Solarman integration

This is a Home Assistant component for interacting with Solarman data collectors used with a variety of inverters. The integration allows Home Assistant to connect in direct-mode over the local network to the collector to extract the information, and no cables are required.

It has been tested with a 5kW DEYE/SUNSYNK inverter. The collector is reported to be used in Omnik, Hosola, Goodwe, Solax, Ginlong, Samil, Sofar and Power-One Solar inverters, you may get success from any of these as well.

This component uses version 5 of the communication protocol. If your collector is older and this component does not work, try the following integration which is similar, but uses version 4 of the protocol:

https://github.com/heinoldenhuis/home_assistant_omnik_solar

Installation

HACS

This method is prefered.

Manual

For this, it is highly recomended to use the "Samba share" add-on (you will need to enable advanced mode in your user profile).

Clone or download the repo, and copy the "solarman" folder in "custom_components" to the "custom_components" folder in home assistant.

After that, the folder structure should look as follows:

custom_components
├── solarman
│   ├── __init__.py
│   ├── const.py
│   ├── manifest.json
│   ├── parameters.yaml
│   ├── parser.py
│   ├── solarman.py
│   └── sensor.py
├── {other components}

Then proceed to configuration.

Configuration

Get the IP and Serial Number to use in the configuration.

Find the internal IP of the logger on the DHCP server, and then open a browser and navigate to that address. If you are prompted for a username/password, use "admin" as username and "admin" as password.

Once logged in, expand the "Device information" and note the Device serial number, as well as the IP used.

Check the version of the solarman logger. If the serial number starts with 17xxxxxxx or 21xxxxxxx (protocol V5), the component should work. If not, you may need to try the component for V4 of the protocol mentioned above.
On your DHCP server, reserve the IP for the WiFi data logger so that it will not change.
In your configuration.yaml file, add the solarman platform under "sensor"

Example:

sensor:
  - platform: solarman
    name: DEYE 
    inverter_host: 192.168.0.100
    inverter_port: 8899
    inverter_serial: 1720747149 
    scan_interval: 30
    lookup_file: sofar_lsw3.yaml

Parameters

Parameter	Description
name	This name will be prefixed to all parameter values (change as you like)
inverter_host	The IP address of the data logger
inverter_port	Always 8899
inverter_serial	The serial number of the data collector
scan_interval	Time in seconds between refresh intervals
lookup_file	** The yaml file to use for parameter-definition

** This parameter is optional, and if not specified will revert to parameters.yaml. If you customize the parameters, create a lookup file "customize.yaml" and refer to it so that it will not be overwritten during updates.

Lookup Files

Lookup File	Inverters supported	Notes
parameters.yaml	DEYE/Sunsynk/SolArk Hybrid inverters	used when no lookup specified
deye_string.yaml	DEYE/Sunsynk/SolArk String inverters	eg. SUN-4/5/6/7/8/10/12K-G03 Plus
sofar_lsw3.yaml	SOFAR Inverters

Entities

Once the component is running, it will add the following entities to Home Assistant

Status Entities

Apart from the inverter-parameters, it will also add status entities to view the status of the solarman component.

Energy Dashboard

The entities includes the device classes to enable it to be added to the Energy Dashboard introduced with Home Assistant Core 2021.8.

To configure the energy dashboard with the infirmation provided by this component, see configuring energy dashboard

Customization

This integration was tested agains the DEYE 5kW inverter, and it is possible that the parameter-definitions for other inverters may differ. If you want to try your hand at it, refer to customizing parameters.yaml

pablolite/home_assistant_solarman