SDS011 doesn't stop the fan after measurenments
Mr-Hacker11 opened this issue · 5 comments
Mr-Hacker11 commented
For a long time, the SDS011 no longer stops the fan after the measurement. My question is, is that how it should be?
pjgueno commented
Is the sensor actually connected to a WiFi Network ? Are the data displayed on the Map? Please send some pictures proving it. And give Board ID and Sensor ID.
If the sensor is not connected, the fan will turn for 10 minutes after reboot but it actually should stop afterwards.
Mr-Hacker11 commented
Hello, I checked everything. The fan always runs, no matter how it is connected. The sensor is also connected to the WLAN.
If you have any further questions, please contact me.
Best Regards
Simon Vogt
Hallo, ich habe schon alles überprüft. Der Sensor ist mit dem WLAN verbunden. Auch die Verbindung zum Sensor ist hergestellt. Auch das wechseln der Drähte bringt nichts.
Viele Grüße
Simon Vogt
Von: Pierre-Jean Guéno ***@***.***>
Gesendet: Freitag, 18. November 2022 11:36
An: opendata-stuttgart/sensors-software ***@***.***>
Cc: Mr-Hacker11 ***@***.***>; Author ***@***.***>
Betreff: Re: [opendata-stuttgart/sensors-software] SDS011 doesn't stop the fan after measurenments (Issue #971)
Is the sensor actually connected to a WiFi Network ? Are the data displayed on the Map? Please send some pictures proving it. And give Board ID and Sensor ID.
If the sensor is not connected, the fan will turn for 10 minutes after reboot but it actually should stop afterwards.
—
Reply to this email directly, view it on GitHub <#971 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARZR3BZN2F7XH5ORWQFGW63WI5LZ7ANCNFSM6AAAAAAR67SQ4A> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ARZR3BZHNTZ3YZ5SMSTXTJ3WI5LZ7A5CNFSM6AAAAAAR67SQ4CWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSOVLQXS.gif> Message ID: ***@***.*** ***@***.***> >
pjgueno commented
Please send me the Board ID, the Sensor ID and the link of the map with the Location. I will check.
Mr-Hacker11 commented
Hello,
the board ID is : 14621585. The Sensor Id is 18-11-16(4d78).
Here you can check the data. https://api-rrd.madavi.de/grafana/d/GUaL5aZMz/pm-sensors?orgId=1 <https://api-rrd.madavi.de/grafana/d/GUaL5aZMz/pm-sensors?orgId=1&theme=light&var-chipID=> &theme=light&var-chipID=
Since just now the sensor has been running normally again. The fan stops again.
Best Regards
Von: Pierre-Jean Guéno ***@***.***>
Gesendet: Sonntag, 20. November 2022 17:09
An: opendata-stuttgart/sensors-software ***@***.***>
Cc: Mr-Hacker11 ***@***.***>; Author ***@***.***>
Betreff: Re: [opendata-stuttgart/sensors-software] SDS011 doesn't stop the fan after measurenments (Issue #971)
Please send me the Board ID, the Sensor ID and the link of the map with the Location. I will check.
—
Reply to this email directly, view it on GitHub <#971 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARZR3B3XTAYUAV6E7XBJBKDWJJELHANCNFSM6AAAAAAR67SQ4A> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/ARZR3B5KCSH65ZRMO4AIZRLWJJELHA5CNFSM6AAAAAAR67SQ4CWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSOX52EG.gif> Message ID: ***@***.*** ***@***.***> >
pjgueno commented
That is no sensor ID and as I have told you the Sensor was not connected. It is for the past 1 hour. Please check the range of the router and change the PSU. At least 1500 mA. And please edit your comments on GitHub