patience4711/RPI-APS-inverters

Issues

• SD card almost full !

  #104 opened 7 months ago by defaliz
  2

• Questions about updates

  #105 opened 7 months ago by autourdupc
  2

• Possible to run on existing RPI ?

  #106 opened 8 months ago by sylvaing26
  3

• YC600 : inputs are swapped

  #100 opened 8 months ago by autourdupc
  84

• PI Zero 2 send a zigbeecommand via console not working

  #103 opened 8 months ago by patience4711
  0

• Issues connecting RPI-ECU with my Home Assistant

  #95 opened 9 months ago by TheRealCryss
  1

• No access at "menu"

  #102 opened 9 months ago by jmguilbert
  1

• YC600 with 1 solar pannel : No buttons for graphics

  #101 opened 9 months ago by autourdupc
  11

• RPI-ECU : No values returned from QS1

  #96 opened 9 months ago by autourdupc
  24

• Countdown to next polling cycle

  #99 opened 9 months ago by autourdupc
  2

• Timezone note working for manual value

  #97 opened 9 months ago by autourdupc
  2

• solution for system slowness

  #57 opened 10 months ago by patience4711
  0

• Strange things with only 1 panel..

  #92 opened 10 months ago by defaliz
  14

• dont start anymore after filesystem resize

  #91 opened a year ago by pvtex
  1

• I can't pair with the inverter

  #94 opened a year ago by TheRealCryss
  3

• Raspi not reachable but in my network with IP Adress

  #93 opened a year ago by TheRealCryss
  3

• install a new wireless interface

  #90 opened a year ago by defaliz
  2

• Feature request

  #89 opened a year ago by HackTheMac
  2

• How install from file and not sd card

  #87 opened a year ago by zasquash
  1

• Problems with HTTP Request

  #88 opened a year ago by HackTheMac
  3

• which firmware (out of 3) to choose

  #86 opened a year ago by supersjimmie
  3

• What does "inv 0 error 11 AF_DATA_CONFIRM fail" mean?

  #49 opened 2 years ago by peter33826
  2

• Firmware version of the inverter ?

  #70 opened 2 years ago by nlienard
  13

• DS3-H 3rd generation(2022), inverter is not working?

  #77 opened 2 years ago by b31k
  9

• change ip dhcp to static.. ??

  #79 opened 2 years ago by defaliz
  4

• utility of grafana server on rpiecu ?

  #78 opened 2 years ago by defaliz
  1

• Where are log for testing power reception signal ?

  #76 opened 2 years ago by defaliz
  5

• Any chance that it would work on ATmega256RFR2 ?

  #75 opened 2 years ago by leola
  1

• V 2_1 to V2_7 and more

  #74 opened 2 years ago by Chen32220
  1

• Would ZigBee USB Stick with coordinator firmware work?

  #73 opened 2 years ago by mi-hol
  3

• update firmware on DS3(L)

  #71 opened 2 years ago by nlienard
  3

• are my value OK with 2 solar panels ?

  #69 opened 2 years ago by defaliz
  2

• Possible to pair rpiecu in addition to ECU-B?

  #63 opened 2 years ago by AB-274
  3

• test zigee module

  #64 opened 2 years ago by defaliz
  2

• change some aps parameters ?

  #65 opened 2 years ago by defaliz
  2

• Feature Request - separate values for 2 modules

  #66 opened 2 years ago by peter33826
  1

• change IP and no protected menu

  #68 opened 2 years ago by defaliz
  3

• Crash of my RPI - how to recover ?

  #67 opened 2 years ago by nlienard
  8

• What are these inverter spikes?

  #61 opened 2 years ago by Cryss67
  2

• What does "inMessage = FE0164020067" mean?

  #60 opened 2 years ago by Cryss67
  4

• Version 3.3 no Totals / stats

  #59 opened 2 years ago by rasor89
  3

• SdCard link is not Working

  #58 opened 2 years ago by YoungCereal
  1

• Sources without burning RPi Image

  #52 opened 2 years ago by fellek
  4

• manual polling

  #54 opened 2 years ago by patience4711
  2

• having a new variable for totalen

  #53 opened 2 years ago by nlienard
  6

• Inverter restart resets daily energy

  #50 opened 2 years ago by rasor89
  18

• Bad value on DS3L -

  #48 opened 2 years ago by nlienard
  14

• Wiring issue ?

  #47 opened 2 years ago by nlienard
  2

• Is MQTT working proper?

  #46 opened 2 years ago by rasor89
  3

• Wrong Value DS3 2

  #45 opened 2 years ago by peter33826
  4