/Lichtsaeule

OpenSCAD model to create a compactable light column from cheap parts

Primary LanguageOpenSCADMIT LicenseMIT

Lichtsäule (a compactable light column)

This is a compactable light column, using cheap and widely available components apart from the 3D printed ones. SCAD file is parametrizeable, it should work with any flexible PVC pipe and any camping rods.

Parts

  • The 3D printed parts from Lichtsaeule.scad
  • Camping rods (I used cheap aluminium rods with 30cm length + 4cm coupling extension, 8.4mm outer diameter/7.2mm coupling diameter)
  • 1m flexible PVC pipe with spiral wire (in germany, it's called "flexibler Abluftschlauch (PVC, weiß)"; I used 100mm diameter)
  • 1m of any IP30 LED stripe with a controller that fits in the base (I used 1m WS2812b IP30 stripe with 30 SMD5050 LEDs per meter, an ESP8266 D1 mini board with a FastLED example sketch and a separate USB connection module).

Photos

Light column in action

Light column inactive

Light column Base

Light column Parts

Light column Compact

Technical Views

Light column 3D printed parts in exploded view

Light column 3D printed parts in exploded view from the side

Light column 3D printed parts in compact view

Light column 3D print bed

Light column 3D print bed