/Home-Monitoring-Raspberry-Pi-Node

Raspberry Pi & Node.js diy Home Monitoring & Intruder Alert system

Primary LanguageJavaScriptMIT LicenseMIT

Home Monitoring with Raspberry Pi and Node.js

Alt text

Description

The project is designed as a end to end solution for a DIY Home Monitoring & Intruder Alert system. Besides offering a live video stream on any device (web responsive client), it also actively monitors for movement with the help of a PIR sensor.

If an Alarm is triggered, you get a SMS notification on your phone and the snapshots taken during the Alarm time span (customizable - default is 1 minute) are uploaded via FTP to your server.

Activation / Deactivation of the Alarm Mode can be done in 2 ways:

  1. from the Web Client user interface
  2. with a Button - for convenience reasons: it is faster than connecting from your phone / pc & toggling the Alert Mode checkbox
    • there is a 10 seconds customizable delay which allows you to move out of the PIR sensor range
    • a Led indicates the Alarm Mode enabled/disabled status

In order to avoid false positives from the PIR motion sensor, extra checks were added - a detection counter & detection interval. The Alarm gets triggered when the sensor detects movement 3 times in 5 seconds (both values configurable in code).

Technology

The project was developed using:

  • Raspberry Pi - raspbian, brick button & led, Pir sensor
  • Node.js - for the main application
  • Mjpg_streamer - to generate the video stream
  • Shell scripting - for easy application start (interactive & background)
  • Htms/Css/Javascript + Bootstrap - the web client

Project components

Hardware

Alt text

this.Gpio = require('pi-gpio');
this.Hardware = { MotionSensor : 8, Led : 26, Button : 12 };
  • Raspberry Pi
    • I used Model B Revision 2 with Raspbian - any model should be Ok, just be careful with the Gpio configuration pin mappings, they can differ
    • Generic USB webcam (compatible with Raspberry Pi & Raspbian)
    • You can find a comprehensive list here http://elinux.org/RPi_USB_Webcams
    • I used a very old 2MP one which seems to work out of the box with the generic drivers
  • Led & Button
    Alt text
  • PIR motion sensor

Alt text

  • The one I used is available here https://www.sparkfun.com/products/13285
  • It normally connects to Analog Input (ex. on Arduino); however you can use it with Digital as well if you connect a 10K resistor between VCC & Signal
    Alt text
  • To make things easier you can purchase this sensor https://www.adafruit.com/products/189 and skip the soldering part (+ this one has configurable sensitivity built-in, so you might be able to skip the one implemented in the code)

Node application

Dependencies

  • express: ^4.12.3
  • ftp: ^0.3.10
  • http-auth: ^2.2.8
  • ini: ^1.3.4
  • pi-gpio: 0.0.7
  • socket.io: ^1.3.5
  • twilio: ^2.3.0

The dependencies you install with NPM:

npm install module --save

Generic Application.js

It is the basic application object, defined to be reusable in other projects Contains the basic server code, generic config file read/write operations, generic Init & Execute & Exit methods implementations

Home Monitoring ApplicationHM.js

  • config.ini file

    • default video quality & alert mode settings
    • Twilio sms Api Sid, Token, To number, From number
    • Ftp settings
  • Authentication (digest http authentication) - defaults are admin & password :)

    admin:Private:6982db7f1ddc36a0b47b5f8427dc3526
    
  • Web Client application

    • Accessible from anywhere via port forwarding
    • Available also on mobile (responsive web client)
  • Monitoring - gets video from Mjpg_streamer server and sends it to the connected app clients

  • Mjpg_streamer was used as server, but if you prefer another tool like ffmpeg, you can easily replace it because of the loose integration via the start-webcam.sh script

Alarm mode

  • Monitoring - via PIR sensor
  • Alarm - Sms notification (implemented with the help of Twilio text messaging API - very cool service, offers great Trial account for development
  • Alarm - Snapshots upload to server via Ftp

Web Client - responsive

The client application was designed to be accessible on all platforms (pc / tablet / mobile).

Alt text

Video streaming quality settings

By default the 480p at 25fps is enabled (initial settings are loaded from the config.ini file)

My webcam is a low-end 5+ years old 2mp device, but for those of you with better webcams I also added 720p & 1080p

Video resolutions & fps can be configured from the /static/js/script.js file

	ui.quality480p.change(function(){ ConfigUpdateQuality("640x480",25); });
	ui.quality720p.change(function(){ ConfigUpdateQuality("1280x720",15); });
	ui.quality1080p.change(function(){ ConfigUpdateQuality("1920x1080",5); });	

Alert Mode

  • initial state is loaded from the config.ini file
  • You can enable/disable monitoring from checkbox button in the UI
  • The state of the Alert Mode is shown both in the UI (the checkbox) but also by the LED
  • The physical Button can be also used to toggle the Alert Mode
  • All state changes are sent to all connected clients
  • If an Alarm is triggered, the UI checkbox button background will be changed to Red Alt text

Connected Clients

The dropdown shows a list of all connected clients (connection timestamp & IP) that are currently viewing the video stream
Alt text

Shell Scripts

start-app.sh

  • You can start the application in 2 modes:
    • Interactive (for dev / testing): ./start-app.sh
    • Background: ./start-app.sh -background
#!/bin/bash
# application start in interactive or background mode
#arguments:  [-background]

cd /home/pi/Desktop/rpiWorkspace/Node/HomeMonitoring/

if [ "$1" = "-background" ]; then
	sudo nohup node ./App-home-monitoring.js &>log.txt &
else
	sudo node ./App-home-monitoring.js 
fi

start-webcam.sh

  • Used by the application to enable/disable video streaming when clients are connected or when an Alarm is triggered by the PIR sensor.
#!/bin/bash
# webcam video stream
# arguments:  [resolution] [port] [fps]

pkill mjpg_streamer

sudo nohup ./mjpg-streamer/mjpg_streamer -i "./mjpg-streamer/input_uvc.so -y -r $1 -f $3 -q 75" -o "./mjpg-streamer/output_http.so -n -p $2" &

Application Execution Session example

Alt text


TO DO

  • Port the application to Windows 10 Iot on Raspberry Pi 2
  • Support for uploading snapshots to cloud (OneDrive / Dropbox) when an Alarm is triggered

References


Links