oresat/oresat-antenna

Issues

• Burnwire resistor footprint need to be updated, and should include a second set of vias to hook the leads through

  #16 opened 4 years ago by davidalay
  0

• +Z endcard needs holes in the +X corners

  #15 opened 4 years ago by davidalay
  0

• Footprints of mezzanine RF connectors could use more solder paste, targets should have no solder paste.

  #14 opened 4 years ago by andrewgreenberg
  0

• Mezzanine board MUST clear Y frame bosses

  #13 opened 4 years ago by andrewgreenberg
  0

• BOM for both end card and mezzanine, and do an order for v1.0

  #11 opened 4 years ago by andrewgreenberg
  0

• Interconnect board between endcap and backplane

  #8 opened 4 years ago by glennl
  1

• Board design

  #9 opened 4 years ago by glennl
  1

• Determine board outline

  #3 opened 4 years ago by glennl
  1

• Upgrade OreSat Card to v1.2 due to small change in card outline

  #10 opened 4 years ago by andrewgreenberg
  0

• QBA-07+ foot print is incorrect; remove center pad's TSTOP and TCREAM layers.

  #12 opened 4 years ago by andrewgreenberg
  0

• RF Prototype Test

  #7 opened 7 years ago by glennl
  0

• Element deploy test

  #6 opened 7 years ago by glennl
  0

• RF test of actual bronze board

  #5 opened 7 years ago by glennl
  0

• Layout feed arrangement

  #4 opened 7 years ago by glennl
  0

• Create hybrid coupler in CS0 Specific Eagle parts library

  #2 opened 7 years ago by glennl
  0

• Determine 1/4 wave turnstile element mounting mechanism

  #1 opened 7 years ago by glennl
  0