JARVIS-TriggerFirmware

Quick Upload instructions

Linux

Clone the repository with:

git clone --recursive https://github.com/JARVIS-MoCap/JARVIS-TriggerFirmware.git

Make sure you are in the JARVIS-TriggerFirmware Directory and run: sh install_arduino_uno.sh

Windows

Make sure you have a recent version of Python installed. You can either get it directly from the Microsoft Store or download it from here.

Clone the repository with:

git clone --recursive https://github.com/JARVIS-MoCap/JARVIS-TriggerFirmware.git

Make sure you are in the JARVIS-TriggerFirmware Directory and run:
```
.\install_arduino_uno.bat
```
If the install throws an error related to Long Path Support first remove the JARVIS-TriggerFirmware\PlatformIO\install directory and then open a command prompt as administrator and run:
```
reg add "HKLM\SYSTEM\CurrentControlSet\Control\FileSystem" /v LongPathsEnabled /t REG_DWORD /d 1
```

Raspberry Pi Pico:

If you encounter a error regarding missing libhidapi-hidraw0 install it with:

 sudo apt install -y libhidapi-hidraw0

Contact

JARVIS was developed at the Neurobiology Lab of the German Primate Center (DPZ). If you have any questions or other inquiries related to JARVIS please contact: