The LinuxServer.io team brings you another container release featuring:

regular and timely application updates
easy user mappings (PGID, PUID)
custom base image with s6 overlay
weekly base OS updates with common layers across the entire LinuxServer.io ecosystem to minimise space usage, down time and bandwidth
regular security updates

Find us at:

Blog - all the things you can do with our containers including How-To guides, opinions and much more!
Discord - realtime support / chat with the community and the team.
Discourse - post on our community forum.
Fleet - an online web interface which displays all of our maintained images.
GitHub - view the source for all of our repositories.
Open Collective - please consider helping us by either donating or contributing to our budget

linuxserver/nextcloud

Nextcloud gives you access to all your files wherever you are.

Where are your photos and documents? With Nextcloud you pick a server of your choice, at home, in a data center or at a provider. And that is where your files will be. Nextcloud runs on that server, protecting your data and giving you access from your desktop or mobile devices. Through Nextcloud you also access, sync and share your existing data on that FTP drive at the office, a Dropbox or a NAS you have at home.

Supported Architectures

We utilise the docker manifest for multi-platform awareness. More information is available from docker here and our announcement here.

Simply pulling lscr.io/linuxserver/nextcloud:latest should retrieve the correct image for your arch, but you can also pull specific arch images via tags.

The architectures supported by this image are:

Architecture	Available	Tag
x86-64	✅	amd64-<version tag>
arm64	✅	arm64v8-<version tag>
armhf	✅	arm32v7-<version tag>

Version Tags

This image provides various versions that are available via tags. Please read the descriptions carefully and exercise caution when using unstable or development tags.

Tag	Available	Description
latest	✅	Stable Nextcloud releases

Application Setup

Access the webui at https://<your-ip>:443, for more information check out Nextcloud.

Docker image update and recreation of container alone won't update nextcloud version.

In order to update nextcloud version, you have two options, firstly make sure you are using the latest docker image,then either

Perform the in app gui update.
Use the CLI version by running docker exec -it nextcloud updater.phar (Both of these are described here)

Note: Both occ and updater.phar can be run without prepending with sudo -u abc php or sudo -u www-data php

If you are not customizing our default nginx configuration you will need to remove the file:

/config/nginx/site-confs/default.conf

Then restart the container to replace it with the latest one.

Collaborative Editing

Nextcloud's built-in collaborative editing packages (Collabora/CODE and OnlyOffice) only work on x86_64 systems with glibc, and therefore they are not compatible with our images. You should create separate containers for them and set them up in Nextcloud with their respective connector addons.

If (auto) installed, those built-in packages may cause instability and should be removed.

Usage

Here are some example snippets to help you get started creating a container.

docker-compose (recommended, click here for more info)

---
version: "2.1"
services:
  nextcloud:
    image: lscr.io/linuxserver/nextcloud:latest
    container_name: nextcloud
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=Europe/London
    volumes:
      - /path/to/appdata:/config
      - /path/to/data:/data
    ports:
      - 443:443
    restart: unless-stopped

docker cli (click here for more info)

docker run -d \
  --name=nextcloud \
  -e PUID=1000 \
  -e PGID=1000 \
  -e TZ=Europe/London \
  -p 443:443 \
  -v /path/to/appdata:/config \
  -v /path/to/data:/data \
  --restart unless-stopped \
  lscr.io/linuxserver/nextcloud:latest

Parameters

Container images are configured using parameters passed at runtime (such as those above). These parameters are separated by a colon and indicate <external>:<internal> respectively. For example, -p 8080:80 would expose port 80 from inside the container to be accessible from the host's IP on port 8080 outside the container.

Parameter	Function
`-p 443`	WebUI
`-e PUID=1000`	for UserID - see below for explanation
`-e PGID=1000`	for GroupID - see below for explanation
`-e TZ=Europe/London`	Specify a timezone to use EG Europe/London.
`-v /config`	Nextcloud configs.
`-v /data`	Your personal data.

Environment variables from files (Docker secrets)

You can set any environment variable from a file by using a special prepend FILE__.

As an example:

-e FILE__PASSWORD=/run/secrets/mysecretpassword

Will set the environment variable PASSWORD based on the contents of the /run/secrets/mysecretpassword file.

Umask for running applications

For all of our images we provide the ability to override the default umask settings for services started within the containers using the optional -e UMASK=022 setting. Keep in mind umask is not chmod it subtracts from permissions based on it's value it does not add. Please read up here before asking for support.

User / Group Identifiers

When using volumes (-v flags) permissions issues can arise between the host OS and the container, we avoid this issue by allowing you to specify the user PUID and group PGID.

Ensure any volume directories on the host are owned by the same user you specify and any permissions issues will vanish like magic.

In this instance PUID=1000 and PGID=1000, to find yours use id user as below:

  $ id username
    uid=1000(dockeruser) gid=1000(dockergroup) groups=1000(dockergroup)

Docker Mods

We publish various Docker Mods to enable additional functionality within the containers. The list of Mods available for this image (if any) as well as universal mods that can be applied to any one of our images can be accessed via the dynamic badges above.

Support Info

Shell access whilst the container is running: docker exec -it nextcloud /bin/bash
To monitor the logs of the container in realtime: docker logs -f nextcloud
container version number
- docker inspect -f '{{ index .Config.Labels "build_version" }}' nextcloud
image version number
- docker inspect -f '{{ index .Config.Labels "build_version" }}' lscr.io/linuxserver/nextcloud:latest

Updating Info

Most of our images are static, versioned, and require an image update and container recreation to update the app inside. With some exceptions (ie. nextcloud, plex), we do not recommend or support updating apps inside the container. Please consult the Application Setup section above to see if it is recommended for the image.

Below are the instructions for updating containers:

Via Docker Compose

Update all images: docker-compose pull
- or update a single image: docker-compose pull nextcloud
Let compose update all containers as necessary: docker-compose up -d
- or update a single container: docker-compose up -d nextcloud
You can also remove the old dangling images: docker image prune

Via Docker Run

Update the image: docker pull lscr.io/linuxserver/nextcloud:latest
Stop the running container: docker stop nextcloud
Delete the container: docker rm nextcloud
Recreate a new container with the same docker run parameters as instructed above (if mapped correctly to a host folder, your /config folder and settings will be preserved)
You can also remove the old dangling images: docker image prune

Via Watchtower auto-updater (only use if you don't remember the original parameters)

Pull the latest image at its tag and replace it with the same env variables in one run:

docker run --rm \
-v /var/run/docker.sock:/var/run/docker.sock \
containrrr/watchtower \
--run-once nextcloud

You can also remove the old dangling images: docker image prune

Note: We do not endorse the use of Watchtower as a solution to automated updates of existing Docker containers. In fact we generally discourage automated updates. However, this is a useful tool for one-time manual updates of containers where you have forgotten the original parameters. In the long term, we highly recommend using Docker Compose.

Image Update Notifications - Diun (Docker Image Update Notifier)

We recommend Diun for update notifications. Other tools that automatically update containers unattended are not recommended or supported.

Building locally

If you want to make local modifications to these images for development purposes or just to customize the logic:

git clone https://github.com/linuxserver/docker-nextcloud.git
cd docker-nextcloud
docker build \
  --no-cache \
  --pull \
  -t lscr.io/linuxserver/nextcloud:latest .

The ARM variants can be built on x86_64 hardware using multiarch/qemu-user-static

docker run --rm --privileged multiarch/qemu-user-static:register --reset

Once registered you can define the dockerfile to use with -f Dockerfile.aarch64.

Versions

10.10.22: - Rebasing to alpine 3.15 with php8. Restructure nginx configs (see changes announcement).
30.09.22: - Disabled output_buffering as per [nextcloud docs](https://docs.nextcloud.com/server/latest/admin_manual/configuration_files/big_file_upload_configuration.html
21.05.22: - Update version check endpoint.
28.04.22: - Increase OPCache interned strings buffered setting to 16.
14.04.22: - Nginx default site config updated for v23 (existing users should delete /config/nginx/site-confs/default.conf and restart the container). Fix LDAP connection.
11.09.21: - Rebasing to alpine 3.14
21.03.21: - Publish php8 tag for testing.
25.02.21: - Nginx default site config updated for v21 (existing users should delete /config/nginx/site-confs/default.conf and restart the container).
21.01.21: - Fix php iconv (was breaking the mail addon). If installed, attempt to remove broken CODE Server app during startup.
20.01.21: - Increase php fcgi timeout to prevent 504 Gateway timeout errors (existing users should delete /config/nginx/site-confs/default.conf and restart the container).
16.01.21: - Rebasing to alpine 3.13. Users with issues on 32-bit arm, see this article.
12.08.20: - Various updates to default site config, including added support for webfinger (existing users should delete /config/nginx/site-confs/default.conf and restart the container).
03.06.20: - Rebasing to alpine 3.12
03.06.20: - Add php7-bcmath and php7-fileinfo
31.05.20: - Add aliases for occ and updater.phar
31.03.20: - Allow crontab to be user customized, fix logrotate.
17.01.20: - Updated php.ini defaults and site config, including an optional HSTS directive (existing users should delete /config/nginx/site-confs/default.conf and restart the container).
19.12.19: - Rebasing to alpine 3.11.
18.11.19: - Nginx default site config updated for v17 (existing users should delete /config/nginx/site-confs/default.conf and restart the container).
28.10.19: - Change cronjob to run every 5 minutes.
24.10.19: - Nginx default site config updated due to CVE-2019-11043 (existing users should delete /config/nginx/site-confs/default.conf and restart the container).
14.07.19: - Download nextcloud during build time.
28.06.19: - Rebasing to alpine 3.10.
23.03.19: - Switching to new Base images, shift to arm32v7 tag.
27.02.19: - Updating base nginx config to sync up with v15 requirements.
22.02.19: - Rebasing to alpine 3.9.
28.01.19: - Add pipeline logic and multi arch.
25.01.19: - Add php7-phar for occ upgrades.
05.09.18: - Rebase to alpine 3.8.
11.06.18: - Use latest rather than specific version for initial install.
26.04.18: - Bump default install to 13.0.1.
06.02.18: - Bump default install to 13.0.0.
26.01.18: - Rebase to alpine 3.7, bump default install to 12.0.5.
12.12.17: - Bump default install to 12.0.4, fix continuation lines.
15.10.17: - Sed php.ini for opcache requirements in newer nextcloud versions.
20.09.17: - Bump default install to 12.0.3.
19.08.17: - Bump default install to 12.0.2.
25.05.17: - Rebase to alpine 3.6.
22.05.17: - Update to nextcloud 12.0, adding required dependecies and note about commenting out SAMEORIGIN; line.
03.05.17: - Use community repo of memcache.
07.03.17: - Release into main repository and upgrade to php7 and Alpine 3.5.

pagdot/docker-nextcloud