Issues
- 0
No threshold check when cache is enabled
#206 opened by jackcheng321123 - 2
The Test Password with the wrong length is throwing the error code 0xc7 instead of 0x81
#204 opened by Mani-v - 0
UT fails when switching lg2
#205 opened by lxwinspur - 3
- 1
- 8
Cannot load the provider of dynamic sensors
#190 opened by jannyau - 2
- 0
- 3
After Setting BootSourceOverrideTarget as Diags in Redfish, in IPMI chassis Bootparam get 5 command Boot Device Selector needs to show as "Force Boot from Diagnostic Partition".
#200 opened by KothaiSrini - 0
- 0
[Bug]ipmitool sensor cannot present correct values
#198 opened by justin0309 - 4
IPMI sol activate command is failing
#174 opened by rahulmah - 7
- 0
- 0
ipmitool fru and sel list
#196 opened by Govindharajen - 2
- 2
initSELCache fails during booting
#194 opened by trindenau - 8
IPMI and Redfish Showing different values of the same sensor at the same time.
#192 opened by cvam0000 - 2
Extra SDR Entries With Dynamic Sensors
#186 opened by iwoloschin - 1
IPMI: IPL: phosphor-ipmi-host.service SEGV core dumps during killall or stop ipmid
#191 opened by lxwinspur - 0
- 0
- 0
Cannot build if enable dynamic sensor
#187 opened by Yung-sheng - 0
- 1
ipmitool dcmi power reading do not work
#167 opened by hieuhuynh-ampere - 1
Remove inband IPMI support
#182 opened by sbteeks - 3
Dynamic Sensors Missing Symbols Breaks IPMI
#175 opened by iwoloschin - 1
- 0
- 2
IPMI get device ID returns wrong revision leading to ipmitool mc info displaying wrong firmware revision
#178 opened by marthauk - 0
- 0
Can not request write FRU with FRU's ID is 0
#176 opened by thangtran-ampere - 3
IPMI does not display power sensor value correctly
#172 opened by rahulmah - 1
Unable to enable disable SOL via IPMI
#173 opened by rahulmah - 0
Unable to activate IPMI payload
#171 opened by rahulmah - 0
- 0
Unable to set IPMI SOL parameter
#168 opened by rahulmah - 0
- 0
Export host BIOS information to D-bus
#165 opened by Kostr - 8
Presubmits for repos dependent on phosphor-host-ipmid failing intermittently
#163 opened by brandonkimbk - 1
- 1
How to modify the threshold of a sensor
#162 opened by kingzmm - 1
Meson Build
#157 opened by ruiz-go - 2
Event Data 2 type sensors return invalid data
#161 opened by jk-ozlabs - 0
- 0
Add SEL Entry command support
#159 opened by Andywjzhang - 9
- 0
- 0
bootstrap.sh prompts: Run "./configure ${CONFIGURE_FLAGS} && make" even if it fails.
#154 opened by drewmacrae - 0
bitbake build time: phosphor-ipmi-host-1.0+gitAUTOINC+6467ed247f-r1 do_compile
#153 opened by geissonator