pabigot/bsp430

Issues

• switch to C99 inline standard

  #79 opened 10 years ago by pabigot
  0

• reduce _ni use in timers/clocks

  #78 opened 10 years ago by pabigot
  0

• standardize unused peripheral pins

  #72 opened 10 years ago by pabigot
  1

• Revise resource management to improve responsiveness

  #62 opened 10 years ago by pabigot
  1

• consider LOCKLPM5 support

  #77 opened 10 years ago by pabigot
  1

• cli should prefer exact match

  #76 opened 11 years ago by pabigot
  1

• remove unnecessary @def annotations

  #64 opened 11 years ago by pabigot
  0

• correct misuse of underscore in identifiers

  #71 opened 11 years ago by pabigot
  0

• ensure REN cleared on peripheral pins

  #73 opened 11 years ago by pabigot
  0

• add API for port SEL control

  #75 opened 11 years ago by pabigot
  0

• add API for port REN control

  #74 opened 11 years ago by pabigot
  0

• review oscillator fault code

  #70 opened 11 years ago by pabigot
  0

• fix dma handle

  #68 opened 11 years ago by pabigot
  1

• support Vcc increase for clock rate

  #65 opened 11 years ago by pabigot
  0

• support RF GPIO timer HAL requests

  #66 opened 11 years ago by pabigot
  0

• avoid deadlock in escaped input sequences

  #69 opened 11 years ago by pabigot
  0

• clean up alarms at times near now and in past

  #67 opened 11 years ago by pabigot
  0

• missing BSP430_HAL_ISR_CALLBACK_DISABLE_INTERRUPT from timer + port

  #63 opened 11 years ago by pabigot
  0

• Access to peripheral function port assignments

  #37 opened 12 years ago by pabigot
  0

• vBSP430lpmConfigurePortsForLPM_ni corrupts initial console output

  #39 opened 12 years ago by pabigot
  1

• 4xx family EUI64 does not work

  #47 opened 12 years ago by pabigot
  0

• review Makefile for mis-use of hook-equals

  #61 opened 11 years ago by pabigot
  1

• fix flush issue with I2C

  #59 opened 11 years ago by pabigot
  0

• fix reset issue with I2C

  #60 opened 11 years ago by pabigot
  0

• Add lighter-weight serial reset

  #57 opened 11 years ago by pabigot
  0

• remove unnecessary RF interfaces

  #58 opened 11 years ago by pabigot
  0

• Improve I2C diagnostics

  #56 opened 11 years ago by pabigot
  0

• rf2500t issues with I2C devices

  #55 opened 11 years ago by pabigot
  0

• MEMORY_MODEL missed in LDFLAGS

  #53 opened 12 years ago by pabigot
  0

• cli utility incompatible with far code

  #54 opened 12 years ago by pabigot
  0

• review typedef struct for consistency

  #45 opened 12 years ago by pabigot
  0

• usci5 mis-configures pins in UART mode

  #50 opened 12 years ago by pabigot
  0

• add M25P generic interface

  #49 opened 12 years ago by pabigot
  0

• support on-board LCDs

  #51 opened 12 years ago by pabigot
  0

• query and set serial clock rates

  #52 opened 12 years ago by pabigot
  0

• port interrupts broken in 20130325

  #48 opened 12 years ago by pabigot
  0

• Add support for reading LED state

  #40 opened 12 years ago by pabigot
  0

• support setting timer counters

  #41 opened 12 years ago by pabigot
  0

• add EUI support

  #42 opened 12 years ago by pabigot
  2

• work around CPU42

  #44 opened 12 years ago by pabigot
  0

• fix CS_A distinction for new TI headers

  #46 opened 12 years ago by pabigot
  0

• provide reliable read of asynchronous timer counters

  #31 opened 12 years ago by pabigot
  0

• Need safe version of xBSP430uptimeAsText_ni

  #32 opened 12 years ago by pabigot
  0

• cli functions disable interrupts

  #33 opened 12 years ago by pabigot
  0

• UCS improperly sets SCG0 when trimming

  #34 opened 12 years ago by pabigot
  0

• support safe and unsafe read of timers

  #38 opened 12 years ago by pabigot
  0

• Catch issues with LPM_EXIT_CLEAR_GIE and normal operation

  #35 opened 12 years ago by pabigot
  0

• Configure I2C and SPI clocks by Hz

  #36 opened 12 years ago by pabigot
  0

• Allow control of SMCLK sources

  #30 opened 12 years ago by pabigot
  0

• Bootloader & ldscript

  #43 opened 12 years ago by hodiapa
  1