The Retro Gauge is a mechanical vehicle gauge that displays data received over a serial communication line. One possible use of the gauge is to display vehicle data from the [OpenXC platform][openxc].
The design intent was to keep the gauge as open and accessible as possible so that the community could contribute and benefit from the design.
For more details on the project, visit the project page on the OpenXC website.
For an instructional lab on how to build the gauge, see the Retro Gauge Lab.
TODO say something about these files
This repository is one of 4 repositories listed below:
Mechanical Enclosure Design - The retro-gauge-enclosure repository contains .STL and STEP files for the 3D printable gauge housing.
Hardware - The retro-gauge-hardware repository contains Eagle schematics and PCB layouts for the gauge's embedded hardware.
Firmware - The retro-gauge-firmware repository contains Arduino source code to run on the Retro Gauge.
Android - The retro-gauge-android repository contains an Android application to control the gauge with vehicle data from the [OpenXC platform][openxc].
The designs in this repository are available under the Creative Commons Attribution 4.0 International license.