oxullo/Arduino-MAX30100

Issues

• Error on compile!

  #45 opened 7 years ago
  4

• Right now I am trying to run example code MAX30100-Minimal. Initially I get few readings which are not appropriate and after sometime serial monitor just stops working. Is this because I2C freezes due to noise related issues? What can be solution for this?

  #44 opened 7 years ago
  1

• Change Request: Add clear() to MAX30100_PulseOximeter.h

  #43 opened 6 years ago
  4

• Node MCU and max30100

  #42 opened 7 years ago
  16

• Using two MAX30100 together in one Arduino

  #41 opened 7 years ago
  2

• Temperature Measurement

  #40 opened 7 years ago
  1

• rcwl 0530

  #39 opened 7 years ago
  0

• error could not convert from 'void' to 'bool'

  #38 opened 7 years ago
  5

• Rolling graph compile error

  #37 opened 7 years ago
  1

• i will ask if this result is right

  #36 opened 7 years ago
  2

• Compiling in Arduino IDE

  #35 opened 7 years ago
  4

• Initializing pulse oximeter..FAILED in my serial port my wiring to UNO is this VIN=>V5, SCL(pullup4.7k)=>SCL, SDA(pullup4.7k)=>SDA,

  #34 opened 7 years ago
  1

• Arduino Nano+MAX30100

  #33 opened 7 years ago
  11

• Getting strange pulses each 2 seconds

  #32 opened 7 years ago
  4

• could not convert 'sensor.MAX30100::begin((pulseWidth)3u, (ledCurrent)14u, (sampleRate)1u)' from 'void' to 'bool'

  #31 opened 7 years ago
  1

• only until the initialization can not be a failed or successful message

  #30 opened 7 years ago
  4

• Wrong values

  #29 opened 7 years ago
  11

• Zero Output at MAX30100_RawData and MAX30100_Minimal

  #28 opened 7 years ago
  15

• Stuck at "MAX30100 Initializing.."

  #27 opened 7 years ago
  8

• Issue with Wemos D1 mini and MAX30100

  #26 opened 7 years ago
  2

• I2C error

  #25 opened 7 years ago
  1

• Wiring for NodeMCU-esp8266

  #24 opened 7 years ago
  14

• Failed Initialization Test: Wrong Part ID

  #23 opened 7 years ago
  7

• I2c error in tester

  #22 opened 7 years ago
  18

• IoT Confusion

  #21 opened 7 years ago
  11

• Wrong data

  #19 opened 7 years ago
  12

• Is there any way to enter sleep mode?

  #18 opened 7 years ago
  4

• Arduino-MAX30100

  #17 opened 8 years ago
  2

• Sensor doesn't work properly :/

  #16 opened 8 years ago
  7

• any workaround for raspberry pi 3

  #15 opened 8 years ago
  1

• Missing beats!

  #14 opened 8 years ago
  16

• Arduino+MAX30100(RCWL-0530) Unable to begin MAX30100

  #13 opened 8 years ago
  81

• [Arduino+ MAX30100 (rcwl 0530) ] zeros when extracting SpO2 level and BPM

  #12 opened 8 years ago
  8

• get raw/filtered sensor value

  #11 opened 8 years ago
  3

• I2C address

  #10 opened 8 years ago
  3

• Extracting Temperature from the MAX30100

  #9 opened 8 years ago
  2

• Getting a rolling graph

  #8 opened 8 years ago
  4

• About the data reading

  #7 opened 8 years ago
  2

• hello i want to ask you why my chip cannt work

  #6 opened 8 years ago
  3

• SPO2 Detection in other areas of the body

  #5 opened 8 years ago
  1

• Undefined reference

  #4 opened 8 years ago
  5

• MAX30100 and BLE Nano

  #3 opened 8 years ago
  3

• Thanks!

  #2 opened 8 years ago
  1

• Thanks for the amazing code!

  #1 opened 8 years ago
  2