gitops-istio
This guide walks you through setting up Istio on a Kubernetes cluster and automating canary deployments with GitOps pipelines.
Components:
- Istio service mesh
- manages the traffic flows between microservices, enforcing access policies and aggregating telemetry data
- Prometheus monitoring system
- time series database that collects and stores the service mesh metrics
- Flux GitOps operator
- syncs YAMLs and Helm charts between git and clusters
- scans container registries and deploys new images
- Helm Operator CRD controller
- automates Helm chart releases
- Flagger progressive delivery operator
- automates the promotion of canary deployments using Istio routing for traffic shifting and Prometheus metrics for canary analysis
Prerequisites
You'll need a Kubernetes cluster v1.11 or newer with LoadBalancer
support,
MutatingAdmissionWebhook
and ValidatingAdmissionWebhook
admission controllers enabled.
For testing purposes you can use Minikube with two CPUs and 4GB of memory.
Install Flux CLI, Helm and Tiller:
brew install fluxctl kubernetes-helm
kubectl -n kube-system create sa tiller
kubectl create clusterrolebinding tiller-cluster-rule \
--clusterrole=cluster-admin \
--serviceaccount=kube-system:tiller
helm init --service-account tiller --wait
Fork this repository and clone it:
git clone https://github.com/<YOUR-USERNAME>/gitops-istio
cd gitops-istio
Cluster bootstrap
Install Weave Flux and its Helm Operator by specifying your fork URL:
./scripts/flux-init.sh git@github.com:<YOUR-USERNAME>/gitops-istio
At startup, Flux generates a SSH key and logs the public key. The above command will print the public key.
In order to sync your cluster state with git you need to copy the public key and create a deploy key with write access on your GitHub repository. On GitHub go to Settings > Deploy keys click on Add deploy key, check Allow write access, paste the Flux public key and click Add key.
When Flux has write access to your repository it will do the following:
- creates the
istio-system
andprod
namespaces - creates the Istio CRDs
- installs Istio Helm Release
- installs Flagger Helm Release
- installs Flagger's Grafana Helm Release
- creates the load tester deployment
- creates the frontend deployment and canary
- creates the backend deployment and canary
- creates the Istio public gateway
The Flux Helm operator provides an extension to Weave Flux that automates Helm Chart releases for it. A Chart release is described through a Kubernetes custom resource named HelmRelease. The Flux daemon synchronizes these resources from git to the cluster, and the Flux Helm operator makes sure Helm charts are released as specified in the resources.
Istio Helm Release example:
apiVersion: flux.weave.works/v1beta1
kind: HelmRelease
metadata:
name: istio
namespace: istio-system
spec:
releaseName: istio
chart:
repository: https://storage.googleapis.com/istio-release/releases/1.1.4/charts
name: istio
version: 1.1.4
values:
pilot:
enabled: true
gateways:
enabled: true
istio-ingressgateway:
type: LoadBalancer
sidecarInjectorWebhook:
enabled: true
mixer:
policy:
enabled: false
telemetry:
enabled: true
prometheus:
enabled: true
scrapeInterval: 5s
Note that the Istio CRDs have been extracted from the istio-init chart and placed inside the istio-system dir.
You can update the CRDs by running the ./scripts/istio-init.sh
script.
If you make changes to the Istio configuration and push those to git, Flux will upgrade the Helm release.
It can take up to 3 minutes for Flux to sync and apply the changes or you can use fluxctl sync
to trigger a git sync.
Workloads bootstrap
When Flux syncs the Git repository with your cluster, it creates the frontend/backend deployment, HPA and a canary object. Flagger uses the canary definition to create a series of objects: Kubernetes deployments, ClusterIP services and Istio virtual services. These objects expose the application on the mesh and drive the canary analysis and promotion.
# applied by Flux
deployment.apps/frontend
horizontalpodautoscaler.autoscaling/frontend
canary.flagger.app/frontend
# generated by Flagger
deployment.apps/frontend-primary
horizontalpodautoscaler.autoscaling/frontend-primary
service/frontend
service/frontend-canary
service/frontend-primary
virtualservice.networking.istio.io/frontend
Check if Flagger has successfully initialized the canaries:
kubectl -n prod get canaries
NAME STATUS WEIGHT LASTTRANSITIONTIME
backend Initialized 0 2019-04-30T18:53:18Z
frontend Initialized 0 2019-04-30T17:50:50Z
When the frontend-primary
deployment comes online,
Flagger will route all traffic to the primary pods and scale to zero the frontend
deployment.
Automated canary promotion
Flagger implements a control loop that gradually shifts traffic to the canary while measuring key performance indicators like HTTP requests success rate, requests average duration and pod health. Based on analysis of the KPIs a canary is promoted or aborted, and the analysis result is published to Slack.
A canary deployment is triggered by changes in any of the following objects:
- Deployment PodSpec (container image, command, ports, env, etc)
- ConfigMaps mounted as volumes or mapped to environment variables
- Secrets mounted as volumes or mapped to environment variables
For workloads that are not receiving constant traffic Flagger can be configured with a webhook,
that when called, will start a load test for the target workload. The backend load test webhook configuration can be found
at prod/backend/canary.yaml
.
Trigger a canary deployment for the backend app by updating the container image:
$ export FLUX_FORWARD_NAMESPACE=flux
$ fluxctl release --workload=prod:deployment/backend \
--update-image=quay.io/stefanprodan/podinfo:1.4.1
Submitting release ...
WORKLOAD STATUS UPDATES
prod:deployment/backend success backend: quay.io/stefanprodan/podinfo:1.4.0 -> 1.4.1
Commit pushed: ccb4ae7
Commit applied: ccb4ae7
Flagger detects that the deployment revision changed and starts a new rollout:
$ kubectl -n prod describe canary backend
Events:
New revision detected! Scaling up backend.prod
Starting canary analysis for backend.prod
Advance backend.prod canary weight 5
Advance backend.prod canary weight 10
Advance backend.prod canary weight 15
Advance backend.prod canary weight 20
Advance backend.prod canary weight 25
Advance backend.prod canary weight 30
Advance backend.prod canary weight 35
Advance backend.prod canary weight 40
Advance backend.prod canary weight 45
Advance backend.prod canary weight 50
Copying backend.prod template spec to backend-primary.prod
Promotion completed! Scaling down backend.prod
During the analysis the canary’s progress can be monitored with Grafana. You can access Grafana using port forwarding:
kubectl -n istio-system port-forward svc/flagger-grafana 3000:80
The Istio dashboard URL is http://localhost:3000/d/flagger-istio/istio-canary?refresh=10s&orgId=1&var-namespace=prod&var-primary=backend-primary&var-canary=backend
Note that if new changes are applied to the deployment during the canary analysis, Flagger will restart the analysis phase.
Automated A/B testing
Besides weighted routing, Flagger can be configured to route traffic to the canary based on HTTP match conditions. In an A/B testing scenario, you'll be using HTTP headers or cookies to target a certain segment of your users. This is particularly useful for frontend applications that require session affinity.
You can enable A/B testing by specifying the HTTP match conditions and the number of iterations:
canaryAnalysis:
# schedule interval (default 60s)
interval: 10s
# max number of failed metric checks before rollback
threshold: 10
# total number of iterations
iterations: 12
# canary match condition
match:
- headers:
user-agent:
regex: "^(?!.*Chrome)(?=.*\bSafari\b).*$"
- headers:
cookie:
regex: "^(.*?;)?(type=insider)(;.*)?$"
The above configuration will run an analysis for two minutes targeting Safari users and those that
have an insider cookie. The frontend configuration can be found at prod/frontend/canary.yaml
.
Trigger a deployment by updating the frontend container image:
$ fluxctl release --workload=prod:deployment/frontend \
--update-image=quay.io/stefanprodan/podinfo:1.4.1
Flagger detects that the deployment revision changed and starts the A/B testing:
$ kubectl -n istio-system logs deploy/flagger -f | jq .msg
New revision detected! Scaling up frontend.prod
Waiting for frontend.prod rollout to finish: 0 of 1 updated replicas are available
Advance frontend.prod canary iteration 1/10
Advance frontend.prod canary iteration 2/10
Advance frontend.prod canary iteration 3/10
Advance frontend.prod canary iteration 4/10
Advance frontend.prod canary iteration 5/10
Advance frontend.prod canary iteration 6/10
Advance frontend.prod canary iteration 7/10
Advance frontend.prod canary iteration 8/10
Advance frontend.prod canary iteration 9/10
Advance frontend.prod canary iteration 10/10
Copying frontend.prod template spec to frontend-primary.prod
Waiting for frontend-primary.prod rollout to finish: 1 of 2 updated replicas are available
Promotion completed! Scaling down frontend.prod
You can monitor all canaries with:
$ watch kubectl get canaries --all-namespaces
NAMESPACE NAME STATUS WEIGHT LASTTRANSITIONTIME
prod frontend Progressing 100 2019-04-30T18:15:07Z
prod backend Succeeded 0 2019-04-30T17:05:07Z
Automated rollback
During the canary analysis you can generate HTTP 500 errors and high latency to test Flagger's rollback.
Generate HTTP 500 errors:
watch curl -b 'type=insider' http://<INGRESS-IP>/status/500
Generate latency:
watch curl -b 'type=insider' http://<INGRESS-IP>/delay/1
When the number of failed checks reaches the canary analysis threshold, the traffic is routed back to the primary, the canary is scaled to zero and the rollout is marked as failed.
kubectl -n prod describe canary/frontend
Status:
Failed Checks: 2
Phase: Failed
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Synced 3m flagger Starting canary deployment for frontend.prod
Normal Synced 3m flagger Advance frontend.prod canary iteration 1/10
Normal Synced 3m flagger Advance frontend.prod canary iteration 2/10
Normal Synced 3m flagger Advance frontend.prod canary iteration 3/10
Normal Synced 3m flagger Halt frontend.prod advancement success rate 69.17% < 99%
Normal Synced 2m flagger Halt frontend.prod advancement success rate 61.39% < 99%
Warning Synced 2m flagger Rolling back frontend.prod failed checks threshold reached 2
Warning Synced 1m flagger Canary failed! Scaling down frontend.prod
Alerting
Flagger can be configured to send Slack notifications. You can enable alerting by adding the Slack settings to Flagger's Helm Release:
apiVersion: flux.weave.works/v1beta1
kind: HelmRelease
metadata:
name: flagger
namespace: istio-system
annotations:
flux.weave.works/automated: "false"
flux.weave.works/tag.chart-image: semver:~0
spec:
releaseName: flagger
chart:
repository: https://flagger.app
name: flagger
version: 0.12.0
values:
slack:
user: flagger
channel: general
url: https://hooks.slack.com/services/YOUR/SLACK/WEBHOOK
Once configured with a Slack incoming webhook, Flagger will post messages when a canary deployment has been initialised, when a new revision has been detected and if the canary analysis failed or succeeded.
A canary deployment will be rolled back if the progress deadline exceeded or if the analysis reached the maximum number of failed checks:
Besides Slack, you can use Alertmanager to trigger alerts when a canary deployment failed:
- alert: canary_rollback
expr: flagger_canary_status > 1
for: 1m
labels:
severity: warning
annotations:
summary: "Canary failed"
description: "Workload {{ $labels.name }} namespace {{ $labels.namespace }}"