/Archlinux_Framework13AMD_FullEncryption_TMP2.0_Xfce4

This repository contain my notes and file for helpme the in installation of Arch linux in my Framework 13 AMD 7040 whit Full-Disk Encryption and TMP2.0

Primary LanguageShellGNU General Public License v3.0GPL-3.0

Arch linux + Framework 13 AMD 7040 + Full-Disk Encryption + TMP2.0 + Xfce4

Hardware

  • Framework 13
  • AMD Ryzen 7 AMD Ryzen 7 7840
  • 16GB RAM
  • 1Tb SSD

Preparation

Boot up Arch Linux ISO and do the following:

  • Device connected by ethernet interface

Configuration file

All configuration file modified are in src folder

Boot by usb stick

Load keyboard map

loadkeys it

Check connectivity

ip addr

the command should return

2: enp195s0f3u1u4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    inet 192.168.XXX.XXX/24 brd 192.168.12.255 scope global dynamic noprefixroute enp195s0f3u1u4
       valid_lft 86395sec preferred_lft 86395sec
	   ...

ping archlinux.org

Disk partitioning

I keep /home dir in separate partition and i would like set the disk like this:
1 EFI 512Mb
2 / 100Gb
3 /home 850Gb

fdisk /dev/nvme0n1

With the following sequence of characters we will obtain the desired partitioning (I assume the disk has 512 byte sectors):

  • Command: g
  • Command: n
  • Partition number:
  • First sector:
  • Last sector ...: 1046529
  • Command: t
  • Partition type or alias: 1 (set EFI type it's very important)
  • Command: n
  • Partition number:
  • First sector:
  • Last sector ...: 208664577
  • Command: n
  • Partition number:
  • First sector:
  • Last sector ...:
  • Command: p (check if all partition have a right dimensioning)
  • Command: w

Warning

The first partition must be EFI type

Format EFI partiton

mkfs.fat -F32 -n EFI /dev/vda1

Encrypt and format root partiton

cryptsetup luksFormat -h sha256 /dev/nvme0n1p2
or
cryptsetup luksFormat --type luks1 --use-random -S 1 -s 512 -h sha512 -i 5000 /dev/nvme0n1p2
cryptsetup luksHeaderBackup /dev/nvme0n1p2 --header-backup-file /root/system-header-backup.img
cryptsetup open /dev/nvme0n1p2 system
mkfs.ext4 -L system /dev/mapper/system

Encrypt and format home partiton

cryptsetup luksFormat -h sha256 /dev/nvme0n1p3
or
cryptsetup luksFormat --type luks1 --use-random -S 1 -s 512 -h sha512 -i 5000 /dev/nvme0n1p3
cryptsetup luksHeaderBackup /dev/nvme0n1p3 --header-backup-file /root/home-header-backup.img
cryptsetup open /dev/nvme0n1p3 home
mkfs.ext4 -L home /dev/mapper/home

Mount partitions

mount LABEL=system /mnt
mkdir /mnt/boot
mkdir /mnt/home
mount LABEL=EFI /mnt/boot
mount LABEL=home /mnt/home

Install system base

pacstrap /mnt base linux linux-firmware

Update mirror list

reflector -c it > /etc/pacman.d/mirrorlist

Populate fstab

genfstab -L /mnt >> /mnt/etc/fstab

Copy header of encrypted partitions

cp /root/system-header-backup.img /mnt/root
cp /root/home-header-backup.img /mnt/root

Chroot to new system

arch-chroot /mnt

Set localtime

ln -sf /usr/share/zoneinfo/Europe/Rome /etc/localtime

Set the RTC from the system time

hwclock --systohc

Uncomment desired locales

vim /etc/locale.gen

exaple uncomment: en_GB.UTF-8 UTF-8

Generate the locales

locale-gen

Set terminal keyboard map

vim /etc/vconsole.conf

exaple set: KEYMAP=it

Set hostname

vim /etc/hostname

exaple set: XXXX-linux

Set hosts

vim /etc/hosts

example set: 127.0.0.1 localhost 127.0.1.1 XXXX-linux.local XXXX-linux

Install and set networking

pacman -S wpa_supplicant networkmanager
systemctl enable NetworkManager dhcpcd

Install and set Midnight Commander

(Optional)

pacman -S mc
vim /etc/profile.d/editor.sh

set:
EDITOR=/usr/bin/mcedit

Configure HOOKS for initramfs

vim /etc/mkinitcpio.conf

insert the follow config:
HOOKS=(systemd autodetect modconf kms keyboard sd-vconsole block sd-encrypt filesystems resume fsck)

Warning

Maintain the right module sequengce

Install AMD microcode

pacman -S amd-ucode

Create initramfs

mkinitcpio -p linux

Install systemd-boot

bootctl install

Config systemd-boot loader

vim /boot/loader/loader.conf

insert the follow config:
default arch*.conf
timeout 5
editor yes
console-mode auto

Config systemd-boot deafult entry

vim /boot/loader/entries/arch.conf

insert the follow config:
title Arch Linux
linux /vmlinuz-linux
initrd /[CPU-ARCHITECTURE]-ucode.img
initrd /initramfs-linux.img
options rd.luks.name=</dev/disk/by-uuid>=system rd.luks.name=</dev/disk/by-uuid>=home root=/dev/mapper/system amdgpu.sg_display=0 acpi_osi="!Windows 2000" rw splash

Warning

Substitute this </dev/disk/by-uuid> with right uuid partition identifier

Config systemd-boot fallback entry

vim /boot/loader/entries/arch-fallback.conf

insert the follow config:
title Arch Linux
linux /vmlinuz-linux
initrd /-ucode.img
initrd /initramfs-linux.img
options rd.luks.name=</dev/disk/by-uuid>=system rd.luks.name=</dev/disk/by-uuid>=home root=/dev/mapper/system amdgpu.sg_display=0 acpi_osi="!Windows 2000" rw splash

Warning

Substitute this </dev/disk/by-uuid> with right uuid partition identifier

Set root passwd

passwd

Reboot system

exit
reboot

Boot from internal NVMe

Login with root user

Force keyboard mapp

If necessary set keyboard map

localectl set-keymap it

Update the date by ntp protocol at system boot

timedatectl set-ntp 1

Add user

useradd -m wheel -G johndoe
passwd johndoe

Install base services

pacman -S cronie apparmor avahi nss-mdns reflector sudo ntp logrotate

systemctl enable cronie  apparmor avahi-daemon reflector ntpd
systemctl start cronie  apparmor avahi-daemon reflector ntpd

Configure base services

Set DNS Multicast in Name Service Switch congihuration file

vim /etc/nsswitch.conf

Edit hosts key like this:
hosts: mymachines mdns_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] files myhostname dnsloadk

Add user to sudoers

vim /etc/sudoers.d/johndoe

Insert the follow row:
johndoe ALL=(ALL:ALL) ALL

vim /boot/loader/entries/arch.conf

Update the follow config:
options rd.luks.name=</dev/disk/by-uuid>=system rd.luks.name=</dev/disk/by-uuid>=home root=/dev/mapper/system amdgpu.sg_display=0 acpi_osi="!Windows 2000" lsm=landlock,lockdown,yama,integrity,apparmor,bpf rw splash

Warning

Substitute this </dev/disk/by-uuid> with right uuid partition identifier

vim /boot/loader/entries/arch-fallback.conf

Update the follow config:
options rd.luks.name=</dev/disk/by-uuid>=system rd.luks.name=</dev/disk/by-uuid>=home root=/dev/mapper/system amdgpu.sg_display=0 acpi_osi="!Windows 2000" lsm=landlock,lockdown,yama,integrity,apparmor,bpf rw splash

Warning

Substitute this </dev/disk/by-uuid> with right uuid partition identifier

Enable swap

touch /swap.img
chmod 600 /swap.img
dd if=/dev/zero of=/swap.img bs=1024k count=16000
mkswap /swap.img
swapon /swap.img

Update fstab

vim /etc/fstab

Append this:
/swap.img none swap defaults 0 0

systemctl daemon-reload

Optimize full ram utilization

vim  /etc/sysctl.d/swap.conf

Add: vm.swappiness=20

Set tpm2

Check if tpm2 has been detected

systemd-cryptenroll --tpm2-device=list

then

sudo systemd-cryptenroll --wipe-slot tpm2 --tpm2-device auto --tpm2-pcrs "1+7" /dev/nvme0n1p2
sudo systemd-cryptenroll --wipe-slot tpm2 --tpm2-device auto --tpm2-pcrs "1+7" /dev/nvme0n1p3

Enable Timeshift

(optional)

pacman -S timeshift

Attach external drive and create snapshot

timeshift --create --snapshot 'clean-distr' --snapshot-device /dev/sda1

Set suspension on low battery

vim /etc/udev/rules.d/99-lowbat.rules Add this:
#Suspend the system when battery level drop to 5% or lower
SUBSTYSTEM=="power_supply", ATTR{status}="Discharging", ATTR{capacity}="[0-5]", RUN="/run/bin/systemctl hibernate"

Install XFCE4

pacman --needed -S xorg-server xorg-xinit xterm xf86-video-amdgpu xfce4 xfce4-goodies xarchiver network-manager-applet lightdm lightdm-gtk-greeter alsa-utils pulseaudio pavucontrol dbus xdg-desktop-portal-xapp xdg-desktop-portal-gtk xdg-user-dirs xdg-dbus-proxy xdg-utils man-db man-pages catfish gvfs 
pacman -Rs xfburn xfce4-notes-plugin parole xfce4-dict

Configure LightDM

/etc/lightdm/lightdm.conf

Add under [Seat:*]
greeter-session=lightdm-gtk-greeter

Install Bluez

pacman -S bluez bluez-utils bluemanmanager  pulseaudio-bluetooth
systemctl start bluetooh.service
systemctl enable bluetooh.service

Install Cups

pacman -S cups cups-pdf
systemctl enable cups
systemctl start cups

Update finger reader device

You have to do this only one time if installed on your Framework 13 AMD a firmware older than 01000330

wget (https://archive.archlinux.org/packages/f/fwupd/fwupd-1.9.5-2-x86_64.pkg.tar.zst)
wget (https://github.com/FrameworkComputer/linux-docs/raw/main/goodix-moc-609c-v01000330.cab)
pacman -U fwupd-1.9.5-2-x86_64.pkg.tar.zst
fwupdtool install --allow-reinstall --allow-older goodix-moc-609c-v01000330.cab
fwupdtool get-history

This operation will return an error as reported in the link but eventually the firmware should be updated:
(https://knowledgebase.frame.work/en_us/updating-fingerprint-reader-firmware-on-linux-for-13th-gen-and-amd-ryzen-7040-series-laptops-HJrvxv_za)

reboot

Update login with fingerprint

vim /etc/pam.d/system-login
vim /etc/pam.d/xfce4-screensaver
vim /etc/pam.d/system-auth

Add this in the first position may must be placed after #%PAM-1.0:
...
auth sufficient pam_fprintd.so
...

Add developer base tools

pacman -S base-devel cmake git gdb
Secure boot

TODO

Configuration PPD

pacman -S power-profiles-daemon
systemctl start power-profiles-daemon.service
systemctl enable power-profiles-daemon.service

Install laptop feaures references

Framerowk configuration references

Arch Linux references

A big thank to Orhun

A big thank you to orhun who thanks to his guide gave me inspiration for this

Thanks to fix