Pinned Repositories
Arduino-LED-table
A table with a 16x16 matrix of WS2812B controlled by an arduino.
at90usb-board-tester
Test/demo software for my at90usb162 dev-board
avr_ws2812b
WS2812B driver for AVR(at90usb162 in particular)
deej
Set app volumes with real sliders! deej is an Arduino & Go project to let you build your own hardware mixer for Windows and Linux
DioderFirmware
Firmware for my USB controlled DIODER
DioderTools
Tools to control my RGB-light over USB
esp8266_NTP-MQTT_Client_wEPD
ESP8266 with e-paper display as NTP and mqtt client
fz-component-tester
Flipper Zero component tester
KiteLib
Universal wireless communication library for Arduino
ministm32_v3
Open source drivers for the mini-stm32 board built around libopencm3
ornotermes's Repositories
ornotermes/esp8266_NTP-MQTT_Client_wEPD
ESP8266 with e-paper display as NTP and mqtt client
ornotermes/fz-component-tester
Flipper Zero component tester
ornotermes/at90usb-board-tester
Test/demo software for my at90usb162 dev-board
ornotermes/deej
Set app volumes with real sliders! deej is an Arduino & Go project to let you build your own hardware mixer for Windows and Linux
ornotermes/KiteLib
Universal wireless communication library for Arduino
ornotermes/aprs-control
Control stuff over APRS
ornotermes/pig-eon
Pig-eon - Open Source Amateur Radio Modem
ornotermes/rpFreqCounter
Pi Pico / RP2040 PIO Frequency counter
ornotermes/scad-signs
Customizable signs made with OpenScad
ornotermes/WebLights
Control LED Lights from your webbrowser
ornotermes/3d_stained_glass_dhalia
3D printed stained glass dhalia
ornotermes/aprs-python
Python module for working with APRS
ornotermes/arduino-LoRa
An Arduino library for sending and receiving data using LoRa radios.
ornotermes/borg-scripts
BorgBackup scripts
ornotermes/Face
Exploration of the Heltech ESP32 OLED LoRA module.
ornotermes/Keyboard
ornotermes/LoRaLib
Arduino library for LoRa modules based on SX127x chip
ornotermes/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
ornotermes/MIDIUSB
A MIDI library over USB, based on PluggableUSB
ornotermes/MiniSTM32V3SkelCpp
ornotermes/multimon-ng
ornotermes/Pi-Star_Binaries_sbin
Repository for Pi-Star Binaries
ornotermes/python-antenna-toybox
Some code to play around with PyNEC to design / optimize antennas
ornotermes/python-ivi
A Python implementation of the Interchangeable Virtual Instrument standard.
ornotermes/python-vxi11
Provides a VXI-11 driver for controlling instruments over Ethernet
ornotermes/rtl-sdr-misc
A bucket of various work-in-progress rtl-sdr ideas.
ornotermes/slic3r-profiles
Contributed profiles for Slic3r; compatible with PrusaSlicer.
ornotermes/SuperSlicer
G-code generator for 3D printers (Prusa, Voron, Creality, etc.)
ornotermes/usb-cable-tester
USB cable tester
ornotermes/WordPress
WordPress, Git-ified. This repository is just a mirror of the WordPress subversion repository. Please do not send pull requests. Submit pull requests to https://github.com/WordPress/wordpress-develop and patches to https://core.trac.wordpress.org/ instead.