IPMITOOL Fails to Give Sensor Values both in Outband and IN-band
manojdesd opened this issue · 0 comments
manojdesd commented
- I tried viewing the Sensor data through IPMI command, But it shows the sensor names but not the sensor values.
-
The sensor values read from dbus could be viewed in the same path but not in IPMItool.
-
when i pass the command ipmitool sdr list i get to see that sensor are disabled.
-
When Check the journalctl log i get this debug print "Set up IPMI context" when i pass the ipmi command for sensor.
-
When i check for commands like mc info, chassis power the data is showing as expected.
Please support me in this. Some information could be useful.
BMC Version - OpenBMC 2.9
IPMI Version - 2.0