/irrecv_rgb_led

An arduino program that controlls an RGB led with an IR controller

Primary LanguageC++

Set RGB led values with IR remote

This project was created specifically for an Arduino Nano atmega328, but it will work on simillar board as well.

Get Started 🚀

  • Clone the repo with
git clone https://github.com/ondrejhonus/irrecv_rgb_led
  • Install the IRremote library
  • Set your variables to match your setup
  • Upload your code to the board and enjoy

Usage

  • Enter a number in an interval from 0-255
  • Press your specified button for a color and the color lights up.
  • If you want to reset the colors, press the reset button

Dependencies