opentechinstitute/commotion-router

Issues

• All clients connecting under 802.11g / Slow speeds

  #179 opened 9 years ago by Joannou1
  1

• Current commit fails to build

  #178 opened 9 years ago by mnoth
  2

• Can't compile against RAMIPS

  #177 opened 10 years ago by mnoth
  0

• "http://thisnode" alias not working on Windows clients

  #176 opened 10 years ago by andygunn
  4

• Rocket M2 does not load web page after initial configuration

  #169 opened 10 years ago by Protagonistics
  1

• TX offset not being added to TX power value

  #166 opened 10 years ago by andygunn
  2

• Meshing over Ethernet - Firewalls segment network

  #165 opened 10 years ago by andygunn
  0

• Captive Portal settings allow Welcome Page and Immediately Authenticate to both be checked

  #174 opened 10 years ago by gradyoti
  3

• CLI writes wrong interface to firewall rules

  #172 opened 10 years ago by gradyoti
  1

• command line setupwizard lacks permissions somehow

  #170 opened 10 years ago by gradyoti
  2

• Nanostation 2.4GHz (XM) not putting out over ethernet after initial flash

  #168 opened 10 years ago by Protagonistics
  0

• MikroTik RB411 w/ R52nM Wi-Fi card only shows 2.4GHz band

  #149 opened 10 years ago by andygunn
  2

• Add custom commotion upgrade utility

  #130 opened 10 years ago by dismantl
  2

• Building TP-Link WDR3600 and WDR4300 image (and likely 4310) missing configs

  #136 opened 10 years ago by andygunn
  2

• TP-Link WDR3600, WDR4300 splashes clients on Ethernet switch ports

  #137 opened 10 years ago by andygunn
  1

• TP-Link WDR4300 cannot create mesh networks with same name on two radios

  #138 opened 10 years ago by andygunn
  0

• Patch dnsmasq initscript to support dynamic interfaces

  #153 opened 10 years ago by gradyoti
  3

• Give router image files human-readable names

  #164 opened 10 years ago by andygunn
  2

• CMake version in debian package repository outdated

  #163 opened 10 years ago by gradyoti
  0

• Write CLI configure script

  #124 opened 10 years ago by critzo
  1

• New Airgrid M5's unable to be flashed with Commotion

  #161 opened 10 years ago by Protagonistics
  2

• Build and test image for TP-Link WDR842ND router

  #141 opened 10 years ago by andygunn
  7

• build and test image for TP-Link WDR1043ND router

  #142 opened 10 years ago by andygunn
  0

• Create user interface specification for new visualizer tool.

  #105 opened 11 years ago by jheretic
  3

• Add default babel configuration.

  #144 opened 10 years ago by jheretic
  0

• Build and test 1.1 image for Mesh Potato - MP2 model

  #148 opened 10 years ago by andygunn
  0

• Mikrotik RB433 LAN ports not used on initial config

  #158 opened 10 years ago by adamsteele
  3

• Commotion router should be able to block all traffic to host's LAN from Mesh

  #150 opened 10 years ago by Protagonistics
  4

• Is it possible to create a full image backup before upgrading?

  #126 opened 11 years ago by dismantl
  2

• Update config for IPv6 and Babel support

  #134 opened 10 years ago by gradyoti
  0

• Custom iptables firewall rules not being applied.

  #156 opened 10 years ago by BigJ64
  2

• block-mount package causes build errors

  #152 opened 10 years ago by gradyoti
  1

• wpa-supplicant-mini patch no longer works

  #151 opened 10 years ago by gradyoti
  0

• Interfaces set to only request DHCP leases also sometimes give them out

  #143 opened 10 years ago by jheretic
  1

• Firewall rule preventing routing between ethernet mesh and wifi mesh

  #128 opened 10 years ago by dismantl
  2

• passwd utility truncates passwords to 127 characters

  #146 opened 10 years ago by gradyoti
  0

• Alternate Commotion Themes

  #104 opened 10 years ago by glamrock
  2

• New TP-Link WDR4300 configs won't broadcast multiple APs

  #132 opened 10 years ago by areynold
  2

• TP-Link WDR4300 interface names not human readable

  #139 opened 10 years ago by andygunn
  1

• Wireless gateway breaks AP

  #140 opened 10 years ago by dismantl
  1

• Default wired network interface naming is incompatible with some 3rd party LuCI apps.

  #122 opened 11 years ago by jheretic
  1

• Version 1.0 and 1.1 mesh connections not compatible

  #113 opened 11 years ago by andygunn
  5

• eth0 DHCP leases intermittent

  #103 opened 11 years ago by glamrock
  2

• wlan0 appears as down despite AP up

  #102 opened 11 years ago by glamrock
  11

• ETX tooltip

  #100 opened 11 years ago by glamrock
  1

• Recent wpa_supplicant patch breaks build

  #115 opened 11 years ago by dismantl
  1

• Removing AP and adding a new one doesn't work

  #101 opened 11 years ago by glamrock
  1

• Updating from 1.0 to 1.1 with "Keep settings" throws non-fatal dispatcher error

  #112 opened 11 years ago by andygunn
  1

• Create default config file for TP-Link

  #110 opened 11 years ago by areynold
  0

• Confirm mesh connections work correctly

  #107 opened 11 years ago by critzo
  1