGB_MATRIX_DUAL_BEACON
# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
# define DISABLE_RGB_MATRIX_RAINBOW_BEACON
# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define DISABLE_RGB_MATRIX_RAINDROPS
# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define DISABLE_RGB_MATRIX_TYPING_HEATMAP
# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define DISABLE_RGB_MATRIX_SPLASH
# define DISABLE_RGB_MATRIX_MULTISPLASH
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH

This will still leave you few simple LED effects and free quite a lot of memory.

You can also comment out the WPM render function if you don’t need it.

Support

If you like this, maybe you'll also like some other stuff I'm working on: