patrykk/linux-udoo

Issues

• fec 2188000.ethernet eth0: MDIO read timeout

  #23 opened 9 years ago by patrykk
  1

• LVDS 15inch (only backlight)

  #22 opened 9 years ago by gondorf
  62

• No wireless device

  #24 opened 8 years ago by ocurero
  6

• Buggy GCC SRA optimization should be disabled

  #21 opened 9 years ago by chrta
  4

• Could not load galcore kernel module

  #20 opened 9 years ago by chrta
  4

• NULL pointer dereference in fec_enet_open

  #19 opened 9 years ago by chrta
  23

• Support for 1wire

  #18 opened 9 years ago by patrykk
  1

• UDOO crash when connecting HDMI cable during operation (DVI)

  #10 opened 9 years ago by chrta
  19

• error How to install

  #17 opened 9 years ago by alfwro13
  1

• analog audio

  #9 opened 9 years ago by DrJulia
  5

• udoo's wlan unstable on 4.0 kernel

  #15 opened 9 years ago by spinxz
  9

• GPIO Output

  #16 opened 9 years ago by gicardous
  3

• Dependency on CONFIG_ARM_IMX6Q_CPUFREQ missing

  #13 opened 9 years ago by chusopr
  1

• Arduino IDE reports "no device found on ttymxc3".

  #8 opened 9 years ago by patrykk
  6

• LVDS problem

  #14 opened 9 years ago by patrykk
  0

• How To Use FlexCAN

  #4 opened 9 years ago by ctassell
  5

• mxc_v4l2_capture compiler error with 4.0 branch

  #11 opened 9 years ago by spinxz
  7

• imx-hdmi-audio imx-hdmi-audio: HDMI Video is not ready!

  #12 opened 9 years ago by spinxz
  1

• Udoo Cooling Fan Controller.

  #5 opened 9 years ago by moonlinux
  1

• max17135-regulator.c does not compile

  #7 opened 9 years ago by chrta
  3

• make menuconfig fails

  #6 opened 9 years ago by chrta
  1

• tv restart crashes udoo

  #3 opened 10 years ago by fishman
  3

• /dev/mxc_vpu does not exist

  #2 opened 10 years ago by fishman
  2

• kernel does not boot

  #1 opened 10 years ago by cloc3
  5