/bthome_nrf_door

BTHome door sensor using the nRF52

Primary LanguageC

bthome_nrf_door

BTHome door sensor using the nRF52840

This project implements a BTHome door sensor with nRF52840.

It assumes that a (NC) relay is connected between GPIO0.2 and GPIO0.26 of the nRF52.

Building

You need the nRF Connect SDK to build this sample.

Clone this repo in a folder under the samples folder in the nRF Connect SDK. To build for the nRF52840 DK run the west build command:

west build -b nrf52840dk_nrf52840

To build for other devices/boards replace nrf52840dk_nrf52840 with the correct one.